• 설비공학논문집
• /
• 제16권1호
• /
• pp.70-76
• /
• 2004

High-temperature cylindrical sodium/stainless-steel heat pipes were manufactured and tested for transient as well as steady states. Total length of the heat pipe was 1 m and the diameter was 25.4 mm. Screen meshes of 3 different sizes were used to estimate the effect of mesh size on the thermal performance of the heat pipe. The minimum thermal resistance achieved was as low as 0.02$^{\circ}C$/W for the maximum thormal load of 2 ㎾. The average heat transfer coefficient in the evaporator was about 2,000 ㎾/$m^2$K and those in the condenser region were up to 5 times higher.

• KIEAE Journal
• /
• 제17권4호
• /
• pp.41-48
• /
• 2017

Purpose : Currently, 25% of the domestic energy consumption structure is used as building energy, and more than 18% of this energy is consumed in the residential. Accordingly, various efforts and policies that can save energy of the building is being performed. The various researchers are conducting research to diagnose the thermal performance of existing buildings. This study is to apply in the field of precision thermal insulation performance diagnostic method for thermal performance analysis of existing detached house in Seoul, Gangreung, Gyeongju, Pohang. And this paper is analyzed quantitatively measure the existing detached house energy performance. Method: Research methodology analyzed the thermal performance over the Heat Flow Meter method by applying the measurement process and method by applying the criteria of ISO 9869-1 & ASTR method. In this study, the surface heat transfer coefficient was calibrated by applying indoor surface heat transfer resistance with reference to ISO 6946 standard. The measurement error rate between the HFM diagnosis method and the ASTR diagnosis method was reduced and the measurement reliability was obtained through measurement method error verification. Result : As a result of the study, the thermal performance vulnerable parts of the building were quantitatively analyzed, and presented for methods which can be improved capable of efficient energy use buildings.

• 한국수산과학회지
• /
• 제34권3호
• /
• pp.254-259
• /
• 2001

프레임에 그물감을 부착하여 구성되는 우리형 구조물의 유수저항을 설계 도면으로부터 정확하게 산정하기 위한 기초 단계로 해서, 4가지 규격의 나일론 랏쉘 그물감과 2가지 규격의 PE 막매듭 그물감에 대해 회류 수조에서 수리 실험을 실시하고 저항 특성을 조사하였다. 또한 일정 기간 해중에 침지되어 생물이 부착한 그물감에 대해 저항을 측정한 기존의 실험 결과를 사용하여 그것의 저항계수를 구하고 생물이 부착되지 않은 그물감의 저항계수와 비교하였다. 실험에서 얻어진 결과를 요약하면 다음과 같다. 1. 벽 면적이 S되는 그물감이 유속 U에서 받는 저항 R을 $R=kSU^2$으로 표시할 경우 저항계수 $k(kg{\cdot}s^2/m^4)$는 $R_e$에 따라 크게 달라지는데, $R_e$의 대표 치수로서 그물코의 면적에 대한 발의 체적의 비 $\lambda,$ 즉$$\lambda=\frac{{\pi}d^2}{2L\;sin\;2{\phi}}$$을 사용하면 (d: 그물실의 지름, L: 발의 길이, $2{\phi}$: 그물코의 전개각), k는 $R_{e}<180$의 영역에서는$$k=350(\frac{{\lambda}U}{v})^{-0.25}$$으로 주어졌고, $R_e{\geq}180$의 영역에서는 큰 변화 없이 $92\~102(kg{\cdot}s^2/m^4$) 범위의 값을 취하였다. 2. 실험에 사용한 그물감들에 대해 벽 면적 S에 대한 투영 면적 $S_n$의 비인 $S_n/S$를 계산하고, 그것을 저항계수 k와 비교한 결과 $$k=98.6(\frac{S_n}{S})^{1.19}$$이 얻어 졌다. 3. 해중에 30일간 침지하여 생물이 부착된 상태의 평면 그물감에 대한 k와 $S_n$와의 관계는 $$k=176(\frac{S_n}{S})^{1.65}$$으로 주어 졌다. 4. 그물감의 유수저항은 방오 도료를 도장하지 않은 그물감보다 도장한 그물감에서 약간 더 큰 경향이었으나, 그 차이는 무시해도 좋을 정도로 작았다.

• 한국표면공학회지
• /
• 제39권5호
• /
• pp.235-239
• /
• 2006

The aluminum nitride(AlN) layer on Al7075 substrate has been formed through nitrogen ion implantation process. The implantation process was performed under the conditions : 100 keV energy, total ion dose up to $2{\times}10^{18}\;ions/cm^2$. XRD analysis showed that aluminum nitride layers were formed by nitrogen implantation. The formation of Aluminum nitride enhanced surface hardness up to 265HK(0.02 N) from 150HK(0.02 N) for the unimplanted specimen. Micro-Knoop hardness test showed that wear resistance was improved about 2 times for nitrogen implanted specimens above $5\;{\times}\;10^{17}\;ions/cm^2$. The friction coefficient was measured by Ball-on-disc type wear tester and was decreased to 1/3 with increasing total nitrogen ion dose up to $1\;{\times}\;10^{18}ions/cm^2$. The enhancement of mechanical properties was observed to be closely associated with AlN formation. AES analysis showed that the maximum concentration of nitrogen increased as ion dose increased until $5\;{\times}\;10^{17}\;ions/cm^2$.

• Fisheries and Aquatic Sciences
• /
• 제25권4호
• /
• pp.202-213
• /
• 2022

Antibiotic resistant Escherichia coli cases are increasing high especially in Southeast Asia. Illegal use of the antibiotic in the aquaculture farming may become the culprit of the outbreak and spread into environmental source. A study was conducted to: 1) detect the chloramphenicol (CAL)-resistant gene in E. coli isolated from three aquaculture farms and six rivers of northwestern Borneo and 2) investigate the correlation between cat gene with five common antibiotics used. Isolation of E. coli was done on Eosin methylene blue agar and characterized using indole, methyl red, Voges-Proskauer, citrate tests. E. coli isolates were subsequently tested for their susceptibility to five antibiotics commonly used in aqua-farming. The CAL-resistant E. coli were further analyzed for the presence of resistant genes (cat I, cat II, cat III, cat IV) using multiplex polymerase chain reaction. 42 bacterial colonies were isolated from a total of 80 individual water samples, 34 of which were identified as E. coli. Result showed 85.3% of the E. coli isolates were resistant to amoxicillin, 35.3% were resistant to tetracycline, 29.4% were resistant to CAL, 17.6% were resistant to nitrofurantoin and 8.8% were resistant to nalidixic acid. All of the 10 CAL resistant E. coli isolateswere detected with cat II genes; five isolates detected with cat IV genes; three isolates detected with cat III genes; and another two detected with cat I genes. Pearson correlation coefficient shows highly significant relationship between resistance pattern of CAL with amoxicillin; and CAL with tetracycline. Our findings provide the supplementary information of the CAL resistance gene distribution, thereby improving our understanding of the potential risk of antibiotic resistance underlying within this microbial ecosystem.

• Composites Research
• /
• 제23권2호
• /
• pp.10-16
• /
• 2010

가압주조법으로 제조된 알루미나 섬유와 SiC 입자 혼합금속복합재료의 마찰특성을 조사하였다. 핀 형태의 마모 시험편은 전체 부피비 20%에 섬유와 입자의 서로 다른 비를 갖고 있다. 혼합금속복합재료의 윤활마모시험은 핀과 디스크 타입의 마모시험기를 사용하여 수행되었는데, 상온과 고온 $100^{\circ}C$와 $150^{\circ}C$.에서의 건식마찰특성을 각각 수행하였다. 마모면의 미시분석은 주사전자현미경(SEM)으로 조사하여 마찰특성과 마모거동을 분석하였다. 시험 결과 마모저항은 상온에서는 섬유와 같은 방향인 (PR) 방향에서는 SiC입자의 증가에 따라 향상되었다. 고온에서는 섬유와 수직한 방향(N)의 마모특성은 PR방향의 섬유가 마모면으로 전체적으로 쉽게 뽑히기 때문에 PR방향의 금속보합재료의 마모특성보다 우수하였다. 한편 마찰계수는 온도증가에 따라 감소하였다.

• 한국응용곤충학회지
• /
• 제4권
• /
• pp.51-54
• /
• 1965

이화명충에 대한 수도의 저항성 요인과 척도를 구명하기 위하여 여러 가지 품종에 접종 및 방사를 하였으며 그 영향에 따라 도체의 주요성분을 분석한 바 아래와 같은 결과를 얻었다. (1) 수도품종간에 이화명충의 유충 생육이 현저하게 큰 차를 나타내었다. 품종에 따른 체중증가량에 있어서도 부화 후 25일에 유충의 체중은 최고 45.77mg, 최저 21.23mg였는데 대체로 Indica type은 Japonica type 보다 유충체중의 증가가 컸다. (2) 수도품종에 있어서 여러 가지 저항성요소중 상관관계를 보면 유충의 생존율은 체중증가, 분화, 피해경율 및 산란선택성들과 정의 상관을 나타내었다. 따라서 유층의 생존율은 이화명충에 대한 도체의 저항성요소의 척도로 이용될 수 있다고 생각되었다. (3) 저항성 및 감수성 품종의 화학적 분석 결과에 의하면 몇몇 저항성요소와 질소함량간에는 정, 그리고 규산의 함량과는 부의 상관을 나타내었으며 특히 유충의 추성에는 질소, 천공성에는 규산의 함량이 관련됨을 알 수 있었고 탄소의 함량과는 유의한 상관을 나타나지 않았다. (4) 유충의 추성 및 천공성도 저항성 척도인 생존율과 정의 상관을 나타내었으므로 저항성은 여러 가지 요소들의 복합적인 작용으로 나타난다고 생각되었다.

• Advances in nano research
• /
• 제16권2호
• /
• pp.127-140
• /
• 2024

Upon direct/indirect exposure to flame or heat, composite structures may burn or thermally buckle. This issue becomes more important in the natural fiber-based composite structures with higher flammability and lower mechanical properties. The main goal of the present study was to obtain an optimal eco-friendly composite system with low flammability and high thermal buckling resistance. The studied composite consisted of polypropylene (PP) and short abaca fiber (AF) with eggshell powder (ESP) and halloysite clay nanotubes (HNTs) additives. An optimal base composite, consisting of 30 wt.% AF and 70 wt.% PP, abbreviated as OAP, was initially introduced based on burning rate (BR) and the Young's modulus determined by horizontal burning test (HBT) and tensile test, respectively. The effects of adding ESP to the base composite were then investigated with the same experimental tests. The results indicated that though the BR significantly decreased with the increase of ESP content up to 6 wt.%, it had a very destructive influence on the stiffness of the composite. To compensate for the damaging effect of ESP, small amount of HNT was used. The performance of OAP composite with 6 wt.% ESP and 3 wt.% HNT (OAPEH) was explored by conducting HBT, cone calorimeter test (CCT) and tensile test. The experimental results indicated a 9~23 % reduction in almost all flammability parameters such as heat release rate (HRR), total heat released (THR), maximum average rate of heat emission (MARHE), total smoke released (TSR), total smoke production (TSP), and mass loss (ML) during combustion. Furthermore, the combination of 6 wt.% ESP and 3 wt.% HNT reduced the stiffness of OAP to an insignificant amount by maximum 3%. Moreover, the char residue analysis revealed the distinct differences in the formation of char between AF/PP and AF/PP/ESP/HNT composites. Afterward, dilatometry test was carried out to examine the coefficient of thermal expansion (CTE) of OAP and OAPEH samples. The obtained results showed that the CTE of OAPEH composite was about 18% less than that of OAP. Finally, a theoretical model was used based on first-order shear deformation theory (FSDT) to predict the critical bucking temperatures of the OAP and OAPEH composite plates. It was shown that in the absence of mechanical load, the critical buckling temperatures of OAPEH composite plates were higher than those of OAP composites, such that the difference between the buckling temperatures increased with the increase of thickness. On the contrary, the positive effect of CTE reduction on the buckling temperature decreased by raising the axial compressive mechanical load on the composite plates which can be assigned to the reduction of stiffness after the incorporation of ESP. The results of present study generally stated that a suitable combination of AF, PP, ESP, and HNT can result in a relatively optimal and environmentally friendly composite with proper flame and thermal buckling resistance with no significant decline in the stiffness.

• 원예과학기술지
• /
• 제30권5호
• /
• pp.557-567
• /
• 2012

본 연구는 마커이용여교잡(marker-assisted backcross, MAB)을 통한 내병성 토마토 신품종육성에 필요한 기초 정보를 얻기 위해 수행되었다. TYLCV, 시들음역병, 청고병, 흰가루병에 내병성인 공여친 계통 10종과 이병성이지만 우수 원예형질을 지닌 회복친 계통 4종에 대해 병리검정과 TYLCV 내병성 연관 분자마커 분석을 수행하였다. MAB를 위한 회복친 유전자 선발(background selection)용 마커개발을 목표로 SOL Genomics Network에 공시된 토마토 유전자지도(reference map)로부터 전 게놈에 균등히 분포된 108개(염색체 당 평균 9개) SSR 마커를 분석하여, 총 303개의 다형성 마커를 기반으로 공여친, 회복친 계통 간 유연관계를 분석하였다. 그 결과, 유사도 값의 전체 범위는 0.33-0.80으로계통 간 가장 높은 유사도 값(0.80)을 나타낸 것은 청고병에 저항성인 '10BA333'와 '10BA424'이었고, 가장 낮은 유사도 값(0.33)을 나타낸 것은 시들음역병에 내병성인 야생종 L3708(Solanum pimpinelliforium L.)과 청고병에 저항성인 '10BA424'이었다. 유사도 값을 이용하여 UPGMA 분석한 결과, 유사도 0.58를 기준으로 나누었을 때 3개의 군(cluster)으로 분류되었는데, 대부분 동일한 내병성을 지닌 공여친계통 간 유전적 거리가 가까워 이들은 공통된 저항성 재료를 이용한 육성과정에서 파생된 계통일 것이라 판단되었다. 계통수(dendrogram)를 기준으로 유전적 거리가 지나치게 멀지 않으면서 비교적 다수의 회복친 유전자 선발용 SSR 마커의 확보가 가능한 여교배 조합(공여친 ${\times}$ 회복친)은 TYLCV 내병성의 경우 'TYR1' ${\times}$ 'RPL1', 청고병의 경우 '10BA333' 또는 '10BA424' ${\times}$ 'RPL2', 흰가루병의 경우 'KNU12' ${\times}$ 'AV107-4' 또는 'RPL2'로 판단되었다. 시들음역병의 경우 내병성 공여친인 'L3708'은 야생종으로서 모든 회복친 계통들과 유전적 거리가 매우 멀었으며, 적절한 조합은 유사도 값이 0.41이며 계통 간 45개의 다형성 SSR 마커가 선발된 'L3708' ${\times}$ 'AV107-4'로 판단되었다.

• Tuberculosis and Respiratory Diseases
• /
• 제79권4호
• /
• pp.282-288
• /
• 2016

Background: Tuberculosis (TB) is a major health problem, and accurate and rapid diagnosis of multidrug-resistant (MDR) and extended drug-resistant (XDR) TB is important for appropriate treatment. In this study, performances of solid and liquid culture methods were compared with respect to MDR- and XDR-TB isolate recovery and drug susceptibility testing. Methods: Sputum specimens from 304 patients were stained with Ziehl-Neelsen method. Mycobacterium tuberculosis (Mtb) isolates were tested for recovery on $L{\ddot{o}wenstein$-Jensen (LJ) medium and the BacT Alert 3D system. For drug susceptibility testing of Mtb, isolates were evaluated on M-KIT plates and the BacT Alert 3D system. Results: The recovery rates were 94.9% (206/217) and 98.2% (213/217) for LJ medium and the BacT Alert 3D system, respectively (kappa coefficient, 0.884). The rate of drug resistance was 13.4% for at least one or more drugs, 6.0% for MDR-TB and 2.3% for XDR-TB. M-KIT plate and BacT 3D Alert 3D system were comparable in drug susceptibility testing for isoniazid (97.7%; kappa coefficient, 0.905) and rifampin (98.6%; kappa coefficient, 0.907). Antibiotic resistance was observed using M-KIT plates for 24 of the total 29 Mtb isolates (82.8%). Conclusion: The liquid culture system showed greater reduction in the culture period, as compared with LJ medium; however, drug susceptibility testing using M-KIT plates was advantageous for simultaneous testing against multiple drug targets.