• Journal of Auto-vehicle Safety Association
• /
• v.12 no.2
• /
• pp.40-46
• /
• 2020

Modern traffic accidents are a complex occurrence. Various indicators are needed to analyze traffic accidents. Countries that have been investigating traffic accidents for a long time accumulate various data to analyze traffic accidents. The Korean In-Depth Accident Study (KIDAS) database collected damaged vehicles and severity of injury caused by Collision Deformation Classification code (CDC code), Abbreviated Injury Scale (AIS), and Injury Severity Score (ISS). As a result of the investigation, data relating to the injuries of the occupants can be easily obtained, but it was difficult to analyze human severity based on the information of the damaged vehicle. This study suggests a method to measure the speed change at the time of an accident, which is one of the most important indicators in the vehicle crash database, to help advance KIDAS research.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.69-76
• /
• 2012

Theoretical backgrounds on the experimental methods of explosive welding, explosive forming and shock consolidation of powders are introduced. Explosive welding experiments of titanium (Ti) and stainless steel (SUS 304) plate were carried out. It was revealed that a series of waves of metal jet are generated in the contact surface between both materials; and that the optimal collision velocity and collision angle is about 2,100~2,800 m/s and $15{\sim}20^{\circ}$, respectively. Also, explosive forming experiments of Al plate were performed and compared to a conventional press forming method. The results confirmed that the shock-loaded Al plate has a larger curvature deformation than those made using conventional press forming. For shock consolidation of powders, the propagation behaviors of a detonation wave and underwater shock wave generated by explosion of an explosive are investigated by means of numerical calculation. The results revealed that the generation and convergence of reflected waves occur at the wall and center position of water column, and also the peak pressure of the converged reflected waves was 20 GPa which exceeds the detonation pressure. As results from the consolidation experiments of metal/ceramic powders ($Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$), shock-consolidated $Fe_{11.2}La_2O_3Co_{0.7}Si_{1.1}$ bulk without cracks was successfully obtained by adapting the suggested water container and strong bonding between powder particles was confirmed through microscopic observations.

• The Journal of the Petrological Society of Korea
• /
• v.28 no.2
• /
• pp.53-69
• /
• 2019

In the Jirisan area of the Yeongnam Massif, Korea, several ductile shear zones are developed within Precambrian gneiss complex (Jirisan metamorphic rock complex). The ductile shear zones have a general NS- and NNE-striking foliation with westward dipping directions. The foliation developed in the shear zones cut the foliation in gneiss complex. The stretching lineations are well developed in the foliated plane of the shear zone, showing ENE-trend with gentle plunging angle to the ESE direction. Within shear zone, several millimetric to centimetric size of porphyroclasts are deformed strongly as a sigmoid form by ductile shearing. The sigmoid patterns of porphyroclasts in the shear zones indicate the dextral shearing. The spatial distribution of ductile shear zone is characterized by the dominant NS- and NNE-striking dextral sense in the central and eastern regions respectively. In the western part, it develops in NE-striking dextral sense which is the general direction of the Honam shear zone. The U-Pb concordant ages obtained from the two samples, the strongly sheared leucocratic gneiss, are $1,868{\pm}3.8Ma$ and $1,867{\pm}4.0Ma$, respectively, which are consistent with the U-Pb ages reported around the study area. We supposed that the ductile shearing in the study area is occurred about 230~220 Ma during late stage of the continental collision around Korea and is preceded by granitic intrusion related to subduction during 260~230 Ma, which are supported by compiling the age data from sheared gneiss, deformed mafic dyke intruded gneiss complex, and non-deformed igneous rocks.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.8
• /
• pp.80-87
• /
• 2008

This paper investigated into the impact characteristics of the stainless sheet with thickness of 0.7 mm on the stretching boundary condition through three-dimensional finite element analysis. High speed tensile tests were carried out to obtain strain-stress relationships with the effects of the strain rate. The FE analysis was performed by the ABAQUS explicit code. In order to improve an accuracy of the FE analysis, the hyper-elastic model and the damping factor were introduced. Through the comparison of the results of the FE analyses and those of the impact tests, a proper FE model was obtained. The results of the FE analyses showed that the absorption rate of energy maintains almost 82.5-83.5% irrespective of the impact energy level and the diameter of the impact head. From the results of FE analyses, variations of stress, strain, dissipation energy, strain energy density, and local deformation characteristics in the stainless sheet during the collision and the rebound of the impact head were quantitatively examined. In addition, it was shown that the fracture of the specimen occurs when the plastic strain is 0.42 and the maximum value of the plastic dissipation energy of the specimen is nearly 1.83 J.

• Journal of KIISE:Software and Applications
• /
• v.37 no.8
• /
• pp.611-619
• /
• 2010

This paper presents an efficient modeling system of virtual pottery in which the user can deform a body of virtual clay with a haptic tool for E-learning. We propose a Circular Sector Element Method (CSEM) which represents the virtual pottery with a set of circular sector elements based on the cylindrical symmetry of pottery. Efficient algorithms for collision detection and response, interactions between adjacent elements, and GPU-based visual-haptic synchronization are designed and implemented for the CSEM. Empirical evaluation showed that the modeling system is computationally efficient with finer details and provides convincing model deformation and force feedback. The developed system, if combined with educational contents, is expected to be used as an effective E-learning platform for elementary school students.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.1
• /
• pp.20-26
• /
• 2018

The fatality of rollover accidents in motor vehicle crashes is high despite their low incidence. Through the investigation of a 12-passenger van rollover accident in which 10 passengers were involved, we intend to analyze the correlation between the severity of the injury and the position of the occupants. We collected accident information from medical records, interviews, photo-images of the damaged van, field surveys, and the results of the Korean New Car Assessment Program (KNCAP). Based on the occupants' position, we classified injury sites and estimated injury severity. Passenger injury severity was evaluated by trauma score calculation. The initiation type of the rollover accident was passenger side 'fall-over' and the Collision Deformation Classification (CDC) code for the damaged van was 00TDZO3. The crash of the van involved 10 passengers, with an average age of $16.3{\pm}4.2years$. Few of the occupants had fastened seat belts at the time of the incident, and there was no airbag installed. One patient sustained severe liver injury and another was diagnosed with a fracture of the right humerus. The most common injuries were at the upper extremities and the neck. The average of Injury Severity Score (ISS) was $4.8{\pm}5.9$, and the average ISS of right-seated, mid-seated and left-seated occupants was $7.5{\pm}9.3$, $1.5{\pm}0.7$, and $3.3{\pm}2.1$ respectively (p>0.05). In the rollover (to-passenger side) accident of occupant unfastened, the average ISS of right-seated occupants (near side) was higher, but there was no statistically significant difference.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.12
• /
• pp.682-691
• /
• 2004

We present a novel haptic sculpting system where the user intuitively adds to and carves out material from a volumetric model using new sculpting tools in the similar way to handling real clay Haptic rendering and model deformation are implemented based on volumetric implicit surface. We enhance previous volume-based haptic sculpting systems by presenting fast and stable force computation on 3D models to be deformed. In order to bridge the gap between fast haptic process (1 KHz) and much slower visual update frequency(~30Hz), the system generates intermediate implicit surfaces between two consecutive physical models being deformed. It performs collision detection and force computation on the intermediate surface in haptic process. The volumetric model being sculpted is visualized as a geometric model which is adaptively polygonized according to the surface complexity. We also introduce various visual effects for the real-time sculpting system including mesh-based solid texturing, painting, and embossing/engraving techniques.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.5-5
• /
• 2021

최근 기후변화로 인해 예측이 어려운 국지성 호우가 빈번하게 발생하고 있다. 국지성 호우는 대량의 홍수를 일으키고 산사태와 유송잡물을 동반한 흐름을 야기할 수 있으며 이로 말미암아 인근의 초목과 식생들로부터 유목(driftwood)이 발생하기도 한다. 유목이 흐름과 함께 떠내려 오게 되면 그로 인한 운동에너지가 크게 발생하게 되며, 수공구조물과 주택가옥 등에 충돌시, 순수한 수류의 충돌보다 훨씬 큰 손상을 주기도 한다. 또한 유목이 수공구조물 인근 하상에 군집하면 통수능을 저하시키기도 하며 식생효과와 마찬가지로 유목주변으로 유속이 증가하면서 세굴현상이 발생하게 되는데, 이는 하상저하를 일으키며 수공구조물의 안정성에 지속적으로 피해를 줄 수 있다. 특히 군집된 유목들이 교각에 충격을 주면 흐름방향으로 교각에 작용하는 외력을 증가시키게 되고 군집된 유목들이 다른 유목들을 연쇄적으로 포착하는 동시에 흐름을 지속적으로 방해하여 수위상승을 야기하게 된다. 이는 유목주변으로 세굴을 발생시켜 교량의 붕괴를 촉진시킬 수 있다. 일본의 경우에는 대부분의 하천유역의 경사가 매우 급하기 때문에 홍수발생시 산사태와 유송잡물들이 빈번하게 발생하고 있다. 그에 따라 대량의 유목들이 하천으로 유입되어 하천의 수공구조물과 주거지역에 심각한 피해를 주는 경우도 많다. 따라서 유목의 거동과 군집현상을 이해하여 사전에 유목거동의 예측과 유목과 하상변동의 상호작용 분석을 통해 유목에 의한 수리구조물 피해를 예측하는 연구들이 필요할 것으로 판단된다. 본 연구는 유목의 거동과 군집양상을 예측분석하기 위해 유목과 흐름의 이동상 실내실험과 수치해석을 수행하여 유목유입량에 따른 하상변동과 유목의 하상퇴적양상 및 다양한 거동을 관측분석 하였다. 특히, 유목간의 상호충돌과 측벽충돌을 고려하는 수치모듈을 유목동역학모형에 적용하여 수치해석을 수행하였다. 이를 통해 이동상 하상에서의 유목의 군집과정을 분석하고 수치해석의 한계와 개선사항들을 논의하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.715-726
• /
• 2023

This study suggested that protective panels should be installed as sacrificial members as a safety design method for structures with potential explosions such as hydrogen charging stations to minimize direct damage to the structure and have resilience. To this end, the focus of the experiment is on quantitatively evaluating the impact of the structure when the protection panel is installed closely or spaced apart from the structure in a high-speed collision situation of the projectile. The experimental design used steel plates instead of concrete structural members mainly used in the past for excellent reproducibility, and the impact of structural members was compared and analyzed through deformation differences on the back of the steel plate. In addition, the impact of changes in the physical properties of the elastic body used as a separation material for the protective member and the difference in shock wave transmission time according to the protective member and the elastic body on the structural member was investigated.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.169-193
• /
• 2016

In order to characterize the Neotectonic crustal deformation and current stress field in and around the Korean Peninsula and to interpret their tectonic implications, this paper synthetically analyzes the previous Quaternary fault and focal mechanism solution data and recent geotechnical in-situ stress data and examines the characteristics of crustal deformations and tectonic settings in and around East Asia after the Miocene. Most of the Quaternary fault outcrops in SE Korea occur along major inherited fault zones and show a NS-striking top-to-the-west thrust geometry, indicating that the faults were produced by local reactivation of appropriately oriented preexisting weaknesses under EW-trending pure compressional stress field. The focal mechanism solutions in and around the Korean Peninsula disclose that strike-slip faulting containing some reverse-slip component and reverse-slip faulting are significantly dominant on land and in sea area, respectively. The P-axes are horizontally clustered in ENE-WSW direction, whereas the T-axes are girdle-distributed in NNW direction. The geotechnical in-situ stress data in South Korea also indicate the ENE-trending maximum horizontal stress. The current crustal deformation in the Korean Peninsula is thus characterized by crustal contraction under regional ENE-WSW or E-W compression stress field. Based on the regional stress trajectories in and around East Asia, the current stress regime is interpreted to have resulted from the cooperation of westward shallow subduction of the Pacific Plate and collision of Indian and Eurasian continents, whereas the Philippine Sea plate have not a decisive effect on the stress-regime in the Korean Peninsula due to its high-angle subduction that resulted in dominant crust extension of the back-arc region. It is also interpreted that the Neotectonic crustal deformation and present-day tectonic setting of East Asia commenced with the change of the Pacific Plate motion during 5~3.2 Ma.