• Nuclear Engineering and Technology
• /
• 제48권6호
• /
• pp.1349-1359
• /
• 2016

Alternative control schemes for an Advanced High Temperature Reactor system consisting of a reactor, an intermediate heat exchanger, and a secondary heat exchanger (SHX) are presented in this paper. One scheme is designed to control the cold outlet temperature of the SHX ($T_{co}$) and the hot outlet temperature of the intermediate heat exchanger ($T_{ho2}$) by manipulating the hot-side flow rates of the heat exchangers ($F_h/F_{h2}$) responding to the flow rate and temperature disturbances. The flow rate disturbances typically require a larger manipulation of the flow rates than temperature disturbances. An alternate strategy examines the control of the cold outlet temperature of the SHX ($T_{co}$) only, since this temperature provides the driving force for energy production in the power conversion unit or the process application. The control can be achieved by three options: (1) flow rate manipulation; (2) reactor power manipulation; or (3) a combination of the two. The first option has a quicker response but requires a large flow rate change. The second option is the slowest but does not involve any change in the flow rates of streams. The third option appears preferable as it has an intermediate response time and requires only a minimal flow rate change.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제16권3호
• /
• pp.77-82
• /
• 2008

For heat pumps used in a cold region, it is very important to obtain appropriate heating capacity. Several studies using a variable speed compressor and an additional heater have been performed to enhance heating capacity at low ambient temperatures. However, for outdoor temperature conditions below $-15^{\circ}C$, it is still difficult to obtain enough heating capacity above the rated value. In recent studies, the application of gas injection technique into a two-stage heat pump yielded noticeable heating performance improvement at low temperature conditions. In this study, the heating performance of a two-stage gas injection heat pump with a rated capacity of 3.5 kW was measured and analyzed by varying refrigerant charge amount and EEV opening at the standard heating condition. The heating performance of the two-stage gas injection heat pump was compared with that of a two-stage non-injection heat pump. The heating capacity and COP of the two-stage gas injection heat pump were improved by 2-10% at the optimal charging condition over those of the two-stage non-injection heat pump.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.1001-1004
• /
• 2008

본 연구는 한중환경에서 이중 버블시트를 이용한 단열보온 양생 공법을 슬래브 및 매스 콘크리트에 활용한 결과를 검토한 것이다. 먼저, 이중 버블시트를 적용한 경우 타설 후 2일까지 외기온이 영하$9^{\circ}C$까지 강하하는 경우에도 슬래브콘크리트는 영상 $6^{\circ}C$에서 $10^{\circ}C$이상을 유지하여 초기동해가 방지됨을 알 수 있었고, 매스콘크리트의 경우에는 중심부 최고온도와 표층부 최고온도차이가 $6^{\circ}C$이하로 나타나 내부구속에 의한 수화열 균열은 발생하지 않은 것으로 판단된다. 본 현장에 적용된 이중버블시트를 이용한 단열보온양생 공법은 동절기 영하에서도 안정된 양생온도 관리로 초기동해를 방지할 수 있었고, 소요강도를 확보할 수 있었다. 또한, 가시설의 설치 해체 공정을 줄여 공기단축 효과와 인건비절감등 양생비용의 감소로써 한중콘크리트의 품질확보에 우수한 효과가 있음과 동시에 단열 양생공법의 경제성이 입증되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.748-753
• /
• 2011

철도용 전자기기의 온도 환경시험을 함에 있어 일반적으로 내한성과 내열성에 관한 시험을 수행한다. KRS 규격의 온도환경시험에서 성능확인은 양부판단의 규정이 "이상이 없어야 한다"로 대부분 되어있다. 이 문구에 대하여 시험자들은 규격 내에서 제시하는 기능시험이나 성능시험을 온도쳄버 장치를 사용하여 시험절차 중에서 수행하기 용이한 몇 가지 시험으로 성능 확인시험을 한다. 이러한 방법으로는 저온 및 고온에서 정상 동작하는지 확인이 안 되는 부품이나 회로가 생길 수 밖에 없다. 이 문제는 성능시험이나 기능시험의 종류를 늘린다고 해서 문제가 해결될 수 있는 것이 아니라고 여겨진다. 본 논문에서는 철도용품에 대한 내한성 및 내열성에 대한 KS 및 KRS 규격 검토와 온도시험의 한계를 검토하여 그에 대한 대안으로 데이터쉬트(DataSheet)의 활용으로 장착된 부품의 사용온도가 기준에 적합한지 확인하는 방법을 제시하고 실제 현장적용 사례를 들어 국내의 주요 지방의 최저온도와 최고온도 데이터를 활용한 방법으로서 일반적인 IC 부품의 온도 규격과 비교하여 온도시험 범위를 산정하는 방안에 대한 의견을 제시하고자 한다.

• 한국분말재료학회지
• /
• 제14권1호
• /
• pp.13-18
• /
• 2007

The mother Ni-W (1-5 wt.%) alloy billets for coated conductor substrate were fabricated by powder metallurgy process. The tensile test results for the sintered Ni-W rods showed the increase of mechanical strength and decrease of ductility with increasing W content due to the solid solution hardening. All the fracture surfaces of the tested specimens showed the typical ductile fracture mode of dimple rupture due to the local necking. The Ni-W alloy billets were made into tape by cold rolling. After the appropriate heat treatment for recrystallization, the brass texture formed by the cold rolling was converted to the complete cube texture. The in-plane and out of plane texture of the tapes estimated by x-ray pole figure were smaller than 9 degree and 7 degree, respectively. The effect of the W addition on the texture development seems not to be significant.

• 한국한의학연구원논문집
• /
• 제2권1호
• /
• pp.454-484
• /
• 1996

There are many factors to evoke pain, for example cold, heat, seven emotion, digestion, fatigue, venemous worms, deficiency of blood etc., and its pathogenesis is complicated. Treatments for pain in oriental medicine are as follows. 1. Pharmacotherapy is a method to treat pain by different effects of herbal medicine, for example, regulating vital energy, activating blood circulation, eliminating phlegm, and dispelling the cold evil etc. 2. Acupuncture and moxibustion therapy is a kind of external application, it has a distinct effect in relieving pain. Recently its operation method has been more developed, so new acupuncture therapies are used in clinics. There are electroacupuncture, auricular acupuncture and injection of drugs at an acupuncture points etc. 3. Oriental physiotherapy is a treatment method to stimulate acupuncture points and meridians. (1) Hot pack, Paraffin bath, Microwave, Ultrasound, Short wave, Infra-red etc. are used to treat cold syndrome by dispersing cold by warming the channels. (2) E.S.T., I.C.T., T.E.N.S., S.S.P., cupping treatment etc. are used to treat disorders of vital energy. (3) Health ion, Carbon, T.D.P., etc are used to treat conic and deficiency syndrome.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.88.1-88.1
• /
• 2010

In recent days, the study for the renewable energy is required to supplement traditional energy source. One of the renewable energy of Fuel Cell is classified according to the electrolytes. It is the MCFC (Molten Carbonate Fuel Cell) for this study. One of the equipments of the heat exchangers is important component for efficiency and cost. In MCFC system, several heat exchangers are used according to the application. It is named for the humidifier because it is to preheat the fuel and water so that a reactor will convert some of the incoming fuel to hydrogen. Then, hot side fluid service is used the exhausted gas from the fuel cell and cold side fluid service is the fuel and water. The operation temperature range is about 25~500 Celsius Degree. This heat exchanger has the problems of heat transfer considering to multiphase fluid and phase changing. So it is necessary to analyze the heat transfer characteristics and to propose the reasonable design methodology for the humidifier. In this study, the thermal characteristic for the humidifier is estimated by using commercial tool of heat exchanger design and rating. And this study provides the testing methodology and presents the results for test facility of fabrication and for testing.

• 한국강구조학회 논문집
• /
• 제23권4호
• /
• pp.483-491
• /
• 2011

본 연구에서는 구조용강재의 샤르피 충격시험(Charpy Impact Test)을 통해 저온에서의 충격 인성(Impact Toughness) 평가를 실시하여 사용 가능 온도를 파악함으로써 강재의 극한지 적용성을 검토하였다. 본 시험에 사용된 강재는 용접구조용강 중 현재 가장 널리 쓰이는 강종인 SM490B와 TMCP (Thermo-Mechanical Control Process)법에 의해 제조된 고강도 강재인 SM570-TMC이다. 또한, 본 시험결과와의 비교를 위해 남극 세종기지 건설시 사용실적이 있는 일반구조용강인 SS400에 대해서도 시험을 수행하였다. 대부분의 강구조물은 용접에 의해 제작되므로, 강재의 극한지 적용성 검토를 위해 용접시험판을 제작하여 모재(Base Metal), 용접금속(Weld Metal) 및 열양향부(Heat Affected Zone)에 대해서 충격시험을 실시하였다. 단, SS400의 경우에는 용접구조용강재가 아니므로 모재에 대해서 충격시험을 실시하였다. 대상 강재의 샤르피 충격시험을 통해서 저온에서의 충격흡수에너지 값을 구하고 이를 강재의 항복응력에 따른 충격흡수에너지의 기준값과 비교함으로써 강재의 사용온도를 결정하였으며, 이를 통해서 구조용강재의 극한지 적용성을 검토하였다.

• 사상체질의학회지
• /
• 제9권1호
• /
• pp.25-101
• /
• 1997

The physiologic and pathologic theories of "The Yellow Emperor's Canon of Internal Medicine (黃帝內經)" were based on yin-yang theory. It has been an important constituent of traditional Chinese medicine, and the eight principal syndromes have been main guidelines in diagnosis and treatment. Recently it had an great influene on the formation of the pathophysiology of Constitutional medicine. Therefore each constitution menifests special pathophysiologic propriorities of the eight pricipal syndromes, especially specific to one's constitution. So we can recognize specific patterns of the yin and yang, cold and heat, exterior and interior, deficient and excessive syndromes through a series of processes distinguishing one's constitution. The theory of the Constitutional medicine, however, has contained those achievements in a new angle and view the problem from a little different standpoint. The dynamic relationships inevitably have caused certain changes and distortions in the meaning and application of eight principles. These are a progress in medical science, and this advance is the stirring venture of Lee jaema. This thesis has intended to show the delicate relationship between the two, and investigate into these "changes and distortions".

• 대한기계학회논문집
• /
• 제14권2호
• /
• pp.276-287
• /
• 1990

In this paper research result of transient thermal stress analysis of power plant turbine rotors for life prediction under severs operating conditions is presented. Galerkin's recurrence scheme is used for numerical solution of discretized FEM equation of transient heat conduction equation. Boundary conditions for the equation and operating conditions are intensively investigated for accurate life prediction of turbine rotors in operation. A computer program for on-site application is developed and tested. Distribution of thermal stress in turbine rotors during various operating condition is analyzed with the program and it is found that the peak thermal stress appears during cold stage conditions at the first stage of high pressure rotors.