• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.1
• /
• pp.26-30
• /
• 1993

To suggest a thermal diffusivity predicting equation for mixed meat products, heat penetration curves of pork products containing filefish meat were plotted in the temperature range of $80.44{\sim}121.03^{\circ}C$, and thermal diffusivities were calculated from the heat penetration curves. The ground pork was mixed with minced filefish meat and some additives such as lard, isolated soy protein, $1.5\%$ of table salt and $2\%$ of polyphosphate to control the composition and texture of products, and then stuffed into a model can. The heat penetration curves were plotted using a thermocouple fixed at the slowest heating point of the can. At constant heating temperature, the thermal diffusivities of the products increased linearly with increasing moisture content. The values of the products with constant moisture content also increased linearly with increasing heating temperature. The thermal diffusivities of the products with moisture content of $51.47{\sim}80.20\%$ could be predicted by following equation: $${\alpha}_p=(3.045+0.59{\cdot}X_w){\cdot}{\alpha}_w+0.0098{\cdot}10^{-6}{\cdot}X_w-0.4287{\cdot}10^{-6},(m^2{\cdot}s^{-1})$$ Maximal differences of the thermal diffusivities predicted with this equation were in the range of ${\pm}0.8\%$ compared with the practical values. This equation and another predicting equation obtained from the previous study for the pork product without fish meat could be simplified as following one equation, and the maximal differences of the thermal diffusivities predicted with this equation for both products with and without fish meat were in the range of less than ${\pm}2.5\%$ $${\alpha}_p=(2.290+0.54{\cdot}X_w){\cdot}{\alpha}_w+0.0024{\cdot}10^{-6}{\cdot}X_w-0.3535{\cdot}10^{-6},(m^2{\cdot}s^{-1})$$

• Journal of Sericultural and Entomological Science
• /
• v.51 no.2
• /
• pp.173-179
• /
• 2013

This study was investigation for primary bionomical characteristics, emergence rate of wintering type pupa and oviposition preference, of Papilio xuthus. The emergence rate of wintering type pupa stored at cold chamber($4{\pm}1^{\circ}C$) was 85%, after 10 months. The average emergence rate of wintering type pupa during storage was 89.6%, and the emergence periods were $7.9{\pm}1.9days$ in room temperature. Mating ratio in large oviposition room, $6,000{\times}6,000{\times}3,500$ mm($W{\times}L{\times}H$), was $86.7{\pm}5.8%$ higher than $63.3{\pm}15.3%$ in small room, $2,500{\times}3,000{\times}2,000$ mm($W{\times}L{\times}H$). But the number of eggs in the large room were $137.0{\pm}16.5$ fewer than $141.7{\pm}20.4$ in the small room. As a result of oviposition preference experiment on three different host plants, 10 mated female laid $141.7{\pm}27.8$ on the leaves of Phellodendron amurensew more than $67.7{\pm}20.6$ on Zanthoxylum schinifolium and $77.0{\pm}21.8$ on Citrus unshiu. The egg periods were $4.4{\pm}0.8$ days after oviposition, and the hatchability was 92.2% in $25^{\circ}C$ room condition. The larval period were $19.9{\pm}2.1$ days in the high temperature, long day condition($25^{\circ}C$, 14L : 10D). The headwidth of each developmental larval stage were $0.72{\pm}0.02$(1st), $1.19{\pm}0.02$(2nd), $1.65{\pm}0.05$(3rd), $2.43{\pm}0.07$(4th), $3.21{\pm}0.12$(5th). The pupal ratio was 91.6%. The pupal period were $8.8{\pm}0.9$ days, and the emergence rate was 92.2%.

• Journal of Food Hygiene and Safety
• /
• v.26 no.4
• /
• pp.296-301
• /
• 2011

This study was to evaluate the growth potential of E. coli O157:H7 in lettuce leaf extracts and on lettuce leaf surface at various temperatures. The pathogen can survive and multiply in the extracts and leaf surface of lettuce. The population of E. coli O157:H7 in the lettuce extracts reached to 4.79 log CFU/mL at $37^{\circ}C$. The multiplication of pathogen in lettuce extracts initiated within 10 hours of inoculation over $15^{\circ}C$ conditions. And it can survive in the lettuce leaf extracts at $4^{\circ}C$ for 100 hours at least. And this pathogen can multiply on lettuce leaf surface and the population of pathogen on the lettuce leaf surface increased to 1.82 log CFU/g at $25^{\circ}C$. At $37^{\circ}C$, the pathogen density increased to 1.53 CFU/g within 3 days after inoculation. At all temperature, irrespective of the inoculation level, similar trends in growth of E. coli O157:H7 were observed. These results emphasize the growth potential of E. coli O157:H7 in lettuce leaf extract and on lettuce leaf surface. To reduce the risk of outbreak, it is important to maintain the cold chain system during storage before the consumption.

• Korean Journal of Food Science and Technology
• /
• v.6 no.3
• /
• pp.177-184
• /
• 1974

File fish Navodon modestus was dehydrated in cabinet type hot-sir drier at $48-50^{\circ}C$ for 11 hours and also yellowfin puffer Fugu xanthopterum was dried in open air at $26-28^{\circ}C$ for 30 hours. Nucleotides and their related compounds were collected by extraction with cold perchloric acid and their amounts were determined by anion exchange column chromatography. The contents of ADP, IMP, ATP and hypoxanthine in fresh file fish muscle were 22.9, 12.1, 4.9, and 3.2 ${\mu}mole/g,$ dry wt. respectively. AMP and inosine were 0.9 ${\mu}mole/g,$ dry wt. equally. In fresh yellowfin puffer muscle, the contents of ADP, ATP, AMP, inosine and hypoxanthine were 25.6, 2.4, 1.6, 0.3, 0.6, and 0.4 ${\mu}mole/g,$ dry wt. respectively. In the case of file fish, ADP and ATP tended to degrade rapidly during hot-air dehydration. The contents of IMP were decreased slightly while AMP and inosine were increased. And another case of yellowfin puffer, ADP also tended to degrade rapidly during sun drying while AMP, IMP, inosine and hypoxanthine were increased. Especially, in both case of file fish and yellowfin puffer, inosine was increased twenty five and thirty five times during drying respectively.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.229-237
• /
• 2009

This study was conducted to compare the quality of the pork from finishing pigs that were fed diets containing different levels of methyl sulfonyl methane (MSM). A total of 135 crossbred pigs $(Landrace{\times}Yorkshire{\times}Duroc)$ were fed either with a control commercial diet or the control diet supplemented with 300- and 500-ppm MSM for 158d. The pigs were slaughtered at approximately 110kg live weight and were transported to the local slaughterhouse for electrical stunning followed by exsanguination. After the slaughter, the pork muscles were dissected from each carcass, placed in wrap package bags, and stored for 8d at $4^{\circ}C$. The TEARS values of the pigs that were fed MSM diets were significantly lower (p<0.05) compared with those of the pigs that were fed with non-supplemented diets. The Na, Mg, and Ca contents of the dietary MSM were significantly lower (p<0.05) than those of the non-supplemented diets, but the Fe, Cu, and Zn contents of the dietary MSM were significantly higher (p<0.05) than those of the non-supplemented diets, and the increased level of MSM supplementation resulted in higher sulfur contents. There was no difference among the diets in terms of amino acid content. The dietary supplementation with MSM, however, led to increased saturated fatty acid and decreased unsaturated fatty acid (%) in the pork muscles (p<0.05). The sensory panelists recorded greater marbling and overall acceptability scores in the samples with 500-ppm-MSM dietary supplementation (p<0.05). These data suggest that supplementing pig diets with MSM can improve the quality of the pork and can enhance the eating quality because the sensory panels found that the pork from pigs that were fed an MSM-supplemented diet had better sensory characteristics.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.3
• /
• pp.392-400
• /
• 2011

The objectives of this study were to analyze environmental microbial contamination levels by sampling the surfaces of processing lines and equipment and to verify CCPs of the HACCP plan in a fresh-cut produce processing plant The level of airborne microorganisms in the processing plant was $10^1$ log CFU/plate/15min. Total plate counts and coliform groups of the processing facilities were 1~2 log CFU/100 $cm^2$. No E. coli or S. aureus were detected in the processing plant. However, total plate counts on the cutting board for raw materials and on the spin-dryer were $4.20{\pm}2.12$ log CFU/$cm^2$ and $4.57{\pm}0.92$ log CFU/$cm^2$, respectively. These levels were higher than the safe microbial level, and therefore, the chance of cross-contamination during processing was increased. According to the results of microbiological analyses, total aerobic bacteria and coliform groups of the samples were increased after the second washing and spin-drying steps, due to cross-contamination from the spin-dryer. Thus, an effective method that can be used for microbial control during the washing and drying steps is needed for microbial control in fresh-cut produce processing plants. The results of a verification study also suggest that modification of the HACCP plan is needed along with additional CPs, which were identified as a second washing, spin drying, and the cold storage of final products.

• Food Science and Preservation
• /
• v.9 no.1
• /
• pp.114-119
• /
• 2002

This research was performed to investigate the immnomodulative effects of ploysaccharides extracted from the fruiting body of Agarcus blazei cultivated with the media which are fermented with sugar cane bagasse containing Pueraria thunbergiana in open-air storage. In MTT test, methanol extracts from the fruiting body of A. blazei cultivated with P. thunbergiana media showed in colon carcinoma line(HT29) by 1.5∼3.5 fold and human heptoma cell line (HepG2) by 1.3 ∼2.4 fold antitumor activites compared to two types media (rice straw plus sugar cane bagasse, rice straw only) often used in the fauns. To clarify the antimutagenic principles, three extracts, Ab-l, Ab-2 and Ab-3, were separated by the solvent fractionations such as hot water, cold & hot sodium hydroxide respectively, and their antimutagenic effects was determined against N-methyl-N'-nitro-N-cnitrso-guanidine(MNNG) using Salmonella typhymurium. There was no significant differencies of inhibition levels among the used media, but Ab-3 tractions still showed a high antimutagenicity in the Ames test regardless of cultivating areas or media. To prove the cell immunofunction, nitric oxide (NO) produced from Raw 264.7 matrophage cultured with three fractions (Ab-l, Ab-2, Ab-3) was measured, and showed generally increase about 45 ∼58 percent compared to another two media (rice straw plus sugar cane bagasse, rice straw only), in the fraction of hot alklai extracts of the fruiting body cultivated with P. thunbergiana, which means that the media selection could be very important factors for improving medicinal effects in agaricus blazei fruiting body.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.485-492
• /
• 2017

This study investigated to determine the microbial contamination levels of strawberries at harvest and distribution stages and to suggest a control measure for reducing the microbial contamination of strawberries by replacing worker's gloves used at harvest and distribution stages. According to the monitoring results, the contamination levels of total aerobic bacteria (TAB) were in the order of soil ($7.12{\pm}0.61{\log}_{10}CFU/g$), gloves ($6.06{\pm}1.80{\log}_{10}CFU/cm^2$), strawberry ($3.28{\times}0.98{\log}_{10}CFU/g$), and water ($3.08{\pm}0.55{\log}_{10}CFU/g$) at harvest stage. TAB of strawberry at was harvest stage reduced from $3.28{\pm}0.98{\log}_{10}CFU/g$ to $1.85{\pm}0.21{\log}_{10}CFU/g$ and $2.6{\pm}0.30{\log}_{10}CFU/g$ at cold and room temperature storage, respectively. By the replacement of worker's gloves and distribution temperature, TAB levels of the strawberries were significantly reduced when compared to those of the strawberries treated without replacement of worker's gloves and distributed at room temperature. For reusing the replaced gloves, washing with a commercial disinfectant, clorox, was effective to reduce microorganisms contaminated on the worker's gloves. These results demonstrated that appropriate replacement of gloves at the harvest and distribution stages is an effective method for reducing microbial contamination of fresh strawberries.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.