• Journal of radiological science and technology
• /
• v.31 no.1
• /
• pp.55-60
• /
• 2008

Purpose: This study is to decide a quality control and calibration period of LCD display devices used for reading diagnostic images. Materias and Methods: The assessment test of 20 flat panel LCD color display devices used for reading diagnostic images were performed based on AAPM TG 18 protocol over the total six sessions at one month intervals from three months after primary calibration, in terms of geometric distortion, reflection test, luminance response evaluation, luminance uniformity, resolution, noise, veiling glare and chromaticity test. Results: The results of geometric distortion, reflection test, luminance uniformity, resolution, noise, veiling glare and chromaticity test were within the criteria recommended by AAPM TG 18, except for luminance response evaluation. In the measured luminance deviation of luminance response evaluation, 4(25%) of 20 display devices were passed a criterion from four months after calibration, and 11 (55%) were passed from eight months. Also in the contrast response of the luminance response evaluation, 1(5%) display device was passed a criterion from four months after calibration, and 3(15%) were passed from eight months. Conclusion: Considering the passing deviation after calibration, the time required and a manpower, the quality control and calibration period of LCD display devices used for reading diagnostic images should be a three months and six months after calibration.

• Journal of Environmental Science International
• /
• v.22 no.11
• /
• pp.1499-1508
• /
• 2013

In the results of investigating the role of LED light quality in enhancing the ornamental value of indoor foliage plants, amber and red light increased plant height, leaf width, and leaf stalk, and the consequent tree shape decreased the ornamental value. The chlorophyll content increased significantly under white light and compound light. With regard to the effect of plant leaf color on ornamental value, the value of lightness was markedly enhanced by red light. As to the functionality of plants according to photosynthetic activity, plants such as Dieffenbachia, Clusia, and Dracaena were found favorable to those staying indoors for a longtime from morning to evening. Spathiphyllum, and Ficus were found to be recommendable for indoor spaces used actively during afternoon because their photosynthesis was activated in the afternoon. With regard to power consumption according to light quality, white light consumed 119 W/hour, around 45% lower than that of fluorescent lamps, so it is considered the optimal artificial light quality that can enhance energy efficiency. Red light consumed 72 W/hour, only 33% of that of fluorescent lamps, but it was not considered the optimal light quality because plant growth was poor under the light quality. White light and compound light were found to be the ideal light sources for improving the functionality and ornamental value of indoor plants and reducing the cost of maintenance, but because compound light hinders people from recognizing the original color of plants and makes their eyes easily tired, white light was considered the optimal light satisfying all of the ornamental value, economic efficiency and functionality resulting from plant growth.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2523-2528
• /
• 2012

Green phosphors $(Zn_{1-a-b}M_aM^{\prime}_b)_xGa_yS_{x+3y/2}:Eu^{2+}$ (M, M' = alkali earth ions) with x = 2 and y = 2-5 were prepared, starting from ZnO, MgO, $SrCO_3$, $Ga_2O_3$, $Eu_2O_3$, and S with a flux $NH_4F$ using a conventional solidstate reaction. A phosphor with the composition of $(Zn_{0.6}Sr_{0.3}Mg_{0.1})_2Ga_2S_5:Eu^{2+}$ produced the strongest luminescence at a 460-nm excitation. The observed XRD patterns indicated that the optimized phosphor consisted of two components: zinc thiogallate and zinc sulfide. The characteristic green luminescence of the $ZnS:Eu^{2+}$ component on excitation at 460 nm was attributed to the donor-acceptor ($D_{ZnGa_2S_4}-A_{ZnS}$) recombination in the hybrid boundary. The optimized green phosphor converted 17.9% of the absorbed blue light into luminescence. For the fabrication of light-emitting diode (LED), the optimized phosphor was coated with MgO using magnesium nitrate to overcome their weakness against moisture. The MgO-coated green phosphor was fabricated with a blue GaN LED, and the chromaticity index of the phosphor-cast LED (pc-LED) was investigated as a function of the wt % of the optimized phosphor. White LEDs were fabricated by pasting the optimized green (G) and the red (R) phosphors, and the commercial yellow (Y) phosphor on the blue chips. The three-band pc-WLED resulted in improved color rendering index (CRI) and corrected color temperature (CCT), compared with those of the two-band pc-WLED.

• Journal of the Korean Applied Science and Technology
• /
• v.23 no.3
• /
• pp.243-251
• /
• 2006

Field emission display(FED) is actively investigated in view of the development of full color flat-panel display, which can replace some cathode-ray tube(CRT). Thus, the development of new phosphors appropriate for FED is urgently needed and has been actively investigated. In this work, $SrTiO_3:Pr^{3+}$ phosphor was prepared by sol-gel method and the coating was applied by sol-gel method combined with sonication on these phosphor's surface into diluted precursor solution. It was found that very fine particles of coating material were formed on phosphor's surface. The luminescent intensity of $SrTiO_3:Pr^{3+}$ phosphor coated with $SiO_2$ and $Al_2O_3$ was considerably increased without any noticeable change in color chromaticity. The optimum concentration of coating material was found to be 1wt% and the optimum pH value of the solution was 10.

• Proceedings of the KIEE Conference
• /
• 2008.10b
• /
• pp.262-263
• /
• 2008

LCD 디바이스는 그 동작원리와 전기-광학적 특성에 의해 CRT와는 다른 감마곡선 특성을 갖고 있다. 대부분의 LCD디스플레이 디바이스들의 감마곡선은 CRT와는 달리 일관성을 갖지 않을 뿐 더러 흑백계조입력을 기준으로 하는 감마보정을 위해 RED, GREEN, BLUE 입력값을 세부적으로 조정할 때 각 계조입력에 대한 상관색온도가 일정한 값을 갖지 않아 LCD의 특성에 대한 모델링과 보정에 어려움이 있다. 또한, 애플사의 맥머신 그리고 실리콘 그래픽스사의 시스템과 같이 소정의 감마값을 전제로 해당 시스템의 내부참조테이블(internal look-up table)이 설계되어 각기 다른 시스템감마를 가지는 장치들에 의해 인코딩되어진 영상출력신호의 경우, 동일한 시스템을 갖추거나 시스템감마에 대한 역감마특성을 가진 디스플레이장치가 아닌 환경에서는 원본영상에 대한 왜곡은 더욱 커질 수 있다. 특히, 낮은 흑백계조입력에서의 색온도의 경우, 파장에 따라 서로 다른 감쇄성능을 가진 일반적인 컬러필터의 특성에 의한 누설광(light leakage)에 의해 결정되며, 이로 인해 색온도가 특정한 객을 띄는 현상이 발생한다. 본 논문에서는 LCD디스플레이의 감마곡선을 여러 가지 시스템감마에 대응할 수 있는 감마곡선예 일치시키고, 계조선형성을 동시에 개선하기 위하여 입력 디지털값과 삼자극치간 관계를 나타내는 여러 가지 컬러모델링 방법 중에서 PLCC(Piecewise Linear Interpolation assuming Constant Chromaticity coordinates)모델을 적용하고, 목표로 하는 감마곡선과 색온도를 만족하기 위한 새로운 입력값을 구한 후 이를 컬러참조테이블(color look-up table)예 적용하는 방법과 저계조에서의 색온도를 목표색온도에 근접시키는 방법을 제안한다.

• The Journal of Korean Physical Therapy
• /
• v.18 no.3
• /
• pp.79-87
• /
• 2006

Purpose: The present study purposed to examine induced characteristic or erythema and safety by medium wave ultra violet(UVB) lamp. Methods: We compared sunshine and UVB lamp using spectroradiometer and UV radiometer. For measuring sunshine irradiation, we used spectoradiometer and detected from 8 to 18 o'clock every each hour on the beach, playground and rooftop of a 5 story building. The subjects for erythema examination were 5 healthy subjects who have no pathologic history of photosensitivity reaction, psoriasis and vitiligo. They were exposed to UVB radiation at the abdominal area for 2 hours and after irradiation, we observed the change of skin color every 12 hours over a period of 1 week. Results: Between sunshine and UVB lamp, sunshine had higher data on the chromaticity coordinates, dominant and peak wavelength, bandwidth and purity than the UVB lamp but on the color temperature, brightness the UVB lamp had higher data than the sunshine. In comparison of sunshine and UVB lamp, UVB lamp irradiated constantly such as $3.9-4.4{\mu}W/cm^2$ at a distance of 100cm between bed and lamp which was same as early morning irradiation on the sunshine. The erythema didn't appear to any subject. Conclusion: This results suggest that the UVB lamp has lower irradiance as much as early sunshine. Therefore the UVB lamp had no influence of inducing erythema at a distance of 100cm between bed and lamp.

• The KIPS Transactions:PartB
• /
• v.16B no.3
• /
• pp.215-224
• /
• 2009

A film colored overlay has been used as an assistive device for dyslexics, Recently, several virtual colored overlays which can be used in computer were developed. But existing virtual overlays have some drawbacks which have limited colors and limited control capability over overlapped window by the overlays. Limited colors may prevent optimum color selection and limited control capability can obstruct to transfer keyboard and mouse operation to the overlapped window. In this paper, we implemented an overlay function which controls an overlapped window under the overlay window by using keyboard hooking and tray icon. We propose a method to determine the source color of a virtual overlays by estimating alpha value of alpha blending algorithm through measurement of the chromaticity and transmissivity of film overlays and implemented all colors which we can produce colors by using Intuitive Overlays. Test results of the developed virtual overlay show that all mentioned drawbacks of existing virtual overlays were eliminated. Therefore we can employ a result of WRRT to use the developed overlays.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.620-626
• /
• 2017

This study conducted chemical and physical hazard analysis on the acidity, peroxide value, color removal, and limit criteria of metal detector of roasted laver. The Hunter color L- and a-value of roasted laver was higher than the control, and the b-value was higher at $400^{\circ}C$. The limit criteria establish by metal detector was determined to a sensitivity of 60 because it detected 100% in a sensitivity of 60 to Fe and Sus. The acidity and peroxide values increased with increasing temperature. These results confirmed that roasted laver is safe when roasted to $300^{\circ}C$ for 5 seconds.

• International Journal of Computer Science & Network Security
• /
• v.23 no.3
• /
• pp.177-186
• /
• 2023

Hyperspectral imaging technology is one of the most efficient and fast-growing technologies in recent years. Hyperspectral image (HSI) comprises contiguous spectral bands for every pixel that is used to detect the object with significant accuracy and details. HSI contains high dimensionality of spectral information which is not easy to classify every pixel. To confront the problem, we propose a novel RGB channel Assimilation for classification methods. The color features are extracted by using chromaticity computation. Additionally, this work discusses the classification of hyperspectral image based on Domain Transform Interpolated Convolution Filter (DTICF) and 3D-CNN with Bi-directional-Long Short Term Memory (Bi-LSTM). There are three steps for the proposed techniques: First, HSI data is converted to RGB images with spatial features. Before using the DTICF, the RGB images of HSI and patch of the input image from raw HSI are integrated. Afterward, the pair features of spectral and spatial are excerpted using DTICF from integrated HSI. Those obtained spatial and spectral features are finally given into the designed 3D-CNN with Bi-LSTM framework. In the second step, the excerpted color features are classified by 2D-CNN. The probabilistic classification map of 3D-CNN-Bi-LSTM, and 2D-CNN are fused. In the last step, additionally, Markov Random Field (MRF) is utilized for improving the fused probabilistic classification map efficiently. Based on the experimental results, two different hyperspectral images prove that novel RGB channel assimilation of DTICF-3D-CNN-Bi-LSTM approach is more important and provides good classification results compared to other classification approaches.

• Journal of the East Asian Society of Dietary Life
• /
• v.15 no.1
• /
• pp.91-99
• /
• 2005

The effect of medicinal herb powder addition on the physicochemical characteristics of silk-tofu was investigated. Moisture content of silk-tofu decreased during the storage. The pH value of silk-tofu decreased a little until 2 days' storage, and then increased rapidly. The chromaticity of L value decreased for all silk-tofu during the storage. The a value increased a little at initial storage, and then tended to decrease, while b values increased significantly during storage. The contents of free amino acid were 4 times higher in silk-tofu than those in market tofu. Hardness, gumminess and chewiness of all silk-tofu increased rapidly during storage. Cohesiveness values decreased a little at initial storage, and then kept to increase upon storage. Generally, the total plate counts of bacteria of all silk-tofu increased during storage, and those of silk tofu with added medicinal herb powder were shown to be significantly lower than those in control. In sensory evaluation, color, structure, softness and overall acceptability of silk tofu with added dangui powder(dang-T) and control(con-T) were about to be high, and nutty taste and flavor of control silk-tofu was the highest in score.