• The Journal of Korean Obstetrics and Gynecology
• /
• v.19 no.4
• /
• pp.93-116
• /
• 2006

Purpose : This study is to examine the effects of Hwaganjeon water extract(HGJ) on immobilization-stress or cold-stress in BALB/C mice. Methods : We have Hwaganjeon water extract(HGJ) by freeze-dryer & melt it by a saline solution. We feed HGJ 500mg/Kg to 5mice, and add immobilization-stress by putting mice in plastic cylinder 10 hours, and add cold-stress by putting mice in $4^{\circ}C$ cold room 6 hours. Results : 1. HGJ decreased the serum level of histamine and corticosterone increased by immobilization-stress or cold-stress. HGJ inhibited the release of histamine from mast cells at the concentration of 1 mg/ml. 2. HGJ did not affect the cell viability of thymocytes decreased by immobilization-stress or cold-stress, but increased the cell viability of splenocytes decreased by immobilization-stress or cold-stress. 3. HGJ decreased the population of splenic $CD4^{+}$ and $CD8^{+}$cells increased by immobolization-stress or cold-stress. 4. HGJ enhanced the production of ${\gamma}$-interferon(IFN) and interleukin(IL)-2 decreased by immobilization-stress or cold-stress. Conclusion : These results indicate that HGJ may be useful for the prevention and treatment of stress via suppression of serum histamine and corticosterone level and enhancement of immune response.

• Journal of Acupuncture Research
• /
• v.20 no.3
• /
• pp.177-193
• /
• 2003

Objective : The present studies investigated the effects of 120Hz high frequency electroacupunctue(EA) on the stress-induced stomach dysfunction in relation to its effect on the level of stress hormone and gastric mucosal damages. The gastric mucosal injury was induced by cold-restraint stress and two acupoints corresponding to Zusanli and Sanyinjiao in man were used. Methods: Cold-restraint stress produced typical gastric lesions in all rats of the stressed groups, but he number of ulcers as well as the mean ulcer diameter were reduced by 120 Hz EA pre-treatment. The cold-restraint stress also induced an increase in catecholamine response involving epinephrine, norepinephrine and dopamine, but an slight decline were observed in EA pre-treated rats compared with cold-restrained rats. Results: The degranulation value of gastric mast cell was significantly higher in cold-restrained rats than in control ones. However, with the significant reduction of degranulation values of gastric mast cells in EA pre-treated rats compared with cold-restrained ones, $PGE_2$ content in the gastric mucosa of EA pre-treated rats was also different from that observed in cold-restrained rats. Cold-restraint stress induced an elevated mRNA expression of pro-inflammatory gene such as cyclooxygenases-2 and tumor necrosis factor(TNF)-${\alpha}$, but these expression were down-regulated in EA pre-treated rats. Immunohistochemecal analysis showed that while the inhibitory-${\kappa}B{\alpha}$ an TNF-${\alpha}$ immunoreaction in the surface epithelium of the stomach tended to increase, both reactions in the EA pre-treated rats showed similar pattern as observed in controls. Conclusions : These results suggest that 120 Hz EA may act as a therapeutical means for gastric mucosal damages through a activation of pituitary adrenal system. it could be concluded that 120 hz high frequency electroacupuncture affords a good protective potential against stress-induce gastrointestinal dysfunction.

• Journal of Korean Society of Forest Science
• /
• v.108 no.4
• /
• pp.484-492
• /
• 2019

The aim of the present study was to compare the cold tolerance of seven different types of trees growing in southern Korea to select evergreen broad-leaved trees that can be used as street trees in large land areas experiencing climate change. The trees compared were the thorn tree, Cinnamomum camphora, Camellia japonica, Machilus thunbergii, Dendropanax morbifera, Daphniphyllum macropodum Miq., Quercus glauca Thunb., and Raphiolepis indica. When the trees were subjected to low temperature treatment, their electrolyte elution volume values appeared to increase with the decreases in the treatment temperature. The analysis of the cold tolerance of each type of tree was based on the estimated temperatures in the following order: C. japonica (-11.586℃) > R. indica (-9.348℃) > Q. glauca (-8.719℃) > M. thunbergii (-8.090℃) > D. macropodum (-7.409℃) > D. morbifera (-7.085℃) > C. camphora (-6.995℃). The relative cold tolerance difference found in the seven tree species was more than 5℃, as evaluated previously. In the Lauraceae family, the difference in cold tolerance was more than 2℃, even in the same species. The analysis showed that trees with excellent cold tolerance included Q. glauca Thunb., C. japonica, R. indica, and the thorn tree. This knowledge is required for the evaluation of the possibility of the survival of trees under cold temperature conditions in cities.

• Journal of Plant Biotechnology
• /
• v.42 no.1
• /
• pp.43-48
• /
• 2015

It is a serious situation that the farmers' income has gradually decreased due to the decline of productivity of fruit trees infected with viroids. It has been known that Persimmon viroid (PVd) and Citrus viroid (CVd) are economically important viroids that can infected persimmon. In this study, the incidence of CVd and PVd in 'Fuyu' persimmon were identified as 41% and 34% in JeollaNam-do, respectively. The collected persimmon samples infected by both PVd and CVd were used for testing efficiency of the viroid inactivation methods. The samples were subjected to single treatment of the heat treatment ($37^{\circ}C$), cold treatment ($4^{\circ}C$), or antiviral agent treatment (Ribavirin), and double treatment of combinations of the three methods. Viroid inactivation efficiency was confirmed through RT-PCR. In the case of the samples subjected to cold treatment for 4 weeks, the viroid inactivation efficiency was most significantly high as 67% against the survival rate of 100%. In addition, in the case of the samples treated for 2 weeks with the antiviral agents and cold treatment, the viroid inactivation rate was similar to that of the cold treatment. In conclusion, the cold treatment showed the highest viroid inactivation efficiency, and this result will provide valuable information for production of viroid-free persimmon.

• Transactions of Materials Processing
• /
• v.15 no.8 s.89
• /
• pp.562-567
• /
• 2006

Micro-alloyed steel or heat-treatment-free used in clean technology have been replacing for conventional quenched-and-tempered structural steels since the micro-alloyed forging steel was developed in early 1970s in Germany for saving money of heat treatment, simplified process, short delivery and good productivity. In this paper, ball stud assembled in steering system for automobile was selected to compare conventional process making heat treatment with new process using high strength micro-alloyed steel without heat treatment. The conventional process for ball stud was composed of a total of 6 steps including upsetting, forward extrusion, machining, burnishing and tread rolling with heat treatment and shot blasting. As opposed to conventional process, newly proposed process for ball stud using the clean technology without heat treatment is simplified such as forward extrusion, heading, upsetting, forming having a flange shape and tread rolling. Also net shape forming process to achieve specified process not to include machined step fur manufacturing the ball stud was applied to newly simplified process since micro-alloyed steel is difficult to be formed.

• Journal of Oriental Medical Thermology
• /
• v.9 no.1
• /
• pp.1-7
• /
• 2011

Purpose : This study was performed to evaluate the efficacy of herb medicine on climacteric woman with numbness of lower limbs by using Digital Infrared Thermographic Imaging(DITI). Methods : The patient was 56-year-old female who was suffering from numbness, cold hypersensitivity of lower limbs and hot flush. We treated her using herb medicine, acupuncture and moxibustion. The progress of symptoms were evaluated by DITI, and then we compared DITI before treatment and after treatment. Results : After treatment, visual analog scale of numbness and cold hypersensitivity of lower limbs were decreased and frequency of hot flush was also decreased. The temperature of forehead got lower than that before treatment and the temperature of LR3 and ST32 got higher than those before treatment on DITI. Conclusion : This result suggest that DITI can be used for assessment after treatment on climacteric symptoms with numbness of lower limbs.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.482-490
• /
• 2023

The purpose of this study was to analyze microstructural changes and evaluate the mechanical properties of TWIP steel subjected to variations in heat treatment, in order to identify optimal process conditions for enhancing the performance of TWIP steel. For this purpose, a homogenization heat treatment was conducted at 1,200 ℃ for 2 h, followed by hot rolling at temperature exceeding 1,100 ℃ and cold rolling. Annealing heat treatment is achieved using a muffle furnace in the range of 600 ℃ to 1,000 ℃. The microstructure characterization was performed with an optical microscope and X-ray diffraction. Mechanical properties are evaluated using micro Vickers hardness, tensile test, and ECO index (UTS × Elongation). The specimens annealed at 900 ℃ and 1,000 ℃ experienced a significant decrease in hardness and strength due to decarburization. Consequently, the decarburization phenomenon is closely related to the heat treatment process and mechanical properties of TWIP steel, and the effect of the microstructure change during annealing heat treatment.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.24 no.4
• /
• pp.62-70
• /
• 2011

Objectives: The purpose of this study is to investigate the relationship between cold hypersensitivity and common health indexes including dyspepsia, headache, defecation, leucorrhea, and menstruation in young women. Methods: 40 outpatients who visited Kangnam Kyung-Hee Oriental Hospital from January, 2010 to November, 2011 were analyzed. The experimental group consisted of 20 patients diagnosed with cold hypersensitivity, while the control group consisted of 20 patients who were not. All patients were subjected to Digital Infrared Thermal Imaging(DITI), and those with thermal difference greater than $2^{\circ}C$ between anterior thigh and top of feet were diagnosed with cold hypersensitivity. The subjective characteristics of dyspepsia, headache, defecation, leucorrhea, and menstruation were obtained through inquiry by residents at the hospital. The relationship between cold hypersensitivity, dyspepsia, headache, defecation, leucorrhea, and menstruation was analyzed with Independent T-test using SPSS for Windows (version 17.0). Results: Means of defecation, leucorrhea, dysmenorrhea in cold hypersensitivity group were higher than control group without significant statistical difference. Dyspepsia appeared statistically higher in experimental group with significance while headache was the same in both groups. Means of menstrual cycle and menstrual coagulation were higher in non-cold hypersensitivity group, but there was no statistical difference. Conclusions: Results suggest that dyspepsia is common in cold hypersensitivity and treatment of cold hypersensitivity may relieve accompanying digestive problems.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.42-47
• /
• 2007

The characteristics of the tool system give many effects into the costs and qualities for the finished components. Therefore, a tool life is one of the important issues on cold forging industry. However, since variables related with tool life are many complicated, the studies for solution should be investigated by the systematic research approach. The shape and process changes of die, the hardness changes of material and the tolerance of dies to decrease the die stress are analyzed by the FEM software. The heat-treatment of tool material is investigated to improve the tool life. Deep cryogenic treatment of tool steel is very efficient to improve the wear resistance due to the fine carbide. And, it is investigated that the shape and dimension of tool give effect into both tool life and quality of forged product..

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.140-143
• /
• 2003

The drawbead is an important part in sheet metal forming for automotive part and its effect is affected by various process parameters. Therefore in this study, drawbead friction test was performed at various process parameters - panels (cold rolled and galvanized sheet steel), lubricants (having three different viscosities), bead materials(steel, iron) and surface treatment of bead (Cr plating). Circular shape bead has been used for the test. The results show that friction and drawing characteristics were mainly influenced by the nature of zinc coating, viscosity of lubricants, surface treatment of a bead and hardness of coated layer.