• 지구물리와물리탐사
• /
• 제7권1호
• /
• pp.88-92
• /
• 2004

To improve the recovery rate of unlocated buried human remains in forensic investigations, there is scope to evaluate and develop techniques that are applicable to the Australian environment. I established controlled gravesites (comprising shallow buried kangaroos, pigs, and human cadavers) in South Australia, to allow the methodical testing of remote sensing equipment for the purpose of grave detection in forensic investigations. Eight-month-old pig graves are shown to provide more distinct identifying results using ground-penetrating radar when compared to four-year-old kangaroo graves. Two further aspects of this research are presented: information (obtained from a survey) relating to the police use of geophysical instruments for locating buried human remains, and the use of electrical resistivity for locating human remains buried in a coffin. The survey of Australian police jurisdictions, covering the period 1995-2000, showed that police searches for unlocated bodies have not successfully located human remains using any geophysical instruments (such as ground-penetrating radar, magnetometers, or electrical resistivity). Lower resistivity readings were found coincident with the 150-year-old single historical burial in a heavily excavated field, in a situation where its exact location was previously unknown.

• Journal of Welding and Joining
• /
• 제12권1호
• /
• pp.73-79
• /
• 1994

Low cycle fatigue test was performed by companion specimens method to compare the properties of cyclic strain for the weldments of controlled rolling steel CR60 and welding structural steel SM58Q. And the result does not showed any difference of low cycle fatigue life between weldments. Especially, the values of coefficient of cyclic plastic strain $C_{p}$ and exponent of cyclic plastic strain $K_{p}$ of heat affected zones of CR60 steel and SM58Q steel were same. And $C_{p}$ and $K_{p}$ of CR60 steel were equal to the values of weld it means a good combination between the base metal, the heat affected zone and the weld of CR60 steel.eel.eel.

• 복식
• /
• 제60권4호
• /
• pp.98-112
• /
• 2010

This study is on the 18th-century man's clothing excavated from Mr. Kim(1683-1766)'s tomb in Cheongju, Chungbuk in 2003. There are more than 100 pieces of excavated costumes from the tomb of Won-taek Kim. The excavated costumes have the value of genuine materials. Among them, 36 garments in good condition were investigated. As a result, there are several kinds of the excavated coats with different sizes, depending on the type of coats-Simui(深衣), Danryeong(團領), Sagyusam(四揆衫), Daechang, jungchimak(中赤莫), and Sochangui. These different-size coats reveal the degree of ritual; the length of the ritual costume is longer than that of the daily one. We can see two kinds (large and small) of coats, jackets, and pants. The large-size clothing is for the dead, the small size one as daily clothing was used for filling the empty space of the coffin. Among the excavated clothing from Mr. Kim's tomb, clothing for the dead(shroud) is bigger than man's daily costume. Concerning the form, color, and materials of the costumes, clothing for the dead is similar to daily clothing, while there is the difference in their size. The oversized costumes of coats, jackets, and pants are also different in size, matching the structure of clothing.

• 복식
• /
• 제57권7호
• /
• pp.153-161
• /
• 2007

In 2004, Mal-gun(抹裙) was excavated from a plastered tomb in Seok-nam-dong, In-cheon. This tomb is assumed to be from an upper-class woman. The excavated Mal-gun was used to fill in the empty spaces in coffin, and it was seriously damaged and foxed dark. The Mal-gun is made with thin, loose Sook-cho(숙초), and the width of the fabric is 70cm. Both sides of the crotches are overlapped in front, and the back is opened. The waist straps are detached, leaving a little part to show the width of the straps. The hems of the Mal-gun are sewed straight, without any pleats, except some spaces for the feet to go through. This study compared the Mal-gun of Joseon Dynasty from the documentary records and picture records with the excavated Mal-gun from Seok-nam-dong, In-chceon. Also, actual Mal-gun was manufactured according to the excavated Mal-gun to study the process of manufacturing and the formation. As a result, the excavated Mal-gun has the same form of that shown in Ak-hak-gwae-bum, a documentary record from the early period of Joseon Dynasty.

• 보존과학연구
• /
• 통권19호
• /
• pp.23-34
• /
• 1998

Bokam-ri site was excavated from July 1996 to September 1998 and archaeologically assumed to be grouped with tombs of Mahan period. Among these groups, Tomb No. 3 had built up with stone chamber and found one pair of gilted footware near the jar coffin. This footware was severely corroded and cracked so transfered it gently with soil. Radiography film of this footware showed spike decorations on the bottom and fish-shapped ornament. Gilted footware was consolidated with soil using Paraloid B72 10%~15%solution and cleaned using small tools and microscope. SV427 and HV427 as epoxy resin and Araldite(rapid type) used for joining and restoring. The fore part of gilted footware was connected with nails and folded “L” shape to introduce the bottom material. Tortoise-shell design and flower ornaments appeared on the surface and fish-shaped ornaments, spikes and spangles on the bottom. It was found that 7 spikes and 5 fish-shaped ornaments remained well. Especially, Fish-shaped ornaments were firstly found in the gilted footware and appraised archaeologically important materials.

• 한국재료학회지
• /
• 제19권6호
• /
• pp.337-343
• /
• 2009

In this study, we optimized Pb-free Sn/Ni plating thickness and conditions were optimized to counteract the environmental regulations, such as RoHS and ELV(End-of Life Vehicles). The $B_{10}$ life verification method was also suggested to have been successful when used with the accelerated life test(ALT) for assessing Pb-free solder joint life of piezoelectric (PZT) ceramic resonator. In order to evaluate the solder joint life, a modified Norris-Landzberg equation and a Coffin-Manson equation were utilized. Test vehicles that were composed of 2520 PZT ceramic resonator on FR-4 PCB with Sn-3.0Ag-0.5Cu for ALT were manufactured as well. Thermal shock test was conducted with 1,500 cycles from $(-40{\pm}2)^{\circ}C$ to $(120{\pm}2)^{\circ}C$, and 30 minutes dwell time at each temperature, respectively. It was discovered that the thermal shock test is a very useful method in introducing the CTE mismatch caused by thermo-mechanical stress at the solder joints. The resonance frequency of test components was measured and observed the microsection views were also observed to confirm the crack generation of the solder joints.

• 열처리공학회지
• /
• 제32권1호
• /
• pp.12-16
• /
• 2019

In this study, strain-controlled low cycle fatigue test for hot rolled STS304 steel was carried out at $400^{\circ}C$ and $600^{\circ}C$, respectively. High temperature fatigue test was done using an electric furnace attached on the hydraulic fatigue test machine. The results of this study show that STS304 hot rolled steel has excellent static strength and fatigue characteristics. The hysteresis loop at half life was obtained in order to calculate the elastic and plastic strain. Also, Relationship between strain amplitude and fatigue life was examined in order to predict the low cycle fatigue life of STS304 steel by Coffin-Manson equation.

• 건축역사연구
• /
• 제32권5호
• /
• pp.31-42
• /
• 2023

This study examined the structural characteristics of the royal tomb equipped with only rail stones in the early Joseon Dynasty. Bongneung(封陵: the burial mound of royal tomb) equipped with only rail stones was constructed from 1468 to 1632. During this period, Hyeongung(玄宮: the underground chamber for the coffin of the king or queen) was constructed with lime. When the Hyeongung is completed, the soil is covered with a thickness of 1 foot parallel to the ground surface. On top of that, as the base of the Bongneung, the rail ground stone is constructed with a height of about 1.5 to 2 feet. The inside of the rail ground stone is also firmly filled with soil. On top of this, semicircular lime is installed with a convex center. Lastly the soil is divided and compacted several times to form a hill, and then covered with grass to complete the Bongneung. The notable feature is that between the Hyeongung made of lime and the Bongneung made of soil, the rail ground stone serves as a stylobate with the inside compacted by the soil.

• Journal of Mechanical Science and Technology
• /
• 제16권7호
• /
• pp.919-926
• /
• 2002

In this study, the numerical prediction of the thermal fatigue lie? of a $\mu$BGA (Micro Ball Grid Array) solder joint was focused. Numerical method was performed using the three-dimensional finite element analysis for various solder alloys such as Sn-37%Pb, Sn-3.5%Ag, Sn-3.5%Ag-0.7%Cu and Sn-3.5%Ag-3%In-0.5%Bi during a given thermal cycling. Strain values obtained by the result of mechanical fatigue tests for solder alloys, were used to predict the solder joint fatigue life using the Coffin-Manson equation. The numerical results showed that Sn-3.5%Ag with the 50-degree ball shape geometry had the longest thermal fatigue life in low cycle fatigue. A practical correlation for the prediction of the thermal fatigue life was also suggested by using the dimensionless variable γ. Additionally Sn-3.5Ag-0.75Cu and Sn-2.0Ag-0.5Cu-2.0Bi were applied to 6$\times$8$\mu$BGA obtained from the 63Sn-37Pb Solder. This 6$\times$8$\mu$BGA were tested at different aging conditions at 130$\^{C}$, 150$\^{C}$, 170$\^{C}$ for 300, 600 and 900 hours. Thickness of the intermetallic compound layer was measured thor each condition and the activation energy thor their growth was computed. The fracture surfaces were analyzed using SEM (Scanning Electron Microscope) with EDS ( Energy Dispersive Spectroscopy).

• 복식문화연구
• /
• 제8권6호
• /
• pp.822-841
• /
• 2000

The purpose of this study is to organize how the deceased are clothed. Although there are many people who have seen the dead clothed once or twice and although the clothing has been constantly going on, there have been no books or studies on how the deceased are clothed. Instead, the methods have only been handed down orally by seniors and others who are experienced in it. I see the necessity of systematizing the method of clothing the deceased so that both ordinary people as well as experts can utilize it properly to show their sincerity and courtesy towards the dead. This study is based on literature including old books, dissertations, publications, and reports on ethnic customs. It also refers from interview results of shrouds makers, those experienced in clothing the dead, and seniors knowledgeable in the trade. Funeral manifested the social status of the dead. Shrouds of the olden days had different colors, such as white, black, blue, red, etc. according to items. However, nowadays they are white, pink, or partially light blue or sometimes people just keep the colors of their original cloths. Current items do not differ much from those of the ancient times, though Kwadu, Km, and Po, which were used to cover the belly, have been relatively simplified. The form of shrouds has changed nowadays. There are differences in the funeral procedures and how the deceased are clothed. In the olden days, when a person died, the body was cleaned up and clothed the very next after death. Nowadays, the cleansing and clothing of the body and placing the body in the coffin are all done together the following day. According to the foregoing, though there are no big differences in the way the deceased are clothed between the olden days and the present, the order in which Aksu and B누 are placed, differs and the procedures, items and shape have been simplified.