• 제목/요약/키워드: cohesive agent

검색결과 39건 처리시간 0.032초

고분자(高分子) 계면활성제(界面活性劑)에 관(關)한 연구(硏究) (제(第) 2 보(報));나트륨 알파 술폰 지방산(脂肪酸) 비닐에스테르 올리고머류(類)의 계면활성(界面活性) (Studies on the Polymeric Surface Active Agent (II);Synthesis Activities of Sodium ${\alpha}-Sulfo$ Fatty Acid Vinyl Ester Oligomers)

  • 정노희;남기대;소부영;소희준
    • 한국응용과학기술학회지
    • /
    • 제6권1호
    • /
    • pp.51-57
    • /
    • 1989
  • A series of four sodium ${\alpha}-sulfo$ fatty vinyl ester oligomers including sodium ${\alpha}-sulfo$ lauric acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ myristic acid vinyl ester oligomer, sodium ${\alpha}-sulfo$ palmitic acid vinyl ester oligomer and sodium ${\alpha}-sulfo$ stearic acid vinyl ester oligomer were examined for surface activities such as surface tension, foaming power, foam stability, emulsifying power, dispersion effect, solubilization of orange OT. The critical micelle concentration(CMC) was also evaluated. Consequently, these sodium ${\alpha}-sulfo$ fatty acid vinyl ester oligomers were shown to have a good cohesive power and dispersion effect.

내표면 처리에 따른 레진 인레이와 글래스아이오노머 베이스간의 접착 (BONDING OF RESIN INLAY TO GLASS-IONOMER BASE WITH VARIOUS TREATMENTS ON INLAY SURFACE)

  • 장병성;김성교
    • Restorative Dentistry and Endodontics
    • /
    • 제25권3호
    • /
    • pp.399-406
    • /
    • 2000
  • 광중합형 글래스아이오노머 베이스에 대한 레진 인레이의 접착성을 증가시킬 수 있는 방법을 모색하고자, 이차 중합된 레진 인레이의 내표면을 여러 가지 방법으로 처리한 후 레진 인레이를 광중합형 글래스아이오노머 베이스에 레진 시멘트 접착시 내표면 처리방법이 이들의 접착에 미치는 영향을 평가하고자 하였다. 글래스아이오노머 베이스 제작을 위해서 플라스틱 봉에 직경 7mm, 깊이 2mm의 1급 와동을 형성하고 Fuji II LC를 충전하였으며, 수복용 레진(Charisma$^{(R)}$)을 사용하여 레진 인레이를 제작하였다. 레진 인레이 내면은 $50{\mu}m$ aluminum oxide particles를 이용한 sandblasting 및 silane 처리군, silane 처리군, sandblasting 군, 그리고 무처리 대조군 등 4군으로 나누어 표면처리하였으며 각 군은 22개씩의 시편을 사용하였다. 인레이와 베이스의 표면에 상아질 접착제(One-Step$^{TM}$)를 도포한 후 Choice$^{TM}$를 사용하여 레진시멘트 접착하였다. 접착 양상 평가를 위해 만능시험기로 전단접착강도를 측정하고 파단면을 입체현미경으로 관찰하여 다음과 같은 결과를 얻었다. 1. Sandblasting 및 silane 처리군이 가장 높은 접착강도(10.56${\pm}$1.95MPa)를 나타내었으며, 이는 sandblasting군 및 무처리 대조군에 비해 유의하게 높았다(p<0.05). 2. Silane 처리군(9.77${\pm}$2.04MPa)은 sandblasting 및 silane 처리군과는 접착력에 있어서 통계적으로 유의한 차이를 나타내지 않았으나, sandblasting 군 및 무처리 대조군에 벼해서는 유의하게 높은 접착강도를 나타내었다(p<0.05). 3. Sandblasting만 시행 한 군은 무처리 대조군과 비교시 접착강도에 있어 유의한 차이를 나타내지 않았다(p>0.05). 4. 파단면 관찰 결과, 모든 군에서 일부 접착계면에서의 파절을 포함하는 글래스아이오노머 베이스의 응집 파괴(cohesive failure) 양상이 가장 많이 나타났으며, sandblasting 및 silane 처리군과 silane 처리군에서는 sandblasting 군 및 무처리 대조군에 비해 상대적으로 적은 접 착계면에서의 파절(adhesive failure) 양상을 나타내었다. 5. 전단접착강도와 파절양상의 관계에서, 접착강도가 클수록 응집 파괴(cohesive failure) 양상이 많이 나타나는 경향을 보였다.

  • PDF

골재 중 0.08 mm 이하 미립분의 종류가 콘크리트의 특성에 미치는 영향 (The Influence of Fine Particles under 0.08 mm Contained in Aggregate on the Characteristics of Concrete)

  • 송진우;최재진
    • 콘크리트학회논문집
    • /
    • 제25권3호
    • /
    • pp.347-354
    • /
    • 2013
  • 최근 천연모래의 부족으로 부순 잔골재가 널리 사용되고 있다. 우리나라에서는 부순 잔골재 중의 0.08 mm 이하 미립분을 7% 이하로 제한하고 있으며 이는 ASTM의 규정과 유사한 것이나 그 외의 다른 나라의 규정과 비교할 때 상당히 엄격한 규정이다. 또한 부순 잔골재 중에는 파쇄 시에 발생하는 0.08 mm 이하 미립분을 20% 정도 포함하게 되며 물로 씻어내는 일도 용이하지 않을 뿐 아니라 자원이용의 극대화를 위해서도 잔입자량 한도의 상향 조정 가능 여부에 대한 검토가 필요하다. 그래서 이 연구에서는 0.08 mm 이하 미립분에 대한 특성 및 콘크리트 품질에 미치는 영향에 대한 실험을 실시하였으며, 비교를 위하여 실트 및 점성토 중의 미립분을 사용한 실험을 병행하였다. 미립분에 대해 실험한 결과 메틸렌블루 값은 부순 잔골재 중의 석분에 비하여 실트 및 점성토 중의 미립분에 대한 값이 보다 크게 나타났으며 또한 메틸렌블루 값은 packing density 및 액성한계, 소성한계와 높은 상관관계를 가지는 것으로 나타났다. 콘크리트 실험에서 동일한 슬럼프를 얻기 위한 고성능 감수제의 소요량은 미립분의 대체 사용량 증가에 따라 커지며, 메틸렌블루 값이 큰 미립분을 사용할 때 보다 크게 나타났다. 한편 부순 잔골재 중의 미립분을 20% 이내에서 대체 사용한 경우, 고성능감수제를 사용하여 반죽질기를 같게 한 콘크리트의 압축강도와 인장강도는 거의 변화가 없었으며 콘크리트의 건조수축량도 큰 차이를 보이지 않았다. 그러나 실트 및 점성토 중의 미립분을 대체 사용한 경우는 콘크리트의 강도가 현저히 저하하고 건조수축량도 크게 증가하는 것으로 나타났다.

도재의 표면처리에 따른 레진시멘트와의 전단결합강도 및 표면상태에 관한 연구 (A STUDY OF SHEAR BOND STRENGTH AND SURFACE CONDITION BETWEEN SURFACE TREATED PORCELAIN AND RESIN CEMENT)

  • 박상혁;박상진
    • Restorative Dentistry and Endodontics
    • /
    • 제22권1호
    • /
    • pp.144-155
    • /
    • 1997
  • This study evaluated shear bond strength between porcelain and resin cement according to various surface treatments of porcelain, and surface condition of debonded porcelain. 50 porcelain specimens(Celay block A2M7) and composite resin specimens(Clearfil Photo-Bright) were prepared, and divided into 5 experimental groups according to the treatment method of porcelain surface. 5 experimental groups by surface treatments were as follows; CONTROL Group : No surface treatment was done on the surface of porcelains. SAND Group : The surface of porcelains were sandblasted with $50{\mu}m$ aluminum oxide for 5 seconds. HF Group: The surface of porcelains were etched with 8% Hydrofluoric acid for 4 minutes. SIL Group: The surface of porcelains were coated with silane coupling agent and heated at $100^{\circ}C$ for 5 minutes. SAND+HF+SIL Group : The surface of porcelains were sandblasted with $50{\mu}m$ aluminum oxide for 5 seconds and etched with 8% Hydrofluoric acid for 4 minutes, and coated with silane coupling agent and heated at $100^{\circ}C$ for 5 minutes. After surface treatments on the prepared porcelain surface two pastes of Panavia 21$^{(R)}$ were mixed, they were applied between composite resin block and porcelain surface, and then excessive resin cements were removed, and its margin was surrounded with Oxyguard II. All specimens were stored for 24 hours in water at $37^{\circ}C$ and tested with Instron testing machine between porcelains and resin cements, and debonded porcelain surfaces were observed under Scanning Electon Microscope(Hitachi S-2300) at 20kvp. The values from each group were compared statistically by Student's t-test. The obtained results were as follows; 1. The shear bond strength without surface treatment of porcelain was the lowest among all experimental groups(p<0.05). 2. The detached porcelain surface with sandblasting alone had more remarkable cracks than with only Hydrofluoric Acid or Silane coupling 2gent, but showed the lowest value of shear bond strength among surface treated groups(p<0.05), 3. When porcelain surface was treated by hydrofluoric acid, it affected shear bond strength more than silane coupling agent, but there were no significant statistical differences(p>0.05). 4. When three methods were combined to increase shear bond strength between porcelains and resin cements, its value was the highest than the others(p<0.05). 5. In Scannig Electron Micrograph of detached porcelain surface with no treatment, the sample revealed adhesive failure between the porcelain and resin cement whereas detached porcelain surface with combination of three method cohesive failure on the porcelain.

  • PDF

Benzalkonium Chloride가 NTG-GMA/BPDM계 및 DSDM계 상아질접착제의 접착성능에 미치는 영향 (EFFECT OF BENZALKONIUM CHLORIDE ON DENTIN BONDING WITH NTG-GMA/BPDM AND DSDM SYSTEM)

  • 신일;박진훈
    • Restorative Dentistry and Endodontics
    • /
    • 제20권2호
    • /
    • pp.699-720
    • /
    • 1995
  • 본 연구는 양이온 계면활성효과를 가져 소독제로 사용되고 있는 benzalkonium chloride 수용액을 상아질 표면에 대한 습윤용 처리제로 적용시킬 경우 상아질접착제의 접착성능에 미치는 영향을 관찰하기 위해 시행되었다. 소의 하악전치 80개를 8개군으로 분류하여 순면의 상아질을 노출시켜서 산처리한 후 물로 습윤 상태를 유지시킨 대조군과 0.1%, 0.5% 및 1% 농도의 benzalkonium chloride 수용액으로 습윤시킨 실험군으로 나누어 NTG-GMA/BPDM계 상아질접착제인 All-bond 2와 DSDM 계 상아질접착제인 Aelitebond를 각각 접착시킨 후 접착시험을 시행하였다. 상아질 표면을 10% 인산수용액으로 처리한 후 습윤과정을 거친 시편을 각 접착시스템의 primer와 bonding resin을 도포하고 Aelitefil 복합레진으로 접 착시 킨후 항온조에서 24시간 방치한 뒤 인장접착강도를 측정하고, 상아질표면 및 파단면의 양상을 주사전자 현미경으로 관찰하였으며 FT-IR을 사용하여 전처리 전후의 상아질 표면을 분석하여 다음의 결과를 얻었다. 1. NTG-GMA/BPDM 계 상아질접착제 (All-bond 2)로 접착시킨 경우 물로 습윤시킨 대조군에 비해 0.1 % benzalkonium chloride 수용액으로 습윤시킨 군에서 유의하게 높은 인장접착강도를 보였으나(p<0.05), 0.5% 및 1.0 % benzalkonium chloride 수용액으로 습윤시킨 군에서는 유의한 차이가 나타나지 않았다. 2. DSDM계 상아질접착제 (Aelitebond) 로 접착시킨 경우 물로 습윤시킨 대조군과 0.1 %, 0.5% 및 1.0 % benzalkonium chloride 수용액으로 습융시킨 군 간의 인장접착강도의 유의한 차이는 없었다(p>0.05). 3. Benzalkonium chloride 수용액의 적용과 관계 없이 전체적으로 NTG-GMA/ BPDM계 상아질접착제로 접착시킨 경우가 DSDM계 상아질접착제로 접착시킨 경우보다 인장접착강도가 높았으며, 파단양상의 관찰결과에서도 NTG-GMA /BPDM계 상아질접착제를 사용한 경우는 응집성 및 혼합성 파단양상이, DSDM 계 상아질접착제를 사용한 경우는 부착성 파단양상이 우세하였다. 4. 주사전자 현미경적 관찰상에서 benzalkonium chloride 수용액 적용 유무에 따른 각 상아질 표면의 primer 도포양상의 뚜렷한 차이는 관찰되지 않았으나, 상아질 표면에 대한 benzalkonium chloride 수용액 적용 전후의 FT-IR 분석결과 에서는 0.1 % benzalkonium chloride 수용액으로 습윤 처리 시킨 군이 대조군에 비해 NTG-GMA/ BPDM 및 DSDM primer의 도포효과를 다소 향상시킨 소견이었다.

  • PDF

임시접착 후, 치면세마에 따른 Lithium Disilicate Glass-Ceramic의 레진결합강도에 대한 연구 (Resin Bond Strength of Lithium Disilicate Glass-Ceramic by Surface Cleansing Method after Temporary Cementation)

  • 정승화;이진한;오상천
    • 구강회복응용과학지
    • /
    • 제23권3호
    • /
    • pp.259-268
    • /
    • 2007
  • purpose: This study was to evaluate the shear bond strength of Lithium Disilicate Glass-Ceramic by removable method of temporary cement on the abutment tooth. Material and Method: Sixty molar teeth of human with the occlusal surface up were mounted in acrylic resin blocks. The 45 specimens were prepared to exposure dentin by diamond bur and the eugenol-containing temporary cement($Cavitec^{TM}$ ($KERR^{(R)}$, U.S.A)was applied to the dentin surfaces. After initial removal of the cement with a dental explorer, the specimens were divided into 4 groups of 15 specimens each. The dentin surfaces of the specimens were treated by rotary instrument with as follow pastes: $Zircate^{(R)}$ prophy paste(Dentsply, U.S.A), Radent Prophy Paste(Pascal company,inc. U.S.A), and Dental pumice(Wip mix corporation,U.S.A). An adhesive resin luting agent(Variolink $II^{(R)}$, Ivoclar Vivadent, Leichtenstein) including Monobond-S and $Excite^{(R)}$ was applied to all specimens. The ceramic specimens were made with an A1 ingot of IPS Empress $II^{(R)}$ (Ivoclar Vivadent, Leichtenstein). After the specimens were stored in distilled water for 48hr, the shear bond strength(MPa) was measured by a Universal testing machine(Zwick 145641, Zwick, Germany) at a 1mm/min cross-head speed. The data were statistically analyzed by one-way ANOVA and Duncan's multiple range test. Results: In all group, there were no significant differences in comparison with the control group(p>0.05). The pattern of most failure showed the mixed type of cohesive and adhesive failure. Conclusion: Resin bond strength of IPS Empress $II^{(R)}$ was not affected by removal method of the temporary cement.

차체 구조용 에폭시 접착제의 접합부 특성에 미치는 Zirconate 첨가효과 (The Effect of Zirconate Addition on the Joint Properties of Epoxy Adhesive for Car Body Assembly)

  • 정은택;이혜림;이소정;임창용;서종덕;김목순;김준기
    • Journal of Welding and Joining
    • /
    • 제31권5호
    • /
    • pp.71-76
    • /
    • 2013
  • The effect of zirconate having - NH functional group on the T-peel and lap shear strength of $CaCO_3$ containing structural epoxy adhesive for car body assembly was investigated. Curing behavior of epoxy adhesive samples were investigated by differential scanning calorimeter (DSC) techniques. The addition of zirconate up to 7.5 phr did not affect the curing mechanism of epoxy adhesive. While the small amount of zirconate addition less than 1.1 phr increased the cross-linking density, the excess addition of zirconate resulted in the increase of uncross-linked impurity. From the increase of T-peel and lap shear strength and the change of fracture mode from the adhesive failure to the mixed one, it was considered that the small addition of zirconate was effective in improving the adhesion strength of epoxy adhesive to the adherend and inorganic filler surfaces. The formation of uncross-linked impurity with the excess addition of zirconate was considered to decrease the joint strength by decreasing the cohesive strength of the cured epoxy.

Effects of Diols on the foaming and emulsion properties in surfactant solutions

  • Lee, Giam;Oh, Seong-Geun
    • 한국응용과학기술학회지
    • /
    • 제39권4호
    • /
    • pp.488-498
    • /
    • 2022
  • 본 연구에서는 계면활성제 용액에서 1,3-Butanediol, 1,2-Pentanediol, 1,2 Hexanediol 들이 cmc, 표면장력, 기포력 및 유화력에 미치는 영향을 연구 하였다. 계면활성제 수용액에 diol의 첨가는 cmc와 표면장력 저하를 초래 하였으며 기포력 및 유화력은 향상 되었다. 이러한 경향은 diol의 사슬길이가 길수록 현저 하였다. 이러한 특성은 diol의 알킬사슬과 계면활성제 분자간에 소수성 상호작용이 물분자간의 응집력을 감소시키고, 계면에서 계면활성제 headgroup간 상호작용을 증진시키기 때문이다. 또한 각 diol의 방부력을 평가하기 위하여 MIC 측정을 수행 하였으며 방부력은 1,2-HDO > 1,2-PDO > 1,3-BDO 순서였다. 본 연구의 결과들은 diol들이 화장품에서 보조 계면활성제와 방부제로 이용될 수 있음을 확인 시켜 주웠다.

치면건조제와 접착제의 사용에 따른 치면열구전색재의 전단결합강도에 관한 연구 (THE EFFECTS OF DRYING AGENTS AND BONDING AGENTS ON THE SHEAR BOND STRENGTH OF SEALANTS TO ENAMEL)

  • 임현화;장기택;김종철;한세현
    • 대한소아치과학회지
    • /
    • 제30권2호
    • /
    • pp.196-203
    • /
    • 2003
  • 전색재의 적용은 기술에 매우 민감한 술식으로써 도포 전에 치면의 완전한 건조를 요구한다. 전색재 실패의 여러 요인 중 가장 주된 원인으로는 산부식 후 전색재 도포 전의 수분 또는 타액에 의한 오염인 것으로 인정되고 있다. 본 연구는 기존의 산부식만을 해오던 술식과 수분오염의 극복을 위해 변형된 술식이 전색재의 유지력에 미치는 효과를 전단결합강도를 측정하여 비교하고자 하였다. 1, 2, 3, 4군은 unfilled sealant인 Teethmate-F를, 5, 6, 7, 8군은 filled sealant인 Ultraseal XT plus를 사용하였다. 대조군인 1군과 5군은 35% 인산으로 15초간 산부식과 세척 후 건조시켰다. 2군과 6군은 여기에 치면건조제를 도포하였고, 3군과 7군에는 접착제를 도포하고 광중합하였다. 4군과 8군은 치면건조제와 접착제를 둘 다 도포하였다. 이후 직경 3mm, 높이 2mm의 몰드를 이용하여 전색재를 접착시키고 열순환을 시행한 다음 전단결합강도를 측정하여 다음의 결과를 얻었다. 1. filled sealant(5, 6, 7, 8군)에서 전단결합강도는 unfilled sealant(1, 2, 3, 4군)에 비해 각각 유의성 있게 높은 값을 보였다(p<0.05). 2. unfilled sealant에서는 산부식 처리만 한 1군에 비해 2, 3, 4군은 유의성 있게 전단결합강도가 증가하였으며(p<0.05), 2, 3, 4군 간에는 유의한 차이를 나타내지 않았다. 3. filled sealant에서는 산부식 처리만 한 5군에 비해 6, 7, 8군의 전단결합강도가 증가하였으나 유의성 있는 차이를 보이지 않았다. 그리고 6, 7, 8군 간에도 유의한 차이는 없었다. 4. 파절면 검사결과 ailed sealant 군에서는 응집성 파절이 관찰되지 않았으나, unfilled sealant 군에서는 2, 3, 4군에서 응집성 파절이 나타났다.를 보였으며 복합 레진은 유의차가 없었다. 상악 견치 (8%), 하악 제 1소구치 (5%) 순이었다. 10. I군에서 추정되는 낭의 발생 원인으로는 치수절단술을 받은 유치가 59.2%로 가장 많았고 이외에 심한 우식 및 치료 받지 않은 외상 병력등 기타 가능한 원인들이 있었다. 11.함치성 낭의 치료법으로는 I군의 경우 61.2%에서 조대술이 시행되었고, II군과 III군의 경우 61.1%, 80.0%에서 적출술이 시행되었다.mH I처치시 SM1과 SM2는 4조각의 절편으로 절단되어 같은 양상을 보였고, GS톤의 경우는 3조각의 절편으로 절단되었다. Kpn I, Sma I, Xho I 그리고 Pst I에는 절단되지 않았다.s subsp. salicinius와 유전자 유사치가 99.60%, 99.73%를 보여 Lactobacillus salivarius subsp. salicinius로 동정되었다. 이상의 결과를 종합하면 치아우식증이 없는 소아의 타액에서 분리된 유산균 중 과산화수소를 분비하여 인공치태 형성과 휘발성 유황화합물 생성을 억제하는 분리균주는 Lactobacillus salivarius subsp. salicinius로 동정되었다.적으로 낮은 수축률과 우수한 물성을 보였으며, 나노필러를 사용한 복합레진의 경우, 기존의 hybrid 필러를 이용한 레진에 비하여 수축응력을 감소시키지는 못하였다. 나노필러를 이용한 복합레진은 개발의 초기단계이며, 물성의 증가를 위한 연구가 필요할 것으로 사료된다.또 다른 약물인 glycyrrhetinic acid($100{\mu}M$)도 CCh 자극으로 인한 타액분비를 억제하였다. 이상의 결과로 미루어 gap junction은 흰쥐 악하선 세포로부터의 타액분비 조절에 중요한 역할을 하는데, 이는 gap junction이 세포막 $Ca^{2+}$ 통로를 조절함으로써 수용체 자극으로 유발된 세포내

  • PDF

접착제 도포후 오염된 표면의 처리방법에 따른 복합레진의 전단결합강도와 미세누출 (SHEAR BOND STRENGTH AND MICROLEAKAGE OF COMPOSITE RESIN ACCORDING TO TREATMENT METHODS OF CONTAMINATED SURFACE AFTER APPLYING A BONDING AGENT)

  • 박주식;이석종;문주훈;조영곤
    • Restorative Dentistry and Endodontics
    • /
    • 제24권4호
    • /
    • pp.647-656
    • /
    • 1999
  • The purpose of this study was to investigate the shear bond strength and marginal microleakage of composite to enamel and dentin according to different treatment methods when the applied bonding agent was contaminated by artificial saliva. For the shear bond strength test, the buccal and occlusal surfaces of one hundred twenty molar teeth were ground to expose enamel(n=60) and dentin surfaces(n=60). The specimens were randomly assigned into control and 5 experimental groups with 10 samples in each group. In control group, a bonding system(Scotchbond$^{TM}$ Multi-Purpose plus) and a composite resin(Z-100$^{TM}$) was bonded on the specimens according to manufacture's directions. Experimental groups were subdivided into 5 groups. After polymerization of an adhesive, they were contaminated with at artificial saliva on enamel and dentin surfaces: Experimental group 1 ; artificial saliva was dried with compressed air. Experimental group 2 ; artificial saliva was rinsed with air-water spray and dried. Experimental group 3 ; artificial saliva was rinsed, dried and applied an adhesive. Experimental group 4 ; artificial saliva was rinsed, dried, and then etched using phosphoric acid followed by an adhesive. Experimental group 5, artificial saliva was rinsed, dried, and then etched with phosphoric acid followed by consecutive application of both a primer and an adhesive. Composite resin(Z-100$^{TM}$) was bonded on saliva-treated enamel and dentin surfaces. The shear bond strengths were measured by universal testing machine(AGS-1000 4D, Shimaduzu Co. Japan) with a crosshead speed of 5mm/minute under 50kg load cell. Failure modes of fracture sites were examined under stereomicroscope. The data were analyzed by one-way ANOVA and Tukey's test. For the marginal microleakage test, Class V cavities were prepared on the buccal surfaces of sixty molars. The specimens were divided into control and experimental groups. Cavities in experimental group were contaminated with artificial saliva and those surfaces in each experimental groups received the same treatments as for the shear test. Cavities were filled with Z-100. Specimens were immersed in 0.5% basic fuchsin dye for 24 hours and embedded in transparent acrylic resin and sectioned buccolingually with diamond wheel saw. Four sections were obtained from the one specimen. Marginal microleakages of enamel and dentin were scored under streomicroscope and averaged from four sections. The data were analyzed by Kruskal-Wallis test and Fisher's LSD. The results of this study were as follows. 1. The shear bond strength to enamel showed lower value in experimental group 1(13.20${\pm}$2.94MPa) and experimental group 2(13.20${\pm}$2.94MPa) than in control(20.03${\pm}$4.47MPa), experimental group 4(20.96${\pm}$4.25MPa) and experimental group 5(21.25${\pm}$4.48MPa) (p<0.05). 2. The shear bond strength to dentin showed lower value in experimental group 1(9.35${\pm}$4.11MPa) and experimental group 2(9.83${\pm}$4.11MPa) than in control group(17.86${\pm}$4.03MPa), experimental group 4(15.04${\pm}$3.22MPa) and experimental group 5(14.33${\pm}$3.00MPa) (p<0.05). 3. Both on enamel and dentin surfaces, experimental group 1 and 2 showed many adhesive failures, but control and experimental group 3, 4 and 5 showed mixed and cohesive failures. 4. Enamel marginal microleakage was the highest in experimental group 1 and there was a significant difference in comparison with other groups (p<0.05). 5. Dentin marginal microleakages of experimental group 1 and 2 were higher than those of other groups (p<0.05). This result suggests that treatment methods, re-etching with 35% phosphoric acid followed by re-application of adhesive or repeating all adhesive procedures, will produce good effect on both shear bond strength and microleakage of composite to enamel and dentin if the polymerized bonding agent was contaminated by saliva.

  • PDF