• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.1
• /
• pp.117-123
• /
• 2013

By calculating the spectral efficiency of symmetric balance incomplete block design(BIBD) codes satisfying BER=$10^{-9}$, it can be found that ideal BIBD code design with m=2 and various q's is effective when effective power is high($P_{sr}=-10$ dBm). But BIBD code design with q > 2 and various m's can be effective when effective power is low($P_{sr}=-25$ dBm).

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.169-176
• /
• 2003

Genetic algorithm (GA), which has a powerful searching ability and is comparatively easy to use and also to apply, is in the spotlight in the field of the optimization for mechanical systems these days. However, it also contains some problems of slow convergence and low efficiency caused by a huge amount of repetitive computation. To improve the processing efficiency of repetitive computation, some papers have proposed paralleled GA these days. There are some cases that mention the use of gray code or suggest using gray code partially in GA to raise its slow convergence. Gray code is an encoding of numbers so that adjacent numbers have a single digit differing by 1. A binary gray code with n digits corresponds to a hamiltonian path on an n-dimensional hypercube (including direction reversals). The term gray code is open used to refer to a reflected code, or more specifically still, the binary reflected gray code. However, according to proposed reports, gray code GA has lower convergence about 10-20% comparing with binary code GA without presenting any results. This study proposes new Full gray code GA (FGGA) applying a gray code throughout all basic operation fields of GA, which has a good data processing ability to improve the slow convergence of binary code GA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.29-35
• /
• 2008

Very efficient 6-ary runlength-limited codes for a six-level optical recording channel are presented when d = 3. The 6-ary(3, 15) code of rate 6/7 is given achieving coding efficiency of 98.87%. The efficiency of rate 13/15, (3, 20) code is 99.95%, which approaches the Shannon capacity. To increase the accurary of reading 6-ary signal, partial response modes are also investigated.

• Fire Science and Engineering
• /
• v.25 no.1
• /
• pp.1-6
• /
• 2011

An evacuation simulation was carried out to confirm evacuation efficiency for stair width and problems in calculation of occupant load for high-rise buildings. The evacuation time and number of evacuated persons from a 39 story condominium-mercantile building were calculated by using Simulex for stair widths of 1.2 m, 1.5 m, and 1.8 m. The total occupant load based on the Korean code was higher than the number of actual residents by 2.3 times, and that based on the NFPA 101 Life Safety Code by 2.6 times, respectively. For the occupant load based on the Korean code, smaller stair width resulted in lower evacuation efficiencies due to bottlenecks in egress. For the actual residents and NFPA code-based occupant load, a high evacuation efficiency and negligible effects of the stair width on evacuation efficiency were confirmed. It was shown that there was a bottleneck even at the stair width of 1.8 m for the Korean code-based occupants, while the stair width of 1.2 m provided safe egress to the actual residents or NFPA code-based occupants. This recommended further studies on possibility of lowering the level of the Korean code in calculation of the occupant load.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1964-1965
• /
• 2002

This paper reports on the single mode fiber coupling efficiency. There is difference between simulation by CODE-V and theoretical result, we observed CEO which is taken by experiment in lab and found out that CEO taken by CODE-V was closer to real experiment result then theoretical result.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.493-499
• /
• 2011

To improve the bandwidth efficiency of conventional orthogonal modulation, the MCTO(Multi-Code Trans-Orthogonal) modulation, which is modified orthogonal modulation, was proposed. However, the RF(Radio Frequency) power amplifier for the MCTO modulation is too complex to reject the amplitude distortion due to the non-constant amplitude property of the MCTO. Therefore, in this paper, CAMCTO(constant-amplitude multi-code trans-orthogonal) modulation is proposed by using the constant-amplitude encoding algorithm for multi-code signal. Additionally, the performance of the proposed CAMCTO modulation is compared with those of the orthogonal modulation and the MCTO modulation by using the computer simulation. The computer simulations show that the bandwidth efficiency of the proposed CAMCTO modulation is better than that of the conventional orthogonal modulation.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.427-430
• /
• 2005

A multi-code biorthogonal code keying (MBCK) system consists of multiple waveform coding blocks, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude precoding block (CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. The precoding block in CA-MBCK is a redundant waveform coder whose input bits are generated by processing the information bits. Redundant bits of constant amplitude coded CA-MBCK are not only used to make constant amplitude signal but also used to improve the BER performance at the receiver. In this paper, we proposed a transmission scheme which combines CA-MBCK with $Q^2PSK$ modulation to improve bandwidth efficiency of CA-MBCK and also uses chip interleaving to maintain a constant amplitude feature of CA-MBCK. bandwidth efficiency of a proposed transmission scheme is increased fourfold. And the BER performance of the scheme is same as that of CA-MBCK.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.111-114
• /
• 2004

Sensor networks are deployed with a limited energy source. Thus, energy efficient design can be challenging. This paper has been studied optimal packet length with energy efficiency for sensor networks. And using Power Management can not improve energy efficiency. Power Management is turning off transceiver when transceiver is idle statue. We show that BCH code for error control can improve energy efficiency better than Convolutional code.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.123-127
• /
• 2005

The numerical analyses of the complicated flows are widely attempted in these days. Because of the enormous demanding memory and calculation time, parallel processing is used for these problems. In order to obtain calculation efficiency, it is important to choose proper domain decomposition technique and numerical algorithm. In this research we enhanced the efficiency of the CFDS code developed by ADD, using parallel computation and newly developed numerical algorithms. For the huge amount of data transfer between blocks non-blocking method is used, and newly developed data transfer algorithm is used for non-aligned block interface. Recently developed RoeM scheme is adpoted as a spatial difference method, and AF-ADI and LU-SGS methods are used as a time integration method to enhance the convergence of the code. Analyses of the flows around the ONERA M6 wing and the high angle of attack missile configuration are performed to show the efficiency improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.5A
• /
• pp.484-492
• /
• 2006

A multi-code biorthogonal code keying(MBCK) system consists of multiple waveform coding block, and the sum of output codewords is transmitted. Drawback of MBCK is that it requires amplifier with high linearity because its output symbol is multi-level. MBCK with constant amplitude preceding blcok(CA-MBCK) has been proposed, which guarantees sum of orthogonal codes to have constant amplitude. Redundant bits of CA-MBCK for constant amplitude coding are not only used to make constant amplitude signal but also used to improve the bit error rate(BER) performance at receiver. In this paper, we proposed a transmission scheme which combine CA-MBCK with $Q^{2}PSK$ to improve bandwidth efficiency of CA-MBCK. The BER performance of the scheme is same that of CA-MBCK in additive white gaussian noise(AWGN). And we showed that BER performance of the proposed system can be improved using redundant bits of constant amplitude preceding.