• Restorative Dentistry and Endodontics
• /
• 제10권1호
• /
• pp.85-92
• /
• 1984

The aim of this study was to examine the influence of the speed of grinding and coolants on mercury vaporization during amalgam removal. Forty amalgam filled stone dies were stored at $37^{\circ}C$ and 100% relative humidity for 7 days prior to the beginning of the mercury vapor experiment and were divided into 4 different groups; In Group I; Used by high speed without coolant & evacuator during amalgam removal. In Group II; Used by high speed with coolant & evacuator during amalgam removal. In Group III; Used by low speed without coolant & evacuator during amalgam removal. In Group IV; Used by low speed with coolant & evacuator during amalgam removal. The amalgam specimens were removed in a 30-second time period and mercury vapor was collected with membrane filter at 27mm from the site of removal and 45 degree above there. Samples in Group II, IV were removed with coolant spray at a flow rate of 30 ml/min with high-velocity evacuator. Mercury vapor collected membrane filter was analysed by Atomic Absorption Spectrophotometer using cold vapor method. The results were as follows; 1. The mercury vapor levels were obtained all of the Groups. 2. The mercury vapor levels of the Group II, IV (with coolant & evacuator) were less than that of the Group I, III (without coolant & evacuator). 3. The highest mercury vapor level recorded during amalgam removal procedure was Group I (used by high speed without coolant & evacuator) and its record was $0.78{\pm}0.09\;mg/m^3$, which exceed the T.L.V. by 15 times. 4. The mercury vapor level of the Group IV (used by low speed with coolant & evacuator) was more than that of the Group II (used by high speed with coolant & evacuator), but its difference was not significant, statistically. (p > 0.05)

• 한국군사과학기술학회지
• /
• 제19권5호
• /
• pp.618-628
• /
• 2016

The development of new concepts of liners is required in order to effectively neutralize the enemy's attack power concealed in the armored vehicles. A multiple-layer liner is one of possibilities and has a mechanism for explosion after penetrating the target which is known as "Behind Armor Effect." The multiple-layer explosive liner should have sufficient kinetic energy to penetrate the protective structure and explosive material react after target penetration. With this in mind, double-layer liner materials were obtained by cold spray coating methods and these material properties were experimentally characterized and used in this simulation for double-layer liners. In this study, numerical simulations in the three different layer types, i.e., single, A/B, A/B/A in terms of the layer location were verified in terms of finite element mesh sizes and numerical results for the jet tip velocity, kinetic energy, and the corresponding jet deformation characteristics were analysed in detail depending on the structure of layer types.

• 한국전자통신학회논문지
• /
• 제6권5호
• /
• pp.689-696
• /
• 2011

급식산업은 경제발전상황과 사용자의 편의성 및 고객욕구에 따라 단순급식을 벗어나 고객의 욕구를 만족시킬 수 있는 프리미엄급 급식을 요구하기 시작하였다. 급식 시스템에 도입된 식기에 RFID을 도입 하였으나, 고온과 저온 및 염도에 RFID 칩이 오작동하여 급식시스템에 문제가 발생하였다. 본 논문에서는 IT융합기술이 접목된 스마트 급식을 위하여 Food Court 배식에 RFID 칩을 넣어서 실험을 하였다. Food court 급식 시스템에서 뜨거운 음식($125^{\circ}C$)과 차가운 음식($-40^{\circ}C$) 및 염분이 함유된 음식을 반영하여 고온, 저온 실험, 염수 분무 실험을 통하여 스마트 급식의 안정성을 확보 하였다. 또한 기존의 일자형 배식, 스크램블형 배식, Marketplace 배식, Food Court 배식을 비교 분석하고 장점을 연구하였다. 본 논문연구를 통하여 Food Court 배식에 IT융합 기술인(RFID, LCD, S/W, H/W)을 적용하는 스마트 Food Court 급식산업발전에 기여할 것이다.

• 한국표면공학회지
• /
• 제49권2호
• /
• pp.202-210
• /
• 2016

This study was intended to investigate the effect of the amount of magnesium addition and heat treatment in the Al-Mg coating film in order to improve corrosion resistance of aluminum coating. Al-Mg alloy films were deposited on cold rolled steel by physical vapor deposition sputtering method. Heat treatment was fulfilled in an nitrogen atmosphere at the temperature of $400^{\circ}C$ for 10 min. The morphology was observed by SEM, component and phase of the deposited films were investigated by using GDLS and XRD, respectively. The corrosion behaviors of Al-Mg films were estimated by exposing salt spray test at 5 wt.% NaCl solution and measuring polarization curves in deaerated 3 wt.% NaCl solution. With the increase of magnesium content, the morphology of the deposited Al-Mg films changed from columnar to featureless structure and particle size was became fine. The x-ray diffraction data for deposited Al-Mg films showed only pure Al peaks. However, Al-Mg alloy peaks such as $Al_3Mg_2$ and $Al_{12}Mg_{17}$ were formed after heat treatment. All the sputtered Al-Mg films obviously showed good corrosion resistance compared with aluminum and zinc films. And corrosion resistance of Al-Mg film was increased after heat treatment.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.111-116
• /
• 2012

Oblique angle deposition (OAD) is a physical vapor deposition method which utilizes non-normal angles between the substrate and the vaporizing source. It has been known that tilting the substrate changes the properties of the film deposited on it, which was thought to be a result of morphological change of the film. In this study, OAD has been applied to prepare single and multilayer Al films by magnetron sputtering. The magnetron sputtering source of 4 inch diameter was used to deposit the films. Al films have been deposited on Si wafers and cold-rolled steel sheets. The multilayer films were prepared by changing the tilting angle upside down at each layer interval, which means that when the first layer was deposited at an angle of $+45^{\circ}$, the second layer was deposited at an angle of $-45^{\circ}$, and vice versa. The microstructure, surface roughness and reflectance of the films were investigated using a scanning electron microscope, a surface profiler and a spectrophotometer, respectively. The corrosion resistance was measured and compared using the salt spray test. The single layer film prepared at an oblique angle of $60^{\circ}$ prepared at other angles. However, for the multilayer films, the film prepared at an oblique angle of $45^{\circ}$ showed the most compact and featureless structure. The multilayer films were found to exhibit higher corrosion resistance than the single layer films.

• 대한치과보철학회지
• /
• 제17권1호
• /
• pp.23-34
• /
• 1979

In this study, the adhesive strength of three commercial polycarboxylate cements to ten types of dental casting alloys, such as gold, palladium, silver, indium, copper, nickel, chromium, and human enamel and dentine were measured and compared with that of a conventional zinc phosphate cement. The $8.0mm{\times}3.0mm$ cylindrical alloy specimens were made by casting. The enamel specimens were prepared from the labial surface of human upper incisor, and the dentine specimens were prepared from the occulusal surface of the human molar respectively. Sound extracted human teeth, which had been kept in a fresh condition since, extraction, were mounted in a wax box with a cold-curing acrylic resin to expose the flattened area. The mounted teeth were then placed in a Specimen Cutter (Technicut) and were cut down under a water spray, and then the flat area on the all specimens were ground by hand with 400 and 600 grit wet silicone carbide paper. Two such specimens were then cemented together face-to-face with freshly mixed cement, and moderate finger pressure was applied to squeeze the cement to a thin and uniform film. All cemented specimens were then kept in a thermostatic humidor cabinet regulated at $23{\pm}2^{\circ}C.$ and more than 95 per cent relative humidity and tested after 24 hours and 1 week. Link chain was attached to each alloy specimen to reduce the rigidity of the jig assembly, and then all the specimens were mounted in the grips of the Instron Universal Testing Machine, and a tensile load was delivered to the adhering surface at a cross head speed of 0.20 mm/min. The loads to which the specimens were subjected were recorded on a chart moving at 0.50 mm/min. The adhesive strength was determined by measuring the load when the specimen separated from the cement block and by dividing the load by the area. The test was performed in a room at $23{\pm}2^{\circ}C.$ and $50{\pm}10$ per cent relative humidity. A minimum of five specimens were tested each material and those which deviated more than 15 per cent from the mean were discarded and new specimens prepared. From the experiments, the following results were obtained. 1) It was found that the adhesive strength of the polycarboxylate cement to all alloys tested was considerably greater than that of the zinc phosphate cement. 2) The adhesive strength of the polycarboxylate cements was superior to the non precious alloys, such as the copper, indium, nickel and chromium alloys, but it was inferior to the precious gold, silver and palladium alloys. 3) Surface treatment of the alloy was found to be an important factor in achieving adhesion. It appears that a polycarboxylate cement will adhere better to a smooth surface than to a rough one. This contrasts with zinc phosphate cements, where a rough helps mechanical interlocking. 4) The adhesion of the polycarboxylate cement with enamel was found superior to its adhesion with dentine.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• 대한화장품학회지
• /
• 제23권1호
• /
• pp.5-20
• /
• 1997

2차대전 이후에 미국, 유럽, 일본의 사례와 냉전 종식 후의 동구권 국가의 사례 등을 볼 때, 전쟁과 가난에 의하여 화장품 소비는 억제되며, 평화와 번영의 시기에는 그 소비가 증대된다. 그 외에도 화장품시장의 성장은 아시아권 국가에서 볼 수 있는 것처럼 경제성장, 대중매체의 발달에 의해서, 혹은, 중국본토에서 볼 수 있는 경제제도의 변화 및 정치 흐름에 의한 것일 수도 있다. 앞에서 본 전쟁, 경제, 정치흐름, 대중매체 등의 요소 이 외에도 생활방식, 종교, 윤리, 가치관 등도 화장품 시장의 성장에 영향을 줄 수 있다. 화장품은 사회의 산물이다. 사회와 그 구성원의 needs가 변하면 그에 따라 화장품도 내용물, 포장, 배송, marketing concepts, 소구사항 등도 변하게 된다. 많은 점에서 화장품은 우리사회의 거울이며, 사회변화를 반영한다. 1970년대 초반까지 미국에서의 화장품은 주로 백인 영성을 위하여 개발되었다. 그러나 60년대의 시민권운동 이후, 70, 80 년대에는 미국의 흑인 여성을 위한 제품(색조화장)시장이 급성장하였으며, 안전성이 제대로 검토되지 않은 원료의 사용으로 부작용이 증가하였다. 이에 따라 FEA 규제에 의하여 70년대부터는 제품에 사용원료를 명기하게 되었다. 기존 원료의 안전성이 다시 검토되었으며 안전성이 확인되지 않은 많은 원료, 특히 기존에 사용되던 많은 색소의 사용이 제한되었다. 결과적으로 안전을 중시하는 "hypoallergenic" 화장품이 유행하였고, 원료의 사용에서도 기능성 있는 복잡한 이름의 원료보다는 소비자에게 쉽게 인식되는 이름의 원료를 선택하게 되었다. 유럽에서도 신원료명기법이 제정되어 신제품 개발을 위한 개발자의 원료선택에영향을 미치게 되었다. 그러나 원료의 명기에 따라 경쟁사의 제품복제가 매우 쉬워졌다. 환경오염도 마찬가지로 화장품 흐름에 영향을 미친다. 예를 들어 성층권의 오존층이 얇아지면서 suncare 제품의 소비가 늘었다. Hair spray제품에 있어서는 propellant로 사용되는 CFC가 오존층 파괴의 주범임이 밝혀지고 나서는 propellant를 다른 것으로 대체한 제품들이 많이 나왔으나 예전에 hair spray가 끌었던 만큼의 인기는 회복할 수 없었다. 이외에도 천연화장품원료의 증가. 비 동물시험법의 개발, 포장의 간소화 등은 시대의 변화를 반영하는 것 들이다. 한편 70년대에 고조에 달했던 아무런 효과도 없는 화장품에 대한 비판에 대해서 80년대에는 효능 위주의 제품이 미국을 휩쓸었으며, FDA에 의하여 이에 제동이 걸렸다. 그러나 고기능성 화장품에 대한 소비자의 요구는 끊이질 않았다. 이때에 유명한 원료로는 AHA가 있으며 이를 사용한 화장품이 의약품이냐 화장품이냐 하는 논쟁이 있었다. 이와 같이 의약품과 화장품의 구분을 명확히 할 필요성이 제기되었으며, 기능성 화장품은 미국에서는 OTC, 일본에서는 quasi-drug 라고 구분하였다. Cosmeceuticals는 cosmetics와 pharmaceuticals의 합성어이며, 90년대 미국에서 관심을 끌었고, 세계적인 관심사가 되었다. 과거에 식품업계에서 nutraceuticals라는 단어가 사용되었으나 FDA에 의하여 의약품으로 분류될 위험성으로 인하여 이 단어를 전면으로 사용하진 않았으며, 무기물과 비타민을 사용한 경우에는 nutra-cosmeceuticals라는 단어를 사용할 수도 있었으나 이 또한 FDA와의 문제가 생길 소지가 있어 사용이 자제되었다. 법적규제에도 불구하고, 소비자의 요구와 새로운 기술에 의하여 계속 개발되고 있으며, 수많은 아시아의 소비자의 욕구를 충족시키기위한 새로운 종류의 cosmeceuticals가 21세기의 문턱에서 범람하고 있다. 아시아권의 화장품시장은 성장을 계속하고 있으며, cosmeticals중에서도 미백 제품이 가장 중요한 종류이다. 백인여성은 갈색의 피부를 갖길 원하는 반면 일본, 중국, 한국의 여성들은 하얀 피부를 갖고자 한다. 단순히 안료를 사용하는 방법이 아닌 피부자체가 하얗게 되길 바라는 것이다. 미국에서는 OTC로 구분된 hydeoquinone이 일본과 한국에서는 사용이 금지되고 있으며, 안전하고 새로운 미백원료의 개발을 위한 탐색이 계속되고 있다. 즉 미국과 유럽의 화장품 회사는 피부를 검게 하기 위하여 melanogenesis를 활성화시키는 방법을 찾고 있으며, 이와 반대로 아시아권의 화장품회사는 melanin합성을 억제하기 위한 방법을 찾고 있다. 각기 다른 소비자의 취향을 만족시키기 위해서 21세기의 화장품 과학자는 상당히 바쁠 것임에 틀림이 없다.임에 틀림이 없다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제17권11호
• /
• pp.1615-1634
• /
• 2004

A review was undertaken to obtain information on the sustainability of pig free-range production systems including the management, performance and health of pigs in the system. Modern outdoor rearing systems requires simple portable and flexible housing with low cost fencing. Local pig breeds and outdoor-adapted breeds for certain environment are generally more suitable for free-range systems. Free-range farms should be located in a low rainfall area and paddocks should be relatively flat, with light topsoil overlying free-draining subsoil with the absence of sharp stones that can cause foot damage. Huts or shelters are crucial for protecting pigs from direct sun burn and heat stress, especially when shade from trees and other facilities is not available. Pigs commonly graze on strip pastures and are rotated between paddocks. The zones of thermal comfort for the sow and piglet differ markedly; between 12-22$^{\circ}C$ for the sow and 30-37$^{\circ}C$ for piglets. Offering wallows for free-range pigs meets their behavioural requirements, and also overcomes the effects of high ambient temperatures on feed intake. Pigs can increase their evaporative heat loss via an increase in the proportion of wet skin by using a wallow, or through water drips and spray. Mud from wallows can also coat the skin of pigs, preventing sunburn. Under grazing conditions, it is difficult to control the fibre intake of pigs although a high energy, low fibre diet can be used. In some countries outdoor sows are fitted with nose rings to prevent them from uprooting the grass. This reduces nutrient leaching of the land due to less rooting. In general, free-range pigs have a higher mortality compared to intensively housed pigs. Many factors can contribute to the death of the piglet including crushing, disease, heat stress and poor nutrition. With successful management, free-range pigs can have similar production to door pigs, although the growth rate of the litters is affected by season. Piglets grow quicker indoors during the cold season compared to outdoor systems. Pigs reared outdoors show calmer behaviour. Aggressive interactions during feeding are lower compared to indoor pigs while outdoor sows are more active than indoor sows. Outdoor pigs have a higher parasite burden, which increases the nutrient requirement for maintenance and reduces their feed utilization efficiency. Parasite infections in free-range pigs also risks the image of free-range pork as a clean and safe product. Diseases can be controlled to a certain degree by grazing management. Frequent rotation is required although most farmers are keeping their pigs for a longer period before rotating. The concept of using pasture species to minimise nematode infections in grazing pigs looks promising. Plants that can be grown locally and used as part of the normal feeding regime are most likely to be acceptable to farmers, particularly organic farmers. However, one of the key concerns from the public for free-range pig production system is the impact on the environment. In the past, the pigs were held in the same paddock at a high stocking rate, which resulted in damage to the vegetation, nutrient loading in the soil, nitrate leaching and gas emission. To avoid this, outdoor pigs should be integrated in the cropping pasture system, the stock should be mobile and stocking rate related to the amount of feed given to the animals.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.