• Journal of Astronomy and Space Sciences
• /
• v.37 no.2
• /
• pp.95-104
• /
• 2020

Properties of plasmas that constitute the plasma sheet in the near-Earth magnetotail vary according to the solar wind conditions and location in the tail. In this case study, we present multi-spacecraft observations by Cluster that show a transition of plasma sheet from cold, dense to hot, tenuous state. The transition was associated with the passage of a spatial boundary that separates the plasma sheet into two regions with cold, dense and hot, tenuous plasmas. Ion phase space distributions show that the cold, dense ions have a Kappa distribution while the hot, tenuous ions have a Maxwellian distribution, implying that they have different origins or are produced by different thermalization processes. The transition boundary separated the plasma sheet in the dawn-dusk direction, and slowly moved toward the dawn flank. The hot, tenuous plasmas filled the central region while the cold, dense plasmas filled the outer region. The hot, tenuous plasmas were moving toward the Earth, pushing the cold, dense plasmas toward the flank. Different types of dynamical processes can be generated in each region, which can affect the development of geomagnetic activities.

• Ocean Science Journal
• /
• v.41 no.4
• /
• pp.227-234
• /
• 2006

Year-to-year variation of bottom cold waters around the Korea Strait was investigated based on bottom temperatures measured by submarine telephone cable between Pusan, Korea and Hamada, Japan from 1982 to 1992. The characteristics of bottom temperatures could be divided into three different groups: the Korean side, the middle, and the Japanese side. Temperature drops in summer appeared in all the three regions implying the intrusion of cold waters into the Korea Strait. Significant decreases in the Korean side were observed in 1983, 1986, 1990, 1991, and 1992 when bottom temperatures were high in the middle. In contrast, bottom temperatures significantly decreased in the middle in 1985, 1988, and 1989 when the temperature drops in the Korean side were relatively small. This tendency for a negative relationship was also shown in the second mode of an EOF analysis. In the years when bottom temperatures significantly decrease din the Korean side, the cold water along the east coast of Korea expanded offshore and its temperature was low. On the contrary, cold water in the southern region of the Ulleung Basin developed in the years when bottom temperatures decreased considerably in the middle.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.22 no.1
• /
• pp.121-133
• /
• 2020

Globally, the frequency and intensity of abnormal climate events are increasing. Since this can directly damage lives and property, it is important to establish and implement an appropriate maintenance strategy in response to abnormal weather. Facilities built in cold regions where cold wave or heavy snow occurs frequently can be more damaged by freeze-thaw than facilities located in other regions. However, there are no clear criteria for quantitatively identifying the damage of freeze-thaw and how to cope with it. Therefore, based on the results of indoor freezing tests, the freezing conditions considering regional climate characteristics were selected as one day at -14℃, two days at -7℃ or three days at -5℃. As a result, it was confirmed that they were in the freeze-thaw environment in order of Daegwallyeing (8.3 times), Cheorwon (5.3 times) and Taebeak (4.9 times) in Gangwon region. Through this study, the evaluation criteria of freeze-thaw of road tunnels were newly proposed. The freeze-thaw evaluation criteria of the road tunnel presented in this study can be used for the quantitative evaluation and maintenance strategy of tunnels in cold regions.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.957-972
• /
• 2018

Tunnels constructed in cold regions can cause serious defects such as cracks and leaks due to external temperature changes in the portals and vents. In order to prevent the freezing damage of the tunnel, appropriate measures should be applied to the section where the freeze damage is concerned. However, the specific criteria and contents for judging whether or not the anti-freeze measures are applied are not presented. In this study, the laboratory freezing tests on the temperature changes of the concrete specimens under freezing conditions were carried out. And the freeze-thaw repetition cycle (F), which can judge the possibility of freezing damage, were presented based on the heat transfer quantity (W) by experimental results of case studies. Also, we propose a classification of cold regions considering the climatic characteristics of Korea for using it to efficient design and maintenance.

• Journal of The Korean Astronomical Society
• /
• v.18 no.2
• /
• pp.100-110
• /
• 1985

The HI features associated with HII regions and radio sources in the galactic-plane are searched in the Maryland-Green Bank Galactic 21-cm Line Survey. Among the twenty-eight such objects, twenty-five show HI depression features, two no feature, and an emission feature with excess HI brightness temperature. Most of these feature are surrounded by strong HI emissions. The depth of the HI depression is proportional to the radio continuum brightness temperature. The angular dimensions of the HI feature and radio source are comparable. The small HI depressions shown at the positions of HII region located in the outer solar circle are considered to be HI self-absorption features of very cold HI gas.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.3
• /
• pp.94-101
• /
• 2008

Warming trends during winter seasons in East Asian regions are expected to accelerate in the future according to the climate projection by the Inter-governmental Panel on Climate Change (IPCC). Warmer winters may affect short-term cold hardiness of deciduous fruit trees, and yet phenological observations are scant compared to long-term climate records in the regions. Dormancy depth, which can be estimated by daily temperature, is expected to serve as a reasonable proxy for physiological tolerance of flowering buds to low temperature in winter. In order to delineate the geographical pattern of short-term cold hardiness in grapevines, a selected dormancy depth model was parameterized for "Campbell Early", the major cultivar in South Korea. Gridded data sets of daily maximum and minimum temperature with a 270m cell spacing ("High Definition Digital Temperature Map", HDDTM) were prepared for the current climatological normal year (1971-2000) based on observations at the 56 Korea Meteorological Administration (KMA) stations and a geospatial interpolation scheme for correcting land surface effects (e.g., land use, topography, and site elevation). To generate relevant datasets for climatological normal years in the future, we combined a 25km-resolution, 2011-2100 temperature projection dataset covering South Korea (under the auspices of the IPCC-SRES A2 scenario) with the 1971-2000 HD-DTM. The dormancy depth model was run with the gridded datasets to estimate geographical pattern of change in the cold-hardiness period (the number of days between endo- and forced dormancy release) across South Korea for the normal years (1971-2000, 2011-2040, 2041-2070, and 2071-2100). Results showed that the cold-hardiness zone with 60 days or longer cold-tolerant period would diminish from 58% of the total land area of South Korea in 1971-2000 to 40% in 2011-2040, 14% in 2041-2070, and less than 3% in 2071-2100. This method can be applied to other deciduous fruit trees for delineating geographical shift of cold-hardiness zone under the projected climate change in the future, thereby providing valuable information for adaptation strategy in fruit industry.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.1
• /
• pp.89-113
• /
• 2023

This study aimed to identify heat wave vulnerable areas and discuss spatial typology and policy directions through spatial coincidence analysis of heat wave damage. By utilizing the climate change vulnerability assessment of the Intergovernmental Panel on Climate Change (IPCC) and Spatial Statistics Comparison Analysis, this study examined cities, counties, and districts in South Korea for five years (2015-2019), including 2018, when the heat wave was most extreme. It was determined that the number of heat wave days (exposure) was the most impactful among various factors for heat wave vulnerability. Sensitivity and adaptive capacity to heat waves were found to vary according to regional characteristics. The relationship between heat wave vulnerability and damage was categorized into four types through spatial coherence. Hot to Hot and Cold to Cold types have a positive relationship between vulnerability and damage, while Hot to Cold and Cold to Hot types have a negative relationship. The findings suggest that since different types of regions have distinct characteristics and conditions, policies and research for improvement should be directed to address each region separately. This study may be used as basic data for establishing heat-related policies in the future, as it categorizes regions by considering both heat vulnerability and damage and examines the direction of response by type.

• Geomechanics and Engineering
• /
• v.36 no.2
• /
• pp.145-156
• /
• 2024

The mechanical properties of the concrete-frozen soil interface play a significant role in the stability and service performance of construction projects in cold regions. Current research mainly focuses on the precast concrete-frozen soil interface, with limited consideration for the more realistic cast-in-place concrete-frozen soil interface. The two construction methods result in completely different contact surface morphologies and exhibit significant differences in mechanical properties. Therefore, this study selects silty clay as the research object and conducts direct shear tests on the concrete-frozen soil interface under conditions of initial water content ranging from 12% to 24%, normal stress from 50 kPa to 300 kPa, and freezing temperature of -3℃. The results indicate that (1) both interface shear stress-displacement curves can be divided into three stages: rapid growth of shear stress, softening of shear stress after peak, and residual stability; (2) the peak strength of both interfaces increases initially and then decreases with an increase in water content, while residual strength is relatively less affected by water content; (3) peak strength and residual strength are linearly positively correlated with normal stress, and the strength of ice bonding is less affected by normal stress; (4) the mechanical properties of the cast-in-place concrete-frozen soil interface are significantly better than those of the precast concrete-frozen soil interface. However, when the water content is high, the former's mechanical performance deteriorates much more than the latter, leading to severe strength loss. Therefore, in practical engineering, cast-in-place concrete construction is preferred in cases of higher negative temperatures and lower water content, while precast concrete construction is considered in cases of lower negative temperatures and higher water content. This study provides reference for the construction of frozen soil-structure interface in cold regions and basic data support for improving the stability and service performance of cold region engineering.

• The Korea Journal of Herbology
• /
• v.29 no.1
• /
• pp.27-33
• /
• 2014

Objectives : This study was carried out to identify DNA markers of "Allium sativum" be circulated from Korea and China, which is difficult to discriminate from morphological characters because of fragmental materials of bulb. That is, all these studies focused on the discrimination of Allium sativum L. But these day, Chinese A. sativum was in circulated Korean A. sativum in Korean medicine markets. Therefore, the purpose of our study was to develop molecular markers for discrimination between Korean A. sativum and imports from China. Methods : Materials were collected randomly from a markets in Korea and China and be analyzed with matK, ndhF and trnL-F regions of chloroplast DNA (cpDNA). We collected 45 A. sativum individuals from Korean and Chinese medicine markets, in 2013. Results : As a results, matK and ndhF regions of cpDNA was shown to be identify, Species that grow from warm place and cold place can divide as five SNP (Single nucleotide polymorphisms) markers in matK and ndhF genes. Also, in trnL-F regions, found one SNP that can divide Korean A. sativum and Chinese A. sativum. Conclusions : From the analysis of matK and ndhF regions of cpDNA, we presumed that three markers of cpDNA were found by useful marker that can distinguish Korean, Chinese, Warm place type, and Cold place type. Individual differences of Korean and Chinese was thought that appear in geographical difference and genetic difference by environment for long hour even if same species.

• Korean Journal of Materials Research
• /
• v.33 no.11
• /
• pp.439-446
• /
• 2023

Changes in the microstructure and mechanical properties of as-roll-bonded AA6061/AA5052/AA1050 three-layered sheet with increasing annealing temperature were investigated in detail. The commercial AA6061, AA5052 and AA1050 sheets with 2 mm thickness were roll-bonded by multi-pass rolling at ambient temperature. The roll-bonded Al sheets were then annealed for 1 h at various temperatures from 200 to 400 ℃. The specimens annealed up to 250 ℃ showed a typical deformation structure where the grains are elongated in the rolling direction in all regions. However, after annealing at 300 ℃, while AA6061 and AA1050 regions still retained the deformation structure, but AA5052 region changed into complete recrystallization. For all the annealed materials, the fraction of high angle grain boundaries was lower than that of low angle grain boundaries. In addition, while the rolling texture of the {110}<112> and {123}<634> components strongly developed in the AA6061 and AA1050 regions, in the AA5052 region the recrystallization texture of the {100}<001> component developed. After annealing at 350 ℃ the recrystallization texture developed in all regions. The as-rolled material exhibited a relatively high tensile strength of 282 MPa and elongation of 18 %. However, the tensile strength decreased and the elongation increased gradually with the increase in annealing temperature. The changes in mechanical properties with increasing annealing temperature were compared with those of other three-layered Al sheets fabricated in previous studies.