• 대한기계학회논문집A
• /
• 제38권5호
• /
• pp.475-482
• /
• 2014

유압밸브 구동용 서보 액추에이터는 항공기, 자동차의 유압시스템 그리고 산업용 유압시스템의 정밀한 작동에 중요한 장치이다. 서보 액추에이터의 신뢰성 있는 동작은 전체 유압시스템의 정밀한 제어에 큰 영향을 미친다. 서보 액추에이터의 주파수 응답특성, 스텝 응답특성과 같은 응답특성은 액추에이터의 성능을 판단하는 중요한 기준이 된다. 본 논문에서는 신뢰성해석을 통해 신뢰성 있는 동작과 응답특성을 만족시키기 위한 구성 부품에 대한 분석을 실시하였다. 또한 신뢰성 있는 동작과 빠른 응답성을 구현하기 위해 현장의 경험적 지식과 문헌 및 전문가의 전자기 이론을 통해 유압밸브 구동용 서보 액추에이터의 설계 파라미터를 도출하였다. 보빈, 요크, 플런저의 설계값, 그리고 코일의 감긴 수와 같은 서보 액추에이터의 설계값들을 결정하는 설계 파라미터를 제안하고, 설계방정식을 통해 산출한 설계값을 유한요소해석을 통해 타당성을 검증하였다. 또한 서보 액추에이터가 장착된 유압밸브의 성능시험을 통해 제안한 설계 방안의 타당성을 검증하였다.

• 센서학회지
• /
• 제21권3호
• /
• pp.229-234
• /
• 2012

The existing permeability measurements based on pressure differential between the polymer membrane that is permeable to measure the amount of oxygen used, but these methods must be kept in a vacuum, and the measurement of the membrane with low permeability in the membrane is too time consuming. In recent years by using electrochemical method polymer membrane currents caused by the amount of oxygen is a measure of how much is used. In this study, apparatus consisting of one anode and six cathodes for multi-oxygen permeability tester used the same number of membranes produced by electrochemical oxygen permeation characteristics. In this study, one silver/silver chloride anode electrochemical method with a hexagonal sensor to put various kinds of polymer membranes with the six oxygen permeability for simultaneous measurement in real-time systems. Six cathodes (Pt), and one of the coil-shaped anode (Ag/AgCl) to form a hexagonal one of the polarographic oxygen sensor in a single measurement system by six sensors. Each sensor for making hexagonal specificity of the sensor to compensate for the conditions obtained in a pure nitrogen gas and pure oxygen gas conditions. With this study, self-developed hexagonal sensor capable of measuring sensors and oxygen permeability tester, for a multi-six different oxygen permeability characteristics of the membrane measured at the same time.

• International Journal of Aeronautical and Space Sciences
• /
• 제4권1호
• /
• pp.63-74
• /
• 2003

The vortical flow of a 65-deg flat plate delta wing with a leading edge extension(LEX) was examined through off-surface visualization, 5-hole probe and hot-film measurements. The off-surface flow visualization technique used micro water droplets generated by a home-style ultrasonic humidifier and a laser beam sheet. The angles of attack ranged from 10 to 30 degrees, and the sideslip angles ranged from 0 to -15 degrees. The Reynolds number was $1.82{\times}10^5$ for the flow visualization, and $1.76{\times}10^6$ for the 5-hole probe and hot-film measurements. The comparison of the visualization photos and the flow field measurement showed that the two results were in a good agreement for the relative position and the structure of the wing and LEX vortices, even though the flow Reynolds numbers of the two results were much different. The wing vortex and the LEX vortex coil each other while maintaining a comparable strength and identity at zero sideslip. Neither a looping of the wing vortex around the strake vortex, nor the lopsided coiling of the stronger strake and the weaker wing vortices was observed. At non-zero sideslip, the downward movement of the LEX vortex when going downstream was enhanced on the windward side, and the downward and inboard movement of the LEX vortex when going downstream was suppressed on the leeward side. The counterclockwise coiling of the wing and LEX vortices was decreased significantly on the leeward side.

• 융합신호처리학회논문지
• /
• 제15권4호
• /
• pp.148-154
• /
• 2014

본 논문에서는 교차로에 설치된 한 대의 카메라를 활용하여 각 도로로 유입, 유출 되는 교통량을 동시에 측정할 수 있도록 하였으며 그 데이터를 기반으로 영상처리를 통해 신호등을 자동으로 제어하는 새로운 시스템을 제안한다. 또한 왕복 8차선 교차로의 교통량을 한 대의 카메라로 모니터링 가능하게 하여 차선 1개당 1대의 카메라 또는 루프 코일을 사용하던 기존 방식보다 효율적으로 광범위한 교통량 흐름을 통계적으로 모니터링 할 수 있도록 고안하였다. 실시간으로 배경영상이 업데이트되므로 불규칙적인 조건을 갖는 실 상황에서도 자동차 객체가 효율적으로 검지되도록 하였으며 관심영역 설정으로 보다 정확도 높은 교통량 측정을 가능하게 하였다. 본 논문에서 제안한 신호등 자동제어 알고리즘을 이용하여 정체가 일어나기 전에 각 도로간 교통량을 조절함으로써 교통 정체로 발생하는 운전자의 시간 낭비 및 에너지 낭비를 예방할 수 있다.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.869-874
• /
• 2014

It was discovered in a Korean PWR that an extensive number of very short and shallow cracks in the SG tubes were undetectable by eddy current in-service-inspection because of the masking effect of sludge deposits. Axial stress corrosion cracks at the outside diameter of the steam generator tubes near the line contacts with the tube support plates are the major concern among the six identical Korean nuclear power plants having CE-type steam generators with Alloy 600 high temperature mill annealed tubes, HU3&4 and HB3~6. The tubes in HB3&4 have a less susceptible microstructure so that the onset of ODSCC was substantially delayed compared to HU3&4 whose tubes are most susceptible to ODSCC among the six units. The numbers of cracks detected by the eddy current inspection jumped drastically after the steam generators of HB4 were chemically cleaned. The purpose of the chemical cleaning was to mitigate stress corrosion cracking by removing the heavy sludge deposit, since a corrosive environment is formed in the occluded region under the sludge deposit. SGCC also enhances the detection capability of the eddy current inspection at the same time. Measurement of the size of each crack using the motorized rotating pancake coil probe indicated that the cracks in HB4 were shorter and substantially shallower than the cracks in HU3&4. It is believed that the cracks were shorter and shallower because the microstructure of the tubes in HB4 is less susceptible to ODSCC. It was readily understood from the size distribution of the cracks and the quantitative information available on the probability of detection that most cracks in HB4 had been undetected until the steam generators were chemically cleaned.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.699-708
• /
• 2000

To make compact evaporator, experiments that show characteristics of evaporating heat transfer and pressure drop in the helically coiled small diameter tube were taken in this research. The experiments were performed with HCFC-22 in the helically coiled small diameter tube; inner diameter=1.0(mm), tube length=2.0(m), and curvature diameter=31, 34, 46.2(mm). The experiments were also carried out with the following test conditions; saturation pressure=0.588(MPa), mass velocity=$150{\sim}500(kg/m^2s)$, and heat flux=$1{\sim}5(kW/m^2)$. The experiment results are that the empirical correlation to predict heat transfer coefficient for single phase flow in helically coiled small diameter tube was obtained. It was found that dry-out is occurred at low-quality region for evaporation heat transfer because of breaking of annular liquid film. The friction factor of single phase flow of helically coiled tube was agreed with Prandtl's correlation. Finally, It was proposed for correlation that can precisely predict the friction factor of two phase flow of helically coiled tube.

• 한국미생물·생명공학회지
• /
• 제28권5호
• /
• pp.279-284
• /
• 2000

This study was per-formed to screen lactic acid bacteria poultry for the probiotic use. Among the previously obtained acid tolerant, 139 strains, 111 strains were selected with MRS medium containing 0.3% oxgall. 34 strains of 111 was re-selected by Gram-staining and acid producing ability. These strains was identified by MIDI Sherlock Microbial Identification System. Among the identified 34 strains Lactobacillus fermenum YL-3 was selected for the final pro-biotic use because of the good growth and high survival rate at pH 2.0. 60%, 50% and 40% cells of Lactobacillus fermentum YL-3 survived at pH 3.0, 2.5 and 2.0, respectively. More than $10^{7}$ / CFU/ml survived when exposed with the number of $10^{8}$ CFU/ml at pH 2.0 after 12 hr. L.fermenum YL-3 maintained growth in MRS broth containing 0.3, 0.5, 1.0 and 2.0% oxgall for 24 hr. L.fermenum YL-3 showed an inhibitory effect against pathogenic strains of Sal. enteritidis and E. coli O157:H7. In mixed culture with L.fermenum YL-3 Sal. enteritidis lost ability com-pletely in 15 hrs and E. coil O157:H7 in 16 hrs.

• 융복합기술연구소 논문집
• /
• 제3권2호
• /
• pp.11-15
• /
• 2013

These days, the quality of goods is required to improve in the process of manufacturing the semiconductor through the short working hours and clean transportation. The non-contact transport device using magnetic levitation can be a solution in the manufacturing process. The non-contact transport device, using electromagnetic actuation, is the system that can actually transport them by only using attraction force from the electromagnetic source without authentic contact. Moreover, the system using electromagnetic force has a substantial number of benefits ranging from unrestricted design to unlimited expansion. Especially, the price is competitive. The non-contact transport device, using electromagnetic force, has another merits in controlling by giving the same amount of attraction force to ferromagnetic body. By controlling the currents given to coil, the operator is able to decide the direction of the transportation. In order to design the optimal system, we implemented five different things such as the presence of the links below the electromagnetic, the electromagnet changes due to coupling method, the change according to the thickness of the links below electromagnet, due to changes in between electromagnetic distance direction, and the size of the current. Through simulations and the optimum design, it seems to control easily and figure out the exact size of power. It might definitely be the non-contact transport that can sharply reduce tiny scratches and particles in the process of manufacturing the semiconductor.

• 한국산학기술학회논문지
• /
• 제12권9호
• /
• pp.4101-4106
• /
• 2011

본 논문에서 기존 underpass와 via를 갖는 단층 나선형 박막 인덕터를 확장하여 제한된 점유면적 내에서 인덕턴스를 증가시킬 수 있는 하층 나선형 코일과 via를 갖는 2층 나선형 박막 인덕터의 구조를 제안하고 주파수 특성을 확인하였다. 인덕터의 구조는 Si를 $300{\mu}m$, $SiO_2$를 $7{\mu}m$으로 하였으며, Cu 코일의 폭과 선간의 간격은 각각 $20{\mu}m$으로 설정하여 3회 권선하였다. 나선형 박막 인덕터의 성능을 나타내는 인덕턴스, quality-factor, SRF에 대한 주파수 특성을 HFSS로 시뮬레이션 하였다. 2층 나선형 박막 인덕터는 0.8~1.8GHz 범위에서 3.2nH의 인덕턴스, 2.5GHz에서 최대 8.2 정도의 품질계수를 가지며, SRF는 5.8GHz로 시뮬레이션 결과를 얻었다. 반면에 단층 나선형 박막 인덕터는 0.8~1.8GHz 범위에서 1.5nH의 인덕턴스, 8GHz에서 최대 18 정도의 품질계수를 가지며, SRF는 19.2GHz로 시뮬레이션 결과를 얻을 수 있었다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.451-457
• /
• 2021

Recently, the number of interventional procedures has increased dramatically as an alternative of invasive surgical procedure and patient radiation exposure is also increasing accordingly. In this study, we evaluated the patient dose of major interventional procedures nationwide and we established our Korean database. With these results, we tried to suggest the reference dose level for major interventional procedures. We evaluated patent dose data in the field of interventional radiology from foreign countries. Measurement of radiation dose exposure for 11 major interventional procedures was conducted using embedded DAP meters in 10,006 patients from 47 hospitals, and reference level of each interventional procedure was suggested. The DRLs of each intervenional procedure are as follows: TACE 206(Gy·cm²), AVF 12(Gy·cm²), LE intervention 43(Gy·cm²), TFCA 122(Gy·cm²), Cerebral aneurysm coil embolization 214(Gy·cm²), PTBD 22(Gy·cm²), Biliary stent 60(Gy·cm²), PCN 7(Gy·cm²), Hickman catheter 2.1(Gy·cm²), Chemoport 1.4(Gy·cm²), BAE 104(Gy·cm²). Compared with the previously established DRL in 2012, the radiation dose decreased in all 10 interventional procedures. In the future, continuous publicity and education on the radiation dose reduction will be needed.