• 한국정밀공학회지
• /
• 제20권3호
• /
• pp.165-171
• /
• 2003

In a structure, many components are fastened together using bolts, nuts and rivets through drilled holes. Not only do these fastened joints enable easy assembly and dismantling, they are also able to transfer as well as to distribute loads applied onto the structures. The major drawback of such connections, however, is that the fatigue life of the components is reduced by the presence of the hole since the stress concentration around the hole is increased. In addition, the hole drilling process itself may introduce defects or roughness at the surfaces of the hole that may cause further decrease in fatigue performance of the components. For applications where fatigue loadings are important, one way to compensate the decrease in fatigue life of the components is by introduction of beneficial compressive residual stress around the hole using cold working. The material used for this research were A12024-T351 and A17050-T7451 using the primary member of aircraft. We present, In this paper, the characteristics of coldworking by evaluation of the hole expansion ratio, residual stress distribution, and fatigue properties.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권4호
• /
• pp.36-40
• /
• 2010

In this paper, a noble method for rapid cooldown of pulse tube refrigerator (PTR) was proposed and experimentally investigated. An orifice pulse tube refrigerator generates refrigeration effect by expansion PV work at the cold-end, and its amount is affected by the orifice valve opening. There exists the optimum valve opening for maximum cooling capacity and it varies as cold-end temperature. It is verified from simulation results using isothermal model that the optimum valve opening increases as the cold-end temperature increases. In the experiments, a single stage orifice pulse tube refrigerator is fabricated and tested. The fabricated PTR shows 97.5 K of no-load temperature and 10 W at 110 K of cooling capacity with the fixed orifice valve opening. From experiments, the initial cooldown curve with four cases of valve opening control scenario are obtained. And it is experimentally verified that the initial cooldown time can be reduced through the control of orifice valve opening.

• 대한치과의사협회지
• /
• 제12권1호
• /
• pp.37-42
• /
• 1974

To ascertain if the ultrasonic cleaning technique caused any dimensional changes in heat and cold curing and fluid resin denture bases and in addition to evaluate the dimensional changes of the resin denture bases stored in water and air, the author measured the distance between the outsides of two pins embedded in methyl methacrylate test denture bases by mean of 12 inch vernier caliper, accurate to 0.02mm. The results were as follows; (1) Ultrasonic cleaning didn't cause any permanent dimensional changes, but only affected temporary dimensional expansion in 16 test denture bases. (2) Temporary expansion rate caused by 10 minutes' ultrasonic cleaning was 0.29% and at the maximal temperature of the cleaning solution it was 0.64%. (3) The half of the denture bases stored in water showed the dimensional expansion rate of 0.47% while the others stored in air showed the dimensional shrinkage rate of 0.15% after 4 months.

• Journal of Biosystems Engineering
• /
• 제25권2호
• /
• pp.107-114
• /
• 2000

Low temperature storage method is to increase the value of agricultural products by reducing quality loss and regulate consignment time by controlling respiration rates of agricultural products. Respiration rate of agricultural products depends on several factors such as temperature, moisture, gas composition and a microbe inside the storage room. Temperature is the most important factor among these, which affects respiration rate and causes low or high temperature damage. Fuzzy logic was used to control the temperature of a storage room ,which uses information of uncertain facts and mathematical model for room temperature control . Room temperature was controlled better by using fuzzy logic control method rather than on-off control method. Refrigerant flow rates and temperature deviations were measured for on-off system using TEV(temperature expansion valve) and for fuzzy system using EEV(Electrical Expansion Valve) . Temperature of the Storage room was lowered faster by using fuzzy system than on -off system. Temperature deviation was -0.6~+0.9$^{\circ}C$ for on-off system and $\pm$0.2$^{\circ}C$ for fuzzy system developed. Temperature deviation and variation of temperature deviation were used as inout parameters for fuzzy system. The most suitable input and output value were found by experiment. Cooling rate of the storage room decreased while temperature deviation increased for the sampling time of 20 sec.

• 한국지반신소재학회논문집
• /
• 제19권4호
• /
• pp.21-32
• /
• 2020

세계적으로 대규모 인프라 구조 건설 시장이 확대됨에 따라 극한지 및 극서지와 같은 극한 환경에서의 토목 구조물 시공이 계획 혹은 시공 중에 있다. 이에 따라 구조물의 지지력 확보를 위한 말뚝 기초의 시공이 필수적이나 극한지 및 극서지의 지반 변형 가능성으로 인해 말뚝 기초의 안정성 및 기능 상실이 우려된다. 따라서 본 연구에서는 새로운 형식의 말뚝 기초를 개발함으로써 지반 변형에 대응하고자 하며, 극한지 및 극서지에서 발생 가능한 지반 변형을 크게 융기 및 침하로 구분하였다. 지반 변형 대응형 말뚝은 강관 말뚝 내부에 수축 및 팽창이 가능한 실린더가 삽입된 형태로 융기 및 침하 과정에서 실린더의 거동에 따른 말뚝 영향을 수치해석적으로 분석하였다. 수치해석 결과 지반 융기는 말뚝의 과도한 인장응력을 발생시켰으며, 실린더의 팽창 조건은 말뚝에 작용하는 인장 응력을 분담해 주어 전체적으로 말뚝에 작용하는 축 응력을 감소시켰다. 지반 침하는 부주면 마찰력 발생에 따른 말뚝의 압축응력을 증가시켜 주었는데, 실린더는 중립점 이하에 위치하여 수축 거동 시 최적의 효율을 보여주었다. 하지만 지반 변형 대응형 말뚝 시공 시 수축 및 팽창량은 상부 구조체의 허용 변위 범위를 준수하여야 하며, 설계 시 이에 따른 고려가 필요할 것으로 판단된다.

• International journal of advanced smart convergence
• /
• 제12권3호
• /
• pp.221-232
• /
• 2023

Recently, due to the expansion of the logistics industry, demand for logistics automation equipment is increasing. The modern logistics industry is a high-tech industry that combines various technologies. In general, as various technologies are grafted, the complexity of the system increases, and the occurrence rate of defects and failures also increases. As such, it is time for a predictive maintenance model specialized for logistics automation equipment. In this paper, in order to secure the operational reliability of the ICT/Cold-Chain Unmanned Storage, a predictive maintenance system was implemented based on the LSTM model. In this paper, a server for data management, such as collection and monitoring, and an analysis server that notifies the monitoring server through data-based failure and defect analysis are separately distinguished. The predictive maintenance platform presented in this paper works by collecting data and receiving data based on RabbitMQ, loading data in an InMemory method using Redis, and managing snapshot data DB in real time. The predictive maintenance platform can contribute to securing reliability by identifying potential failures and defects that may occur in the operation of the ICT/Cold-Chain Unmanned Storage in the future.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제24회 춘계학술대회논문집
• /
• pp.381-385
• /
• 2005

최근 우주 개발 기술은 "더 빠르고, 저렴하고, 효율적인"으로 표현할 수 있다. 이런 장치들 사이에서 마이크로 추진 장치는 필수적인 요소이다. 또한 마이크로 노즐은 마이크로 추진 장치에서 가장 중요한 부분이다. 냉가스 추력기의 경우, 마이크로 노즐은 팽창비의 변화를 통해 압축 가스내의 저장된 에너지를 운동에너지로 변환시킨다. 본 논문에서는 노즐 팽창비와 비열비에 따른 마이크로 노즐의 특성을 실험하였다. 추력은 추력 측정 장치에 부착한 스트레인게이지를 사용하여 측정하였다. 또한 실험을 통해 마이크로 노즐의 성능을 평가해보았다.

• Journal of Public Diplomacy
• /
• 제3권2호
• /
• pp.53-68
• /
• 2023

최근 국제정세는 신냉전으로 불릴 만큼 극심한 진영 간 대립의 양상을 보여주고 있다. 진영을 구분하는 요소로 가치와 규범이 강조되고 있지만 실제 갈등은 단순하게 이념과 가치에만 기반을 두기 보다는 훨씬 복잡하고 다층적인 양상을 나타내고 있다. 이러한 상황 속에서 우리 정부는 제2차 공공외교 기본계획(2023~2027)을 수립했다. 본 연구는 제1차 공공외교 기본계획과 제2차 기본계획을 비교하고 있으며, 이를 통해 바람직한 한국 공공외교의 방향에 대해 논의하고 있다. 제2차 기본계획은 지식공공외교와 정책공공외교 측면에서 더욱 확장된 내용을 포함하고 있으며, 공공외교의 수단으로서 디지털 공공외교를 강조하는 등 발전적인 내용들을 담고 있지만, 정책공공외교의 일부인 가치와 규범에 대해 명확한 내용을 제시하지 못하고 있다. 가치와 규범은 최근 국제정치의 주요 요인이지만 우리에게 중요한 국가들을 배제할 수도 있기 때문에, 글로벌 보편 가치를 설정하고 이를 추구하는 것이 정책공공외교의 주요 목표가 되어야 한다. 대립하고 갈등하는 국제정세 속에서 우리의 공공외교가 바람직한 방향으로 추진될 수 있도록 더욱 정교하고 세심한 계획 수립이 필요하다.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.942-949
• /
• 2002

The use of a combined starter/generator integrated into the drive train of an automobile offers several possibilities for improvement of fuel economy The use of such a starter/generator system is made feasible by a switch from a 14 volts electrical system to a 42 volts system, however, the sizing of the components is not a trivial problem. This study combines a dynamic electromechanical model of the starter, battery and power electronics with the nonlinear mechanics of the piston/crankshaft system and a thermofluid model of the compression and expansion processes to investigate the cold start problem. The example involves the start of an eight cylinder engine at -25 degrees Celsius. This paper shows how the mechatronic V8 engine of an automotive starter/generator system for the startability works well.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.33-38
• /
• 2002

Concrete placed under cold weather has some defects such as the decrease of initial strength by hydration delay, strength unrecovery at unhardened concrete freezing, and structural failure and crack by expansion pressure. So, in this study, we tried to evaluate the JIS mortar which was made under cold weather using de-icing agency. In mortar test, the do-icing agency increased compressive strength under standard curing, and the de-icing agency made by NaNO$_2$ gave the highest strength. However, as pre-curing time under 21$^{\circ}C$ was short, the de-icing agency made by NaNO$_2$ and Ca[NO$_3$]$_2$ had the highest strength.