• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.151-156
• /
• 2009

Samhaeju is a traditional Korean noble rice wine, in which its processing is performed at low temperatures for an extended fermentation time and with three brewing steps. In this study, Samhaeju was prepared by different brewing methods that were modified from the method in the literature. Chemical composition of samples were determined to evaluate the quality of the Samhaeju. The Samhaeju was analyzed for pH, total acids, amino nitrogen, Hunter color values, free sugars, organic acids, and volatile components. Before the addition of the second and third mashing, pH values had decreased slightly and total acids had rapidly increased. Free sugar and amino nitrogen contents were high in final product. After addition of the third mashing as the advanced step, a dilution effect was shown. Glucose (A: 0.77-7.0%, B: 0.77-3.81%) was a major free sugar, and lactic acid (A: 0-2,840mg%, B: 0-3,375mg%) was a major organic acid during the entire period of fermentation. Based on principal component analysis of electronic nose data for the components, the stages of Samhaeju fermentation were primarily separated along the first principal component (PC, proportion : 98.67%). The first PC component (PC1) was moved from negative value(-6.16) to positive value(9.00) with increasing fermentation time. The change patterns for pH and total acid during the fermentation period were similar to those of PC1 from the data obtained by electronic nose based on mass spectrometry.

• Korean Journal of Food Science and Technology
• /
• v.41 no.2
• /
• pp.186-190
• /
• 2009

Four different mixing ratios of Rose rugosa Thun and Vitis amurensis (Moru) were prepared. These included Rose rugosa Thun two vs. Moru one (Moru 33), Rose rugosa Thun one vs. Moru two (Moru 67), Rose rugosa Thun one vs. Moru five (Moru 83), and Moru (Moru 100). Their physiochemical changes were investigated during 28 days of fermentation followed by aging. The final brix, pH, and total titratable acidity values of the four experiments were in the following ranges: 6.0-8.2$^{\circ}$Bx, 3.87-4.03, and 0.94-1.18%, respectively. Final ethanol contents were 6.5% in Moru 33, 11.8% in Moru 67, 11.1% in Moru 83, and 11.4% in Moru 100. As the amount of Rose rugosa Thun increased, anthocyanin content, color intensity, organic acid, and free amino acid concentrations were reduced. These findings demonstrate that the supplementation of Rose rugosa Thun to Moru prior to alcohol fermentation may help change the acidity, colour, and taste in the final product.

• Korean Journal of Food Science and Technology
• /
• v.42 no.1
• /
• pp.21-26
• /
• 2010

Microbial-fermented tea (MFT), which is made by microorganisms through fermentation, is a popular beverage in Asia, especially in the Yunnam province, China. In this study, changes of the chemical constituents and antioxidant activity during the manufacturing process of MFT were investigated. MFT were respectively prepared from fresh leaves of three different tea species (Yabukita, Daecha, and Korean wild cultivar) and a processed green tea (Korean wild cultivar). The color of the tea infusions gradually changed to red and yellow as a function of fermentation time. Total nitrogen and caffeine contents were not significantly changed. Whereas, the chlorophyll, tannin, and total catechins contents gradually decreased. Interestingly, the epicatechin and epigallocatechin contents increased up to 25 days of fermentation and then decreased. Change of the chemical constituents of all samples showed the same patterns. The antioxidant activity of MFT from Daecha and Yabukita slightly decreased as increasing fermentation time. However, the range over which the antioxidant activity of MFT from Korean wild cultivar and green tea were not changed. This research suggests that it may be possible to manufacturing possibility of MFT using Korean wild cultivar and processed green tea.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.217-226
• /
• 2008

Product quality of low-fat sausages(LFSs) manufactured with two types(powder and hydrated) and two levels(0.5 and 1.0%) of Acorn powder was evaluated as a potential fat replacer. The addition of Acorn powder did not affect the product quality of LFSs (P>0.05), however 0.5% and hydrated Acorn was better sensory flavor than 1.0% and powder counterparts. The addition of Acorn into the LFSs decreased the expressible moisture(%) except for 0.5% powder type and decreased Hunter L-values in LFSs. The addition of 1.0% hydrated Acorn lowered sensory saltiness than those of other LFSs and regular-fat control. These results indicated that Acorn powder can be used to manufacture LFSs as a fat replacer and 0.5% with hydrated form had better characteristics than 1.0% and powder counterparts. Future research will be performed to prevent the color change with the addition of Arcon powder in LFSs.

• Korean Journal of Food Science and Technology
• /
• v.49 no.5
• /
• pp.532-537
• /
• 2017

The purpose of this study was to examine the best cooking condition to decrease 4'-O-methylpyridonxine (MPN, ginkgotoxin) and increase the antioxidative effect. We also examined the change in color of ginkgo biloba seeds after different cooking methods and times. MPN content was decreased with an increase in the cooking time. For the reduction of MPN content, the most efficient cooking method was pan-frying. In particular, MPN content was largely reduced after 8 min of pan-frying. 1,1-Diphenyl-2-picrylhydrazyl radical scavenging activity and total flavonoid content were increased after 11 min of pan-frying and this level was maintained until 14 min. The total phenolic compound content was maintained for up to 30 min by steaming and 11 min by pan-frying. Therefore, the optimum condition was established by pan-frying from 8 to 11 min.

• Horticultural Science & Technology
• /
• v.17 no.2
• /
• pp.115-117
• /
• 1999

Tomato (Lycopersicon esculentum) fruits were grown by the hydroponic cultivation system using perlite and soil cultivation system. The growth, yield, and fruit quality were compared between two growing seasons of spring and summer and two cultivation systems, respectively. In tomato, little difference was observed in growth and yield between two cultivation systems, but plant growth and total yield of fruits were much more in summer than in spring. The contents of glucose and fructose were more in spring-grown fruit than in summer-grown one, and in hydroponically cultivated fruit than in soilcultivated, respectively. The weight loss during room temperature storage was lower in hydroponically cultivated fruit than in soil-cultivated one, and in summer-grown fruit than in spring-grown one, respectively. In terms of color change, the shelf-life of tomato fruit was shorter by one day in summer-grown one fruit than in spring-grown one, and in hydroponcically cultivated one fruit than in soil-cultivated, respectively.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.3
• /
• pp.241-249
• /
• 2002

In this research, we targeted to see if there was difference of shelf$.$lives of two different species cucumber. We pickled domestic and exporting cucumber to make comparison while they were fermented and stored. As for the domestic cucumber we choose CHICHEONG and for the exporting cucumber we choose special BAEKSEONG and SHARP 1. We blanched them and soaked them into hot saline water for 8 hours. Two kinds of Cucumber Kimchi were at room temperature for first day and 5'c from 2nd to 28th day. It was found, from the results, that all of samples of pH reached at 3.5 $\pm$ 0.1 on the 14th day of fermentation. The titratable acidity of the control increased on 14th day of fermentation, which was bit late than change of others. The reducing sugar contents of the control did not decrease until 7th day of fermentation while reducing sugar contents of others decreased gradually from the beginning. The patterns of Microfloral changes of two kinds of Cucumber Kimchi were similar during fermentation period. The number of total cell increased up to 14th day, similary the numbers of lactic acid bacteria increased up to 14th day then barely decreased. The hardness of the control was bit higher than others when it was measured on 14th day of fermentation. The sensory evaluation of Cucumber Kimchi with different species showed that both species had siginificant high negative scores in green color and crispness when those were compared between fermentation time and samples.

• The Korean Journal of Food And Nutrition
• /
• v.28 no.6
• /
• pp.1071-1081
• /
• 2015

Environment-friendly agricultural products are consumed widely, but little is known about consumers' acceptability. The objectives of this study were to 1) determine consumers' acceptability of cucumber when consumed raw, 2) determine differences in appearance liking between environment-friendly and conventionally grown cucumber samples, and 3) analyze the physicochemical properties of cucumber. White dadagi, gasi, non-pesticide mini cucumber, organic gasi, and organic Joseon cucumber samples were evaluated for consumers' acceptability using a nine-point hedonic scale; White dadagi, organic Joseon, and organic gasi cucumber samples showed the highest acceptability scores. However, there were three consumer segmentations differing their degree of cucumber liking and preference. Consumers liked the appearance of organic gasi best. Consumers' preference of cucumbers did not change upon evaluation of the acceptability of the appearance of whole fruit with and without a label indicating an environment-friendly status. Additionally, the physicochemical properties of the cucumbers-including color (skin and flesh), length, circumference, weight, water activity, brix, and texture (hardness and fracturability)-were measured. All measurements showed significant differences among samples, with the exception of water activity and hardness. White dadagi was 3.8 brix, which was the highest among cucumbers, followed by non-pesticide mini cucumber and organic Joseon. White dadagi, organic Joseon, and organic gasi showed greater fracturability than the other cucumber samples.

• Journal of Digital Convergence
• /
• v.14 no.2
• /
• pp.183-190
• /
• 2016

This paper proposes algorithm to reduce the computing time in a neural network that reduces transmission of data for tracking mobile objects in surveillance networks in terms of detection and communication load. Object Detection can be defined as follows : Given image sequence, which can forom a digitalized image, the goal of object detection is to determine whether or not there is any object in the image, and if present, returns its location, direction, size, and so on. But object in an given image is considerably difficult because location, size, light conditions, obstacle and so on change the overall appearance of objects, thereby making it difficult to detect them rapidly and exactly. Therefore, this paper proposes fast and exact object detection which overcomes some restrictions by using neural network. Proposed system can be object detection irrelevant to obstacle, background and pose rapidly. And neural network calculation time is decreased by reducing input vector size of neural network. Principle Component Analysis can reduce the dimension of data. In the video input in real time from a CCTV was experimented and in case of color segment, the result shows different success rate depending on camera settings. Experimental results show proposed method attains 30% higher recognition performance than the conventional method.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.