• Korean Journal of Environmental Agriculture
• /
• v.36 no.2
• /
• pp.106-112
• /
• 2017

BACKGROUND: Kale (Brassica oleracea) biosynthesizes various phytochemicals including glucosinolates, flavonoids, and carotenoids. Phytochemicals of plants are influenced by light, temperature, carbon dioxide, and growing conditions. Specifically, carotenoids are affected by temperature, light, and oxygen. The aim of this study was to investigate the effect of cold stress (day/night: $25^{\circ}C/20^{\circ}C$, $20^{\circ}C/15^{\circ}C$, $15^{\circ}C/10^{\circ}C$) on carotenoids in kale leaves. METHODS AND RESULTS: Kale was grown in pots for up to 50 days after sowing (DAS) in a greenhouse. For cold acclimation experiments, kale grown in growth chambers for 3 days and was subjected to low temperature for 4 days. The conditions maintained in the growth chambers were as follows: photoperiod, 12/12 h (day/night); light, fluorescent; and relative humidity, 60%. Carotenoid (lutein, ${\alpha}-carotene$, zeaxanthin, ${\beta}-carotene$) contents were analyzed by high-performance liquid chromatography (HPLC). The total carotenoid content gradually increased during cold acclimation for 3 days. When kale was subjected to cold stress, the total carotenoid content was high at $25^{\circ}C/20^{\circ}C$ treatment, but low at $15^{\circ}C/10^{\circ}C$ treatment. The total carotenoid content of kale leaves continuously grown in greenhouse decreased from 50 to 57 DAS (1,418 and 1,160 mgkg-1 dry wt., respectively). The lutein, ${\alpha}-carotene$, and ${\beta}-carotene$ contents were very low and the zeaxanthin contents were very high at $15^{\circ}C/10^{\circ}C$ treatment. When kale was subjected to cold stress, the ratio of individual to the total carotenoid contents of kale leaves was 4553% for -carotene and 210% for zeaxanthin. CONCLUSION: The ${\beta}-carotene$ and zeaxanthin contents in kale leaves indicate their sensitiveness toward cold stress.

• Journal of Biosystems Engineering
• /
• v.30 no.3 s.110
• /
• pp.155-160
• /
• 2005

The objective of this research was to establish a domestically available cooling storage technique by cold-air in winter, using winter cool air ventilation fur determining rough rice cooling method in the storage and dry bin. The rough rice storage characteristics of two test conditions, winter cool-air ventilation storage and ambient temperature storage, were evaluated from January to July 2001, using a storage and dry bin of 300-ton capacity. Results of this research are as follows: Grain temperature was from $-5.1\~-8.5^{\circ}C$ after winter cool-air ventilation, and grain initial temperature for ambient temperature bin storage was $0.3\~1.9^{\circ}C$. Moisture content of rough rice decreased from $0.28\;to\;0.93\%$ and from $1.53\;to\;1.92\%$ to compare with original moisture contents for winter cool-air ventilation, and for ambient temperature bin storage, respectively. Broken ratio of brown rice from winter cool-air ventilation bin increased from $0.16\;to\; 0.92\%$, and brown rice broken ratio was from $2.24\;to\;2.86\%$ for ambient temperature bin storage to compare with initial broken ratio. Hardness of stored rice increased along storage period increase in alt storage methods, and cooling bin storage increased rice hardness of 0.271kgf: this increasing was lower then the other methods from 0.059 to 2.239kgf. Germination rates were decreased approximately 9.03, 3.14 and $3.20\%$ for upper, middle, and bottom of ventilating winter air bin, respectively, and germination rates of 2.70, 3.47 and $4.14\%$ were approximately decreased for upper, middle, and bottom parts of ambient temperature bin storage, respectively.

• Korean Journal of Materials Research
• /
• v.14 no.10
• /
• pp.743-748
• /
• 2004

Modified Ni/YSZ cermets for high temperature electrolysis were synthesized by the direct ball milling of Ni and YSZ powder. The ball milling was carried out in dry process and in ethanol with varying milling time. While the dry-milling decreased the average size from 65 to $80{\mu}m$, the wet-milling decreased the average size down to $10{\mu}m$. In addition, very fine particles less than $0.1{\mu}m$ were observed in the wet-milling condition. The subsequent process of cold-pressing and sintering at $900^{\circ}C$ for 2 h did not affect the particle size of dry-milled powder. The electrical conductivity of the dry-milled Ni/YSZ cermet showed the value of $5{\times}10^{2}\;S/cm$ and this value was increased to $1.4{\times}10^{4}\;S/cm$ after the sintering at $900^{\circ}C$ for 2 h.

• Journal of Ocean Engineering and Technology
• /
• v.23 no.2
• /
• pp.92-97
• /
• 2009

In order to export aircraft components or substructures, it is necessary to get a certification from the main company for the components or an airworthiness certification from the FAA. In Korea, those processes are performed by a small number of private companies for aircraft components. However, airworthiness certification has never been done in the company. To export an assembled aircraft, whether small or large, it is obligatory to get a certification for the aircraft being exported. Currently, the Korean government is trying to get BASA agreement in a few years. For a mid-size company, it is easier to get the NADCAP audit process for the supply of aircraft components to the main company. In this paper, the overall process of aircraft certification is discussed and airworthiness certification is treated for export aircraft. Moreover, the NADCAP audit process is described in detail by introducing example parts made of composite material. This detailed process would be very helpful to a small or mid-size company that wants to develop and deliver aircraft components to foreign companies.

• Korean Journal of Plant Resources
• /
• v.11 no.2
• /
• pp.136-141
• /
• 1998

To give some information on the harvest and storage of Chinese yam (Dioscorea opposita), the experiment was done to examine the effect of its harvesting date and storage method on tuber weight, tuberrelated characters during the storageor at the end of storage. The yam tubers harvested 4 times at 20 days interval from Oct. 15 were stored with different storage methods(pit, room and cold temperature) and on Mar.15. all the characters were measured. Fresh weight of the tuber harvestedafter Nov. 5 and stored were greater than that done on Oct. 15 while dry tuber weight did not have any difference between the harvesting dates. The fresh weigth done directly from the field on Mar. 15 was higher compared to the other harvesting dates owing to its higher moisture content. The rate of sound tuber stored at room or cold temperature condition was higher than that at the field at which the rate was greater at the harvest after late nov. compared to the earlier harvests. Although the two storages were similar at sound tuber rates and marketable yield, the tuber weight was more reduced when stored at room temperature than when done at cold temperature . Brightness and value 'b' of chromaticaity realted to the tuber coloring and sugar content were higher but moisture content was lowerwhen harvested on Oct. 15 than the other havesting dates. All the characteristics realted to the marketability after storage were nearly same when stored at room and cold temperature. Value 'a' of chromaticity and sugar content were higher when harvest on Mar. 15 than when harvested before Dec. 15 but the 'b' value and mositure content were reverse results.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.15 no.1
• /
• pp.34-45
• /
• 2007

In order to reduce the compression power and to use the overall energy contained in LNG effectively, a combined cycle is devised and simulated. The combined cycle is composed of two cycles; one is an open cycle of liquid/solid carbon dioxide production cycle utilizing LNG cold energy in $CO_2$ condenser and the other is a closed cycle gas turbine which supplies power to the $CO_2$ cycle, utilizes LNG cold energy for lowering the compressor inlet temperature, and uses the heating value of LNG at the burner. The power consumed for the $CO_2$ cycle is investigated in terms of a solid $CO_2$ production ratio. The present study shows that much reduction in both $CO_2$ compression power (only 35% of the power used in conventional dry ice production cycle) and $CO_2$ condenser pressure could be achieved by utilizing LNG cold energy and that high cycle efficiency (55.3% at maximum power condition) in the gas turbine could be accomplished with the adoption of compressor inlet cooling and regenerator. Exergy analysis shows that irreversibility in the combined cycle increases linearly as a solid $CO_2$ production ratio increases and most of the irreversibility occurs in the condenser and the heat exchanger for compressor inlet cooling. Hence, incoming LNG cold energy to the above components should be used more effectively.

• Journal of Sericultural and Entomological Science
• /
• no.11
• /
• pp.63-68
• /
• 1970

The induction of polyhedroses in the silkworm, Bambyx mari L., was investigated treating the 5th instar larvae just after eodysis with high temperature (hot water bath at 40$^{\circ}C$ for 5 minutes or dry heat shock at 40$^{\circ}C$ for 30 minutes) and low temperature (5$^{\circ}C$ for 24 hours). The results obtained were as follows; 1. Comparing between the frequency of nuclear and cytoplasmic polyhedroses induced by cold and heat treatments (hot water bath at 40$^{\circ}C$ for 5 minutes), the induction ratio of the former is clearly less than that of the latter. But if the larvae tested with cold were left at room temperature (25$^{\circ}C$) for 30-120 minutes till the next hot water bath (40$^{\circ}C$) for 5 minutes and water bath (20$^{\circ}C$) for 5 minutes, treatments, the frequency of induced cytoplasmic polyhedrosis was more than that in the case of cold or hot water bath treatment alone. 2. The frequency of nuclear and cytoplasmic polyhedrosis induced by cold and successive heat (dry heat shock at 40$^{\circ}C$ for 30 minutes), left at room temperature (25$^{\circ}C$) ti11 the second treatment, the frequency of nuclear polyhedrosis was less than that of cytoplasmic polyhedrosis. 3. The reaction of nuclear polyhedra to stains also differs sharply from that of the cytoplasmic type. In a smear of nuclear polyhedra on a slide staining with Giemsa solution remains unstained against a stained back ground, in contrast to this, the cytoplasmic polyhedra take up stain readly.

• Horticultural Science & Technology
• /
• v.34 no.6
• /
• pp.807-817
• /
• 2016

Many onion growers and researchers assert that differences in soil type, agricultural practices, weather, and duration of prolonged onion cultivation in a particular field could affect onion bulb quality. This study evaluates the bulb quality of onions grown in different regions and determines the correlations between bulb characteristics and postharvest loss during cold and ambient storage. Soil and onion bulbs were collected from fields in six onion growing regions in Korea, during the growing season of 2011-2012. The fresh weight, dry matter content, and carbon (C), sulfur and magnesium contents of the onion bulbs were significantly affected by the location in which they were grown. Bulbs grown in Muan had the greatest number of scales, thinnest scale thickness, and the highest total soluble solids (TSS) and total flavonoids (TF). Bulbs originating from Jecheon had the lowest pyruvic acid (PA), total phenolics and TF. Storage loss of bulbs from the different regions was similar in refrigerated storage, but differed in ambient temperature storage. Bulb fresh weight was positively correlated with scale thickness (r = 0.617) and cold storage loss (CSL; r = 0.398). Dry matter content was positively correlated with C (r = 0.958) and TF (r = 0.256) contents, while it was negatively correlated with CSL (r = -0.424). CSL was primarily affected by the fresh weight, as well as the dry matter, C, and PA contents of the bulbs, while ambient storage loss was primarily influenced by the amount of TSS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.385-397
• /
• 1982

The climatic impacts have been the environmental constraints with soil characteristics to achieve self sufficiency of food production in Korea. In this paper, the distribution and appearance of impacts and the changes in climatological status due to recent trend of early transplanting of rice are widely discussed to derive some countermeasures against the impacts, being focussed on cultural A long term analysis of the climatic impact appearances of the last 74 years showed that drought, strong wind, flood, cold spell and frost were the major impacts. Before 1970's, the drought damage was the greatest among the climatic impacts; however, the expansion and improvement of irrigation and drainage system markedly decreased the damage of drought and heavy rain. The appearance of cold damage became more frequent than before due to introduction of early transplanting for more thermophilic new varieties. Tongillines which were from Indica and Japonica crosses throw more attention to cold damage for high yields to secure high temperature in heading and ripening stages and lead weakness to cold and drought damage in early growth stage after transplanting. The plants became subject to heavy rain in ripening stage also. For the countermeasures against cold damage, the rational distribution of adequate varieties according to the regional climatic conditions and planting schedule should be imposed on the cultivation. A detoured water way to increase water temperature might be suggestable in the early growth stage. Heavy application of phosphate to boost rooting and tillering also would be a nutritional control method. In the heading and ripening stages, foliar application of phosphate and additional fertilization of silicate might be considerable way of nutritional control. Since the amount of solar radiation and air temperature in dry years were high, healthy plants for high yield could be obtained; therefere, the expansion of irrigation system and development of subsurface water should be performed as one of the national development projects. To minimize the damage of strong wind and rainfall, the rational distribution of varieties with different growing periods in the area where the damage occurred habitualy should be considered with installation of wind breaks. Not only vertical windbreaks but also a horizontal wind break using a net might be a possible way to decrease the white heads in rice field by dry wind. Finally, to establish the integrated countermeasures against the climatic impacts, the detailed interpretation on the regional climatic conditions should be conducted to understand distribution and frequency of the impacts. The expansion of observation net work for agricultural meteorology and development of analysis techniques for meteorological data must be conducted in future together with the development of the new cultural techniques.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.224-231
• /
• 2009

The improvement of cold start capability is one of the most challenging tasks to be solved for commercialization of fuel cell vehicle. In this study, cold start test and ice blocking test(IBT) of fuel cell stack were carried out under various operating conditions. This fuel cell stack can be thawed from -20$^{\circ}$C within 25s and the voltage change was found to be comprised of 4 steps; the first step is the voltage decrease by overpotential, the second step is the voltage increase by the cell temperature increase, the third step is the voltage decrease by ice blocking, and the last step is the voltage increase by thawing. Bootstrap startup was failed after shutdown at temperature under 40$^{\circ}$C because of much condensed water in the fuel cell. Quantitative estimation of cold start capability have been demonstrated by ice blocking test(IBT). In the results, it was found that cold start capability was improved double every 10$^{\circ}$C from 30$^{\circ}$C to 65$^{\circ}$C and enhanced by 30% at the condition of SR 3/4 compared to SR 1.5/2.0 and enhanced by 20% with dry purge condition compared to with RH 50% purge condition.