1 |
Al-Obaid, Y. F., 'A Rudimentary Analysis of Improving Fatigue Life of Metals by Shot Peening,' ASME Journal of Applied Mechanics, Vol. 57, pp. 307-312, 1990
DOI
|
2 |
Almen, T. O. and Black, P. M., 'Residual Stress and Fatigue in Metals,' McGraw-Hill, New York, 1981
|
3 |
송삼홍, 주동호, 양윤진, '3중 점용접재의 균열단 열림각(CTOD)을 이용한 피로균열거동,' 한국정밀공학회지, 제18권, 제5호, pp. 148-157, 2001
과학기술학회마을
|
4 |
Chandawanich, Nopporn, 'An Experimental Study of Fatigue Crack Initiation and Growth from Coldworked Holes,' Engineering Fracture Mechanics, Vol. 11, pp. 609-620, 1979
DOI
ScienceOn
|
5 |
이동석, 이준현, '항공기 구조용 냉간가공재 Edge 변화에 따른 피로특성 연구,' 대한기계학회 제2차 재료 및 파괴부문 학술대회 논문집, pp. 259-264, 2001
|
6 |
Poolsuk, S. and Sharpe Jr., W. W.. 'Measurement of Elastic-Plastic Boundary around Cold Worked Fastener,' ASME Journal of Applied Mechanics ,Vol. 45, pp. 515-520, 1978
DOI
ScienceOn
|
7 |
유진상, 최승룡, 송정훈, 송치훈, 임원균, '홀확장과 링압인 동시적용에 의한 피로균열지연,' 대한기계학회논문집, 제21권, 제2호, pp. 305-316, 1997
과학기술학회마을
|
8 |
A. Leon, 'Benefits of Split Mandrel Coldworking,' Int. J. Fatigue, Vol. 20, No. 1, pp. 1-8, 1998
DOI
ScienceOn
|
9 |
함현욱, 김병민, 조훈, 조형호, 'Mg, Zn, Si 성분이 7xxx계 알루미늄 합금의 압출성에 미치는 영향,' 한국정밀공학회지, 제16권, 제11호, pp. 148-157, 1999
과학기술학회마을
|
10 |
Toor, P. M., 'Cracks Emanating from Precracked Cold-Worked Holes,' Engineering Fracture Mechanics, Vol. 8, pp. 391-395, 1978
DOI
ScienceOn
|
11 |
M. J. Pavier, C.G.C Poussard, D.J. Smith, 'Effect of Residual Stress around Cold worked Holes on Fracture under Superimposed Mechanical Load,' Engineering Fracture Mechanics, Vol. 63, pp. 751-773, 1999
DOI
ScienceOn
|