• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.2 s.152
• /
• pp.166-173
• /
• 2007

Collision analysis problems between ship to ship can be generally classified into the external mechanics(outer dynamics) and internal mechanics(inner dynamics). The former can be also dealt with the concept of fluid-structure interaction and the use of rigid body dynamic program, depending on the ways handling the hydrodynamic pressure due to surrounding water. In this study, full scale ship collision simulation was carried out, such as a DWT 75,000 ton striking ship collided at right angle to the middle of a DWT 150,000 struck ship with 10 knots velocity, coupling MCOL, a rigid body mechanics program for modeling the dynamics of ships, to hydrocode LS-DYNA. It could be confirmed that more suitable damage estimation would be performed in the case of the collision simulations with consideration of surrounding water through the comparison with the collision simulation results of fixed struck ships without it. Through this study, the opportunity could be obtained to establish a more effective ship collision simulation technique between ship to ship.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.4
• /
• pp.224-229
• /
• 2010

Collision fragility analysis of offshore bridge by ship was performed. Collision velocity and angle were chosen as random variables then collision of 18,000DWT and 30,000DWT ships with bridge was analyzed. Displacement response surface of bridge by ship collision was estimated by varying ship velocity from 2 m/s to 7 m/s. Using the result of reliability analysis, fragility curves of collision was established and risk of offshore bridge to collision velocity as median and log-standard deviation was presented.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.502-512
• /
• 2016

The wireless carrier sense multiple access with collision detection (WCSMA/CD) and carrier sense multiple access with collision resolution (CSMA/CR) protocols are considered representative distributed collision detection protocols for fully connected dense wireless local area networks. These protocols identify collisions through additional short-sensing within a collision detection (CD) period after the start of data transmission. In this study, we analyze their throughput numerically and show that the throughput has a trade-off that accords with the length of the CD period. Consequently, we obtain the optimal length of the CD period that maximizes the throughput as a closed-form solution. Analysis and simulation results show that the throughput of distributed collision detection protocols is considerably improved when the optimal CD period is allocated according to the number of stations and the length of the transmitted packet.

• Journal of Communications and Networks
• /
• v.17 no.3
• /
• pp.275-285
• /
• 2015

To improve the efficiency of carrier sense multiple access (CSMA)-based medium access control (MAC) protocols, CSMA with collision resolution (CSMA/CR) has been proposed. In the CSMA/CR, a transmitting station can detect a collision by employing additional sensing after the start of a data transmission and then resolve the next collision that might occur by broadcasting a jam signal during a collision detection (CD) period. In this paper, we analyze the delay of a CSMA/CR based on a generic p- persistent CSMA model and obtain the minimum achievable delay of the CSMA/CR by finding the optimal length of the CD period according to the number of contending stations. Through this delay analysis, we also investigate the throughput-delay characteristics of the CSMA/CR protocol according to various parameters. Analysis and simulation results show that the CSMA/CR has a considerably lower delay and its throughput-delay characteristic is significantly improved than the conventional CSMA/CA and wireless CSMA/CD protocols.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.918-927
• /
• 2022

The purpose of this study was to investigate the causes of collisions by examining 668 cases of merchant ship collision accidents that occurred during the past 12 years (2010-2021) and analyzed them statistically. Further, the analysis results were applied to propose a human error prevention collision avoidance (HEPCA) model. The statistical annual report of the Korea Maritime Safety Tribunal (KMST) and the collision investigation report were investigated to collect data on the causes of collisions of merchant ships, and frequency analysis was performed using the statistical analysis tool, SPSS Statistics. In the first-stage analysis, the causes of collisions were analyzed targeting 668 merchant ship collision accidents, and in the second-stage analysis, the identified maximum frequency cause factors were analyzed in detail. The analysis results identified that 98 % of the cause of the collision was the human error of the navigator, and the highest frequency was in the order of neglect of look-out > violation of navigation regulations > improper maneuvering. The cause of the neglect of look-out was mainly neglecting continuous monitoring after the first recognition of the target ship. The HEPCA model for human error prevention was proposed by applying the analysis results to the collision case of the investigation report. The results of this study are expected to be used as educational materials at marine navigator educational institutions and in practice for avoiding collisions caused by human errors of navigators.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.89-94
• /
• 2004

Up to now a lot of the study on ship collision avoidance systems has proceeded actively. However the frequency of ship collision accidents didn't decreased. If there is collision risk in close quarters situation none the less manouvering ship for collision avoidance according to the system, only use of TCPA and DCPA as input factor for collision risk decision is not useful to avoiding collision action. For the recent 5 years by the analysis of first observation distance about approaching ship in domestic collision accidents, nearly $45\%$ of accidents is close first observation less than 2 miles. Therefor it is essential part for safety navigations to study for collision avoidance action in close encounter. In this paper, as foundation study of supporting collision avoidance manoeuvring for navigators, we proposed ship collision avoidance support model in close quarters situation through analysis of collision accidents for effective getting rid of the causes.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.120-127
• /
• 2001

The potential pollution problems resulting from tanker collision necessitate the requirement for an effective structural design and the development of relevant safety regulations. During a few decades, the great effort has been made by the international Maritime Organization and the Administration, etc, to reduce oil spillage from collision accidents. However there is still a need for investigation in the light of structural evaluation method for the experiments and rational analysis, and design development for an operational purpose of ships. This study aims for investigating a complicated structural response of bow structures of simplified models and oil carriers for assessing the energy dissipation and crushing mechanics of the striking vessels through a methodology of the numerical analysis for the various models and its design changes. Through these study an optimal bow construction absorbing great portion of kinetic energy at the least penetration depth prior to reach to the cargo area and an effective location of collision bulkhead are investigated. In order to obtain a rational results in this study, three stages of collision simulation procedures have been performed step by step as follows; 1) 16 simplified ship models are used to investigate the structural response against bow collision with variation of primary and secondary members. Mass and speed are also varied in four conditions. 2) 21 models consisted of 5 sizes of the full scaled oil carriers are used to perform the collision simulation with the various sizes and deadweight delivered in a recent which are complied with SOLAS and MARPOL. 3) 36 models of 100l oil carrier are used to investigate the structural response and its influence to the collision bulkhead against bow collision in variation with location of collision bulkhead, primary members, framing system and colliding conditions, etc. By the first study using simplified models the response of the bow collision is synthetically evaluated for the parameters influencing to the absorbed energy, penetration depth and impact force, etc.

• Journal of Navigation and Port Research
• /
• v.28 no.10 s.96
• /
• pp.827-832
• /
• 2004

Up to now a lot of the study on ship collision avoidance systems have proceeded actively. However the rate of ship collision accidents hasn't decreased yet. If there is collision risk in close quarters situation in spite of maneuvering ship for collision avoidance according to the system, only use of TCP A and DCP A as input factor for collision risk decision is not useful to avoiding collision action. For the recent 5 years by the analysis of first observation distance about approaching ship in domestic collision accidents, nearly $45\%$ of accidents is close first observation less than 2 miles. Therefore it is essential part for safety navigations to study for collision avoidance action in close encounter. In this paper, as a fundamental study of supporting collision avoidance maneuvering for navigators, we proposed ship collision avoidance support model in close quarters situation through analysis qf collision accidents to effectively get rid of the causes.

• Proceedings of the KSR Conference
• /
• 1998.05a
• /
• pp.361-368
• /
• 1998

Described in this paper is the result of a study on collision analysis of TGV-K using 1-dimensional model for crashworthy design. Crashworthy design of the front end is very important because majority of the impact energy (more than 70%) is absorbed by the crush of the front end when the train is collided with an obstacle like a tank lorry. Guideline for the crashworthy design can be described from the collision analysis of the whole train using a 1-dimensional model. Since the headstock of TGV-K is not designed in a crashworthy point of view, a conceptual design of the headstock to improve crashworthiness is suggested and evaluated using 1-dimensional collision analysis. The suggested design, which adopts an energy absorber and a crashworthy headstock, shows a good behaviour on the accident scenario of SNCF (collision at 110 km/hr against a movable rigid mass of 15 ton).

• Smart Structures and Systems
• /
• v.15 no.2
• /
• pp.299-314
• /
• 2015

Submersed rock-berm structures are frequently used for protection of underwater lifelines such as pipelines and power cables. During the service life, the rock-berm structure can experience several accidental loads such as anchor collision. The consequences can be severe with a certain level of frequency; hence, the structural responses should be carefully understood for implementing a proper structural health monitoring method. However, no study has been made to quantify the structural responses because it is hard to deal with the individual behavior of each rock. Therefore, this study presents a collision analysis of the submersed rock-berm structure using a finite element software package by facilitating the smoothed-particle hydrodynamics (SPH) method. The analysis results were compared with those obtained from the Lagrange method. Moreover, two types of anchors (stock anchor and stockless anchor), three collision points and two different drop velocities (terminal velocity of each anchor and 5 m/s) were selected to investigate the changes in the responses. Finally, the effect of these parameters (analysis method, anchor type, collision point and drop velocity) on the analysis results was studied. Accordingly, the effectiveness of the SPH method is verified, a safe rock-berm height (over 1 m) is proposed, and a gauge point (0.5 m above the seabed) is suggested for a structural health monitoring implementation.