• 제목/요약/키워드: cold treatment

검색결과 1,642건 처리시간 0.03초

현대금속공예용 동합금판의 재료분석과 형질변환 실험 및 응용에 관한 연구 (A Study of material analysis and its experimentation of metamorphosis and its utilities in Copper Alloy plates for contemporary metal craft)

  • 임옥수
    • 디자인학연구
    • /
    • 제17권4호
    • /
    • pp.241-250
    • /
    • 2004
  • 이 논문은 현재에 통용되고 있는 동합금판 C2200, C5210, C7701, C8113 등의 특징 및 용도와 소재의 재질적 특성을 data화하였고, 그 표현의 가능성을 조사하여 수치화하였고, 그 기법실험의 1단계로서 일반접합과 TIG 접합에 대하여, 2단계 실험으로서 망상조직기법과 전해주조기법에 대하여 농하였으며, 이 기법을 응용한, 연구작품의 3가지 사례를 다루었다. 이 때 사용한 동합금은 (주)풍산금속 소재기술연구소 이동우 박사가 지원한 4가지 동합금, 즉 단동, 스프링용 인청동, 스프링용 양백, 백동을 사용하여, 적층기법, 망상조직기법, 융합기법, 전해주조기법을 작품에 따라서 통합 또는 부분적으로 적용시켰다. C2200 의 경우, 황동은 2mm이하의 박판(薄板)에서는 교류 TIG 용접법이 좋으며 그 이상에서는 직류 정극성 TIG 용접법으로, 용접에 의한 잔류 응력부식을 열처리를 250~300도에서 행한다. C5210 의 경우는 고온의 환원성기(還元性氣)중에서도 수소(水素) 취성이 없고 고온에서 O를 흡수하지 않으며, 경화(輕化) 온도도 약간 높아, 용접용으로 매우 적합하다. 일반적으로 Sn을 2-9% P를 0.03-0.4%정도 포함하고 있는데, Sn의 함유량이 증가함에 따라 응고 온도 범위가 광범위해졌으며 용접후의 냉각 시, 열분열 방지에는 TIG용접의 용접속도를 빠르게, 용융지(溶融池)를 작게, 예열 온도는 200도로 하는 것이 좋다. C7701의 경우는 조성범위가 10-20% Ni, 15-30% Zn의 것이 많이 사용된다. 약 30% Zn 이상이 되면(${\alpha}+{\beta}$) 조직이 되어 점성이 낮아지고 냉간 가공성은 저하하나 열간 가공성은 좋다. 양백은 또한 전기저항이 높고 내열, 내식성이 좋다. C8113의 경우는 내해수성, 내마모성이 우수하며 고온 강도가 높고 백동은 10-30% 니켈을 포함하며 완전히 고용(固溶)해서 단상(單相)이 된다. 이 때문에 결정입(結晶粒)도 크게 되기 쉬우며, 구속이 강한 경우 미량의 Pb, P, S라는 분열 감수성이 높아진다.

  • PDF

한국표준질병사인분류중 한방내과영역의 분류체계 개선 및 진단명 구성에 관한 연구 (The Research about the Classification System Improvement and Cord Development of Korean Classification of Disease on Oriental Internal Medicine)

  • 이원철
    • 대한한방내과학회지
    • /
    • 제31권1호
    • /
    • pp.1-10
    • /
    • 2010
  • Objectives : It is necessary that the international classification of diseases (ICD) be examined in order to comprise the third revision of the Korean Classification of Disease on Oriental Medicine (KCD-OM) and disease classification in the oriental internal medicine field. It is essential that the selection, classification and definition of disease and pattern names of oriental concepts in internal medicine be clear. Since 2008, the fifth revision of the Korean Classification of Disease (KCD-5) has been used in Korea. It was required to use the reference classification from the Oriental medicine area based on the ICD-10. Methods : In this review, the necessity for, meaning of and content of the third revision are briefly described. The ICD system was reviewed and KCD-OM was reconstructed. How diagnosis in the oriental internal medicine area had changed is discussed. Review and Results : In 1973, the disease classification of oriental medicine was established the basis on the contents of Dongeuibogam. It was irrespective of the ICD. As to the classification system in the Oriental internal medicine field, systemic disease was comprised of wind, cold, warm, wet, dryness, heat, spirit, ki, blood, phlegm and retained fluid, consumptive disease, etc. Diseases of internal medicine comprised a system according to the five viscera and the six internal organs and followed the classification system of Dongeuibogam. The first and second revisions were of the classification system based on the curriculum in 1979 and 1995. In 1979, in the first revision, geriatric disease and idiopathic types of disease were deleted, and skin disease was included among surgery diseases. This classification was expanded to 792 small classification items and 1,535 detailed classification items to the dozen disease classes. In 1995, in the second revision, it was adjusted to 644 small classes and 1,784 detailed classification items in the dozen disease classes. KCD-OM3 did KCD from this basis. It added and comprised the oriental medical doctor's concept names of diseases considering the special conditions in Korea. KCD-OM3 examined the KCD-OMsecond revised edition (1994). It improved the duplex classification, improper classifications, etc. It is difficult for us to separate the disease names and pattern names in oriental medicine. We added to the U code and made one classification system. By considering the special conditions in Korea, 169 codes (83 disease name codes, 86 pattern name codes) became the pre-existence classification and links among 306 U codes of KCD-OM3. 137 codes were newly added in the third revision. U code added 3 domains. These are composed of the disease name (U20-U33, 97 codes), the disease pattern name (U50-U79, 191 codes) and the constitution pattern name of each disease (U95-U98, 18 codes). Conclusion : The introduction of KCD-OM3 conforms to the diagnostic system by which oriental medical doctors examine classes used with the basic structure of the reference classification of WHO and raises the clinical study and academic activity of the Korean oriental medicine and makes the production of all kinds of nation statistical indices possible. The introduction of KCD-OM3 promotes the diagnostic system by which doctors of Oriental medicine examine classes using the association with KCD-5. It will raise the smoothness and efficiency of oriental medical treatment payments in the health insurance, automobile insurance, industrial accident compensation insurance, etc. In addition, internationally, the eleventh revision work of the ICD has been initiated. It needs to consider incorporating into the International Classification of Diseases some of every country's traditional medicine.

유망 바이오에너지작물 "억새" 개발 (Development of "Miscanthus" the Promising Bioenergy Crop)

  • 문윤호;구본철;최용환;안승현;박선태;차영록;안기홍;김중곤;서세정
    • 한국잡초학회지
    • /
    • 제30권4호
    • /
    • pp.330-339
    • /
    • 2010
  • 억새의 식물학적인 분류 및 형태, 선진국의 억새 육종, 재배 및 이용 현황 그리고 우리나라의 억새 연구성과 등을 고찰함으로서 향후 우리나라 에너지 자급율 제고를 위한 억새 연구방향을 제시하고자 국내외 연구결과를 요약하면 다음과 같다. 억새속 식물에는 17개종이 존재하는데 이 중 바이오 에너지용으로 중요한 종은 한국 등 동아시아가 원산인 참억새(M. sinensis)와 물억새(M. sacchariflorus) 그리고 이들 두 종의 종간 교잡종인 3배체 억새(M. x giganteous) 등이다. 여러 가지 에너지작물 중 억새는 연간 바이오매스 수량이 많고 저온, 염해, 습해 등 열악 환경 적응성과 질소이용효율이 우수하며 에너지 산출/투입 수지가 가장 높고 지상부 줄기와 땅속줄기에 다량의 탄소를 저장하기 때문에 탄수수지가 가장 높다. 유럽, 미국 및 캐나다 에서는 1930년대부터 일본으로부터 3배체 억새를 도입하여 연료용 펠릿 생산, 열병합발전, 양액재배 배지, 건축자재 및 강화 플라스틱 원료로 이용한다. 현재 재배되는 3배체 억새 단점보완을 위한 품종육성연구와 사탕수수와 억새교잡종인 "Miscane" 육성 연구가 진행되고 있다. 우리나라에서는 2007년 억새 유전자원 수집이 착수된 이후 2009년에 바이오매스 수량이 많은 "거대억새1호"와 억새를 증식효율을 높일 수 있는 "억새대량증식방법"을 개발하였다. 향후 우리나라 억새산업 발전을 위해서는 분자육종 등 새로운 육종기법을 활용하여 우리나라뿐만 아니라 해외에서도 재배할 수 있는 우량 신품종을 육성하는 한편 바이오매스의 전처리, 당화 및 발효 등 셀룰로오스계 에탄올 생산공정에 관한 연구도 강화해야 할 것이다.

첨포를 이용한 좌주관상동맥 협착증의 치료 (The Clinical Experiences of Patch Angioplasty in Isolated Critical Left Main Coronary Artery Stenosis)

  • 윤치순;유경종;이교준;김대준;강면식
    • Journal of Chest Surgery
    • /
    • 제31권7호
    • /
    • pp.674-678
    • /
    • 1998
  • 좌주관상동맥 협착증은 관상동맥 협착증 환자의 약 7%에서 발생될 정도로 관상동맥 협착증 중에서는 드문 질환이며, 특히 좌주관상동맥 협착증이 독립적으로 나타나는 경우는 1% 미만으로 매우 드물다. 그러나 독립된 좌주관상동맥 협착증이 있는 경우에 보편적인 관상동맥 우회로조성술로는 완전한 재관류를 기대할 수 없다. 따라서 이를 극복하기 위해 좌주관상동맥 혈관성형술이 새로이 시도되고 있다. 연세대학교 심장혈관센터에서는 1994년 5월부터 1996년 2월까지 독립된 좌주관상동맥 협착증을 가진 11명에게 혈관성형술을 시행하여 얻은 결과를 평가하고자 한다. 대상환자의 연령은 34세에서 62세 사이로 평균 44.1 $\pm$ 9.3세였다. 이중 남자가 3명, 여자가 8명 (73%)으로 대부분이 여자였다. 수술전 관상동맥 협착증의 위험요소는 당뇨가 1례, 고혈압이 3례, 흡연이 2례, 과체중이 3례 및 가족력이 1례 있었다. 평균 콜레스테롤 치는 196.5 $\pm$ 33.6 mg/dL였으며, 이중 4례에서 200 mg/dL가 넘었다. 수술전 흉통의 정도는 Class II가 6명, Class III가 5명이었으며, 심전도상에서 T inversion이나, ST elevation이 있으면서 심초음파검사에서 좌심실 운동장애를 보인 예가 4례 있었으나 심근경색증을 보인 예는 없었다. 수술전 좌심실 박출계수는 61.1 $\pm$ 5.9%였다. 수술후 좌심실 박출계수는 65.2 $\pm$ 9.1이었고, 좌심실 운동장애를 보인 예는 없었다. 진단은 좌주관상동맥 입구의 협착증이 8명, 근위부 협착이 3명이었으며, 협착정도는 전례에서 60% 이상이었고 이중 5례는 80% 이상이었다. 수술시 접근방법은 모든 예에서 좌주관상동맥의 전방접근을 시도하였으며, 혈관성형술에 사용한 첨포는 소심낭 (bovine pericardium) 을 사용하였다. 동반수술은 전례에서 좌전하행지에 우회로조성술을 시행하였다 (10례 : 좌내유동맥, 1례 : 대복재정맥). 수술시 측정한 협착부위의 직경은 1례가 1 mm, 나머지 10례는 2 mm였으며, 혈관성형술 후에 측정한 직경은 9례가 4 mm, 2례가 5 mm 였다. 수술후 합병증은 하지의 창상감염이 1례 있었으며, 수술사망은 없었다. 추적조사는 100%가 가능하였으며, 추적조사 기간은 평균 15.5$\pm$5.8 개월이었다. 이 기간 중 흉통이 발생한 예는 없었으며, 심전도상 이상소견을 보인 예도 없었다. 수술후 평균 14.4$\pm$3.3 개월에 관상동맥 조영술을 5례에서 시행하였으며, 5례 모두 좌주관상동맥 혈관성형술 부위는 광범위한 개통이 있었으나, 좌전하행지에 이식한 이식편 중 2례에서 중등도의 협착이 있었으며, 나머지 3례도 혈류량이 상당히 줄어든 소견을 보였다. 이상과 같은 결과로 미루어 독립된 좌주관상동맥 협착증이 있는 경우에 비적응증이 되지 않는다면 혈관성형술이 완전한 재관류를 위하여 이상적인 방법으로 생각되며, 단지 좌전하행지에 시행하는 우회로술은 의미가 없을 것으로 생각된다.

  • PDF

올리브유가 첨가된 프레스햄의 저장 중 품질특성에 미치는 영향 (Effects of Olive Oil Additives on the Quality Characteristics of Press Ham during Cold Storage)

  • 이정일;정재두;이진우;하영주;신택순;곽석준;도창희
    • 한국축산식품학회지
    • /
    • 제27권2호
    • /
    • pp.163-170
    • /
    • 2007
  • 본 연구는 프레스햄의 품질특성에 올리브유 미치는 영향을 조사하고자 하였다. 시험구는 프레스햄에 첨가되는 올리브유의 양에 따라 5개의 시험구를 배치하였다. 대조구는 올리브유를 첨가하지 않고 총 구성분 중 10% 량만큼 등지방을 첨가하였다. 처리구 1은 프레스햄 제조시 첨가되는 돈지방 함량 중 5%를 올리브유로 대체시켰으며, 처리구 2는 10%,처리구 3은 15%,처리구 4는 20%를 올리브유로 대체하여 제조하였다. 제조된 프레스햄은 진공 포장하여 냉장온도($4^{\circ}C$)에서 28일간 저장하면서 실험에 공시하였다. 조단백질과 조지방 함량은 대조구와 올리브유 처리구간에 유의적인 차이가 없었으며, 함유수분과 조회분 함량은 대조구가 올리브유 처리구에 비하여 유의적으로 높은 함량을 보였다(p<0.05). pH는 처리구간의 비교에서 전 저장기간 동안 뚜렷한 경향이 없는 것으로 나타났으며, 저장기간 경과에 따른 변화에서는 전 처리구가 저장 7일째에 가장 높았다가 7일 이후에는 감소하는 경향을 보였다. 육색 변화에서 대조구에 비하여 올리브유 대체 수준이 증가할수록 황색도 값은 증가하고 반면에 적색도 값은 감소하는 경향을 보였다. 저장기간의 경과에 따른 변화에서도 뚜렷한 변화가 없었다. 조직감의 변화에서 대조구와 올리브유 처리구간의 비교에서 유의적인 차이는 인정되었지만 뚜렷한 경향이 없었으며, 저장기간의 경과에 따른 변화에서도 뚜렷한 변화가 없었다. 이상의 결과 프레스햄 제조시 올리브유의 첨가는 이화학적 특성 및 조직감에 영향을 미치지 않으며, 단가불포화지방산 함량을 강화시킨 건강지향적 고급 육제품 생산이 가능하다고 사료된다.

Stellite bearings for liquid Zn-/Al-Systems with advanced chemical and physical properties by Mechanical Alloying and Standard-PM-Route

  • Zoz, H.;Benz, H.U.;Huettebraeucker, K.;Furken, L.;Ren, H.;Reichardt, R.
    • 한국분말야금학회:학술대회논문집
    • /
    • 한국분말야금학회 2000년도 춘계학술강연 및 발표대회 강연 및 발표논문 초록집
    • /
    • pp.9-10
    • /
    • 2000
  • An important business-field of world-wide steel-industry is the coating of thin metal-sheets with zinc, zinc-aluminum and aluminum based materials. These products mostly go into automotive industry. in particular for the car-body. into building and construction industry as well as household appliances. Due to mass-production, the processing is done in large continuously operating plants where the mostly cold-rolled metal-strip as the substrate is handled in coils up to 40 tons unwind before and rolled up again after passing the processing plant which includes cleaning, annealing, hot-dip galvanizing / aluminizing and chemical treatment. In the liquid Zn, Zn-AI, AI-Zn and AI-Si bathes a combined action of corrosion and wear under high temperature and high stress onto the transfer components (rolls) accounts for major economic losses. Most critical here are the bearing systems of these rolls operating in the liquid system. Rolls in liquid system can not be avoided as they are needed to transfer the steel-strip into and out of the crucible. Since several years, ceramic roller bearings are tested here [1.2], however, in particular due to uncontrollable Slag-impurities within the hot bath [3], slide bearings are still expected to be of a higher potential [4]. The today's state of the art is the application of slide bearings based on Stellite\ulcorneragainst Stellite which is in general a 50-60 wt% Co-matrix with incorporated Cr- and W-carbides and other composites. Indeed Stellite is used as the bearing-material as of it's chemical properties (does not go into solution), the physical properties in particular with poor lubricating properties are not satisfying at all. To increase the Sliding behavior in the bearing system, about 0.15-0.2 wt% of lead has been added into the hot-bath in the past. Due to environmental regulations. this had to be reduced dramatically_ This together with the heavily increasing production rates expressed by increased velocity of the substrate-steel-band up to 200 m/min and increased tractate power up to 10 tons in modern plants. leads to life times of the bearings of a few up to several days only. To improve this situation. the Mechanical Alloying (MA) TeChnique [5.6.7.8] is used to prOduce advanced Stellite-based bearing materials. A lubricating phase is introduced into Stellite-powder-material by MA, the composite-powder-particles are coated by High Energy Milling (HEM) in order to produce bearing-bushes of approximately 12 kg by Sintering, Liquid Phase Sintering (LPS) and Hot Isostatic Pressing (HIP). The chemical and physical behavior of samples as well as the bearing systems in the hot galvanizing / aluminizing plant are discussed. DependenCies like lubricant material and composite, LPS-binder and composite, particle shape and PM-route with respect to achievable density. (temperature--) shock-reSistibility and corrosive-wear behavior will be described. The materials are characterized by particle size analysis (laser diffraction), scanning electron microscopy and X-ray diffraction. corrosive-wear behavior is determined using a special cylinder-in-bush apparatus (CIBA) as well as field-test in real production condition. Part I of this work describes the initial testing phase where different sample materials are produced, characterized, consolidated and tested in the CIBA under a common AI-Zn-system. The results are discussed and the material-system for the large components to be produced for the field test in real production condition is decided. Outlook: Part II of this work will describe the field test in a hot-dip-galvanizing/aluminizing plant of the mechanically alloyed bearing bushes under aluminum-rich liquid metal. Alter testing, the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed. Part III of this project will describe a second initial testing phase where the won results of part 1+11 will be transferred to the AI-Si system. Part IV of this project will describe the field test in a hot-dip-aluminizing plant of the mechanically alloyed bearing bushes under aluminum liquid metal. After testing. the bushes will be characterized and obtained results with respect to wear. expected lifetime, surface roughness and infiltration will be discussed.

  • PDF

Chlorella vulgaris CHK0008 시비가 유기농 딸기와 엽채소의 저장성과 신선도 향상에 미치는 영향 (Effect of Chlorella vulgaris CHK0008 Fertilization on Enhancement of Storage and Freshness in Organic Strawberry and Leaf Vegetables)

  • 김민정;심창기;김용기;박종호;홍성준;지형진;한은정;윤종철
    • 원예과학기술지
    • /
    • 제32권6호
    • /
    • pp.872-878
    • /
    • 2014
  • 이 연구는 생물비료로서 클로렐라(Chlorella vulgaris) 분무처리에 의한 유기농 딸기와 엽채류의 신선도와 저장성 향상을 목표로 하였다. 클로렐라 균주 CHK0008은 유기농 벼재배 논의 담수에서 분리하였으며 형태적 특징과 18S rDNA와 23S rDNA 염기서열 비교에 의해 C. vulgaris로 동정하였다. 실험에 사용한 C. vulgaris CHK0008 균주는 BG11 변형배지(BGMM)에서 잘 배양되었으며 UV/VIS 분광광도계로 680nm에서 흡광도를 측정하였을 때 1 OD의 C. vulgaris CHK0008는 $2.15{\times}10^6cell/mL$ 농도로 개산하였다. 클로렐라(C. vulgaris)의 엽면처리구와 무처리구를 비교하였을 때 '설향'과 '육보' 딸기 품종의 당도가 각각 22.2%, 11.5% 향상되었다. 또한 엽면처리구의 '설향'과 '육보' 딸기 품종의 부패율은 무처리구에 비해 각각 63.8%와 74.4% 감소하였다. 엽채류인 상추, 케일, 붉은 케일, 흰 케일, 비트의 엽색 변화 및 백화현상이 저온저장 10일 후 물만 분무 처리한 무처리에서 관찰되었다. 그러나 25% C. vulgaris 배양액을 엽면 처리한 엽채류를 $4^{\circ}C$에서 저장하는 동안 부패율이 무처리에 비해 현저히 감소하였다.

냉동과 해동처리가 계육 가슴살의 natural microflora, 접종된 Listeria monocytogenes와 Campylobacter jejuni에 미치는 영향 (Effects of Freezing and Thawing Treatments on Natural Microflora, Inoculated Listeria monocytogenes and Campylobacter jejuni on Chicken Breast)

  • 최은지;정영배;김진세;천호현
    • 한국식품위생안전성학회지
    • /
    • 제31권1호
    • /
    • pp.42-50
    • /
    • 2016
  • 본 연구는 다양한 냉동과 해동처리에 따른 계육 가슴살에 natural microflora, 접종된 L. monocytogenes와 C. jejuni 수와 미세구조 변화 구명을 위하여 연구를 수행하였다. $-20^{\circ}C$ 송풍식 냉동처리구의 총 호기성 세균과 C. jejuni 수는 4.06 log CFU/g과 4.09 log CFU/g으로 대조구와 비교하여 각각 약 0.7 log CFU/g과 1.0 log CFU/g의 감소를 보였다. 한편, 계육 가슴살 접종된 L. monocytogenes 수는 냉동방법과 냉동온도에 따라 유의적인 차이를 보이지 않았다. $4^{\circ}C$$25^{\circ}C$ 송풍식 해동처리구의 총 호기성 세균수는 3.70 log CFU/g과 4.02 log CFU/g으로 측정되어 대조구와 비교하여 각각 0.72 log CFU/g과 0.40 log CFU/g 감소한 반면 $25^{\circ}C$ 유수식 해동처리구의 총 호기성 세균 수는 해동과정에서 균수가 급격히 증가하여 5.78 log CFU/g으로 관찰되었다. 해동 중 C. jejuni 수 변화는 해동방법보다 해동온도에 영향을 받는 것으로 나타났다. 냉동-해동 반복 5회 후 총 호기성 세균과 효모 및 곰팡이 수는 감소하여 각각 4.15 log CFU/g과 2.30 log CFU/g을 보였다. 계육 가슴살에 접종된 L. monocytogenes 수는 냉동-해동 반복처리에 유의적인 영향이 없었지만 C. jejuni 수는 냉동-해동 반복 횟수가 증가함에 따라 감소하는 경향을 보였다. 냉동-해동 반복이 증가함에 따라 근섬유 조직을 재 손상시켰으며 특히 냉동-해동 반복 5회 후에는 계육 가슴살 시료의 조직세포 외부뿐만 아니라 내부에서도 공간이 발생하였으며 불균일하게 찢어진 세포가 관찰되었다.

오이 검은별무늬병 방제에 효과적인 유기농업자재 선발 (Screening for Effective Organic Farming Materials for the Control of Cucumber Scab Caused by Cladosporium cucumerinum)

  • 박소향;홍성준;심창기;김민정;박종호;한은정;김용기
    • 식물병연구
    • /
    • 제23권2호
    • /
    • pp.159-167
    • /
    • 2017
  • 본 연구는 Cladosporium cucumerinum PT1 (KACC 48094)에 의해 발생하는 오이 검은별무늬병에 대하여 유기농업자재의 방제효과를 평가하기 위해 수행되었다. 43품목의 유기농업 자재를 대상으로 실내에서 항균활성 검정과 온실에서 오이 유묘에 포자현탁액 접종을 통한 유묘검정을 실시하였다. 13개 품목의 유기농업자재가 균사생장을 억제하였고, 이 중 9개 품목이 미생물 제제였다. 오이 유묘를 이용한 검정에서 6품목의 유기농업자재가 90% 이상의 우수한 방제효과를 나타냈다. 그 중에서 Bacillus amyloliquefaciens M27이 유효성분인 미생물 제제의 억제효과가 가장 뛰어났다. 그 다음으로 9개의 유기농업자재를 선발하여 예방적 및 치료적 효과를 알아보기 위해 적용하였는데, 예방적으로 처리했을 때 9개 자재 모두 병 발생을 상당히 억제하였다. 특히, 보르도액 I과 III은 방제가가 각각 96.7%, 73.3%로 훌륭한 예방효과를 나타냈다. 이 중 백리향+고삼 추출물이 함유된 자재에서만 방제가 가 50%로 다소 낮았지만 치료적 처리의 효과가 나타났다. 이 연구를 통해 시설 내 온화하고 습한 조건에서 잘 발생하는 오이 검은별무늬병은 유기농업자재로 방제될 수 있고 예방적 처리가 더욱 중요하고 효과적임이 확인되었다.

내습성 고추 품종 육성을 위한 선발계통의 유전적 특성 구명 (Study on the Genetic Characteristics of Waterlogging Tolerant Pepper (Capsicum annuum L.) for Breeding Tolerant Varieties against Flooding Stress)

  • 양은영;채수영;홍종필;이혜은;박은준;문지혜;박태성;노미영;김옥례;김상규;김대영;이선이;조명철
    • 생명과학회지
    • /
    • 제27권10호
    • /
    • pp.1111-1120
    • /
    • 2017
  • 내습성 및 감수성 선발계통 각 1점씩을 대상으로 침수처리 후 GO 분석을 통해 추출된 유전자들을 기능별로 분류해보면 생물학적 과정(biological process)에 관여하는 유전자 발현이 가장 크게 영향을 받았으며, 분자 기능(molecular function)과 세포 요소(cellular component) 관련 유전자를 포함하여 모든 기능의 유전자 발현 변화가 감수성 계통보다 내습성 계통에서 크게 일어났다. 침수처리 후 발현 양상이 유의하게 차이나는 유전자의 보다 자세한 기능을 측정한 결과 내습성 계통에서 발현량이 증가한 유전자는 CA02g26670은 CONSTANS protein과 관련있는 유전자로 일장조건에 따른 개화조절에 관여하는 유전자이며, 발현량이 감소한 유전자는 CA01g21450, CA01g22480, CA01g34470, CA02g00370, CA02g00380이었다. 감수성 계통에서 침수처리 후 발현량이 증가한 유전자는 CA02g09720, CA02g21290, CA03g16520, CA07g02110, CA12g17910이었는데 각각 단백질 분해효소 활성 저해, DNA binding, 세포벽 분해효소 억제, nodulin 관련 유전자 등으로 밝혀진 유전자들이었다. 감수성 계통에서 발현량이 감소한 유전자는 CA02g02820, CA03g21390, CA06g17700, CA07g18230로 각각 칼슘이온결합, 고온환경 발현기작, 레시틴 생합성 경로의 수용성중간대사체인 phosphocholine 합성 및 저온스트레스 관련 등의 기능을 한다. 내습성 계통과 감수성 계통에서 동시에 발현이 증가한 유전자는 고온 등 환경스트레스로 인한 apoptosis와 관련된 유전자와 peroxidase와 관련있는 유전자로 확인되었고, 발현이 동시에 감소한 유전자는 nucleoside transporter인 CA02g16990로 확인되었으며, 나머지 선발 유전자는 유전자 발현이 확인되지 않았다. 내습성 및 감수성 계통간 습해 조건에서 발현에 차이를 보이는 유전자 구명을 기반으로 향후 불량환경에 대해 저항성을 보이는 계통 육성 및 관련 생리반응에 대한 다양한 연구가 필요하다.