• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.7
• /
• pp.1-8
• /
• 2000

In this paper, we introduce a modified interference cancellation scheme for multiuser detection in CDMA(Code Division Multiple Access). This detector uses SIC(Successive Interference Canceller) scheme and divides the received signals to reduce the delay time. In this proposed structure, the active users are divided into a number of groups. Within each group, parallel detection is performed to estimate the output signal of that group. The estimated output signal due to that group is then subtracted from the received signal and the resulting residual signal is used for the parallel detection of the next group. This parallel and serial cancellation process is repeated until the last group in the stage is completed. The estimated output signals due to all groups except -th group are MAI for the user signals in -th group. Therefore, the estimated output signals due to all groups except th group are subtracted from the received signal, and then the obtained signal becomes the input signal of -th SIC. The proposed RDSIC (Reduced Delay time of Successive Interference Canceller) has performance and complexity close to the SIC, but with much less detection delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1321-1327
• /
• 2009

In this paper, as the mobile communication service is widely used and the demand for wireless repeaters is rapidly increasing because of the easiness of extending service areas. But a wireless repeater has a problem the oscillation due to feedback signal. We proposed a new hybrid interference canceller using the adaptive filter with CMA(Constant Modulus Algorithm)-Grouped LMS(Least Mean Square) algorithm in the adaptive interference canceller. The proposed interference canceller has better channel adaptive performance and a lower MSE(Mean Square Error) than conventional structure because it uses the cancellation method of Grouped LMS algorithm. The proposed detector uses the LMS algorithms with two different step size to reduce mean square error and to obtain fast convergence. This structure reduces the number of iterations for the same MSE performance and hardware complexity compared to conventional nonlinear interference canceller.

• Journal of Advanced Navigation Technology
• /
• v.14 no.5
• /
• pp.684-690
• /
• 2010

Recently, the NG(Next Generation) system is studied for supporting convergence of various services and multi mode of single terminal. And a demand of user for taking the various services is getting increased, for supporting these services, many systems being able to transmit a large message have been appeared. In the NG system, it has to be supporting the CDMA and WCDMA besides the tele communication systems using OFDM method with single terminal An intergrated system can be improved with adopting of SoC technique. For adopting SoC technique on the intergrated terminal, we have to solve the non linear problem of HPA(High Power Amplifier). Nonlinear characteristic of HPA distorts both amplitude and phase of transmit signal, this distortion cause deep adjacent channel interference. We adopt a polynomial pre-distortion technique for this problem. In this paper, a noble modem design for NG mobile communication service and a method using polynomial pre-distorter with PAPR technique for counterbalancing nonlinear characteristic of the HPA are proposed.

• The KIPS Transactions:PartC
• /
• v.11C no.6 s.95
• /
• pp.835-842
• /
• 2004

In this paper, we have analyzed the MC-DS/CDMA system with input signal synchronized completely through adjustment of the gain in the PLL loop, by using the hybrid SC/MRC-(2/3) technique, which is said to one of the optimal diversity techniques under the multi-path fading environment, assuming that phase error is defined to the phase difference between the received signal from the multi-path and the reference signal in the PLL of the receiver. Also, assuming that the regarded radio channel model for the mobile communication is subject to the Nakagami-m fading channel, we have developed the expressions and performed the simulation under the consideration of various factor, in the MC/DS-CDMA system with the hybrid SC.MRC-(2/3) diversity method, such as the Nakagami fading index(m), $the\;number\;of\;paths\;(L_p),$ the number of hybrid SC.MRC-(2/3) $diversity\;branches\;(L,\;L_c),$ the number of users (K), the number of subcarriers (U), and the gain in the PLL loop. As a result of the simulation, it has been confirmed that the performance improvement of the system can be achieved by adjusting properly the PLL loop in order for the MC/DS-CDMA system with the hybrid SC/MRC-(2/3) diversity method to receive a fully synchronized signal. And the value of the gain in the PLL loop should exceed 7dB in order for the system to receive the signal with prefect synchronization, even though there might be a slight difference according to the values of the fading index and the spread processing gain of the subcarrier.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.6
• /
• pp.81-91
• /
• 2008

In this study, data collection delay time generated in bus information system is analysed and improvement on system reliability by minimizing the delay time is suggested. To minimize the data collection delay time (call setup time), factors on data collection phase are analyzed. Each connecting time that it occurs from wireless communication during data collection phase, is selected as a main effective variable and a model for selecting an optimum communication point to minimize the effect of data delay time by each connecting time is suggested. In this model, minimization of the point between the time carrying out wireless communication and vehicle moving time, is calculated and the difference between the bus arrival time and information delivered time to the passenger is reduced. The test results for the proposed model in BIS using a CDMA (Code Division Multiple Access) communication show that delay time in real system operation has been improved. The minimum data collection delay time based on optimal communication position leads to the better reliability for Bus Information System. This study can be applied to the selection of optimal communication position and detection position instead of empirical methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.7
• /
• pp.805-814
• /
• 2012

Intermittent or periodic signals with undulating amplitudes of mobile devices cause interference noise at audible frequency to the sound system which is installed nearby. In this regard, it is recently issued that the intermittently transmissions of LTE mobile phones cause the interference noises with sound systems, similar to that of GSM mobile phones. For retaining the immunity to noises, a national regulation KN20 suggests a 1 kHz AM 80 % and a CDMA modulation signal as reference signals for immunity test of sound and television broadcast receiver. In this paper, the effects of interference noises of AM and CDMA are compared with those of GSM and LTE, and the improvement of reference signal for national immunity test of sound systems is suggested. It is recommended to delete the CDMA modulation signal from reference signals for immunity test because it hardly cause interference noise with sound systems. On the other hand, it is desirable to select the modulation signal of LTE instead of CDMA as a reference signal for immunity test of sound system and television broadcast receiver because many people use the LTE service and it is analysed that the LTE signal causes considerable interference noises.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.506-519
• /
• 1999

An adaptive array antennal and a CCI canceller have been considered as techniques for cancelling Multi-User Interference(MUI) in Direct Sequence Code Division Multiple Access(DS-CDMA) system. These techniques have different problems respectively in the process of cancelling MUI as the number of users increases. For that reason, the scheme which can cancel MUI effectively by compensating for the problems of each of the techniques has been required. For the scheme, the technique to connect an adaptive array antenna and a CoChannel Interference(CCI) canceller in cascade form has been studied. In the existing study about the cascade connection method, the effect of cancelling MUI about two interference signals is analyzed, but the analysis for the quantitative BER(Bit Error Rate) improvement according to the number of users is not considered. Therefore, in this paper, we have analyzed the degree of BER performance improvement quantitatively according to the number of users by introducing the receiving system, which connects an adaptive array antenna and a CCI canceller to a DS-CDMA system in cascade form. For the method of analyzing the performance, we have performed the theoretical analysis and the simulation, considering the case of adopting only an adaptive array antenna and of cascade connection respectively, and having compared and analyzed the results. From the results, it is confirmed that in the case of adopting only an adaptive array antenna, the problems occur in the process of cancelling MUI according to the number of users and the receiving direction of interference signals, and can be compensated by the cascade connection method. In conclusion, we have known that MUI is cancelled effectively by using the cascade connection method, and the much better BER performance improvement is obtained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9C
• /
• pp.895-904
• /
• 2007

This paper proposes a robust sub-optimal smart antenna in Code Division Multiple Access (CDMA) basestation. It makes use of the property of the Least Mean Square (LMS) algorithm and the Conjugate Gradient Method (CGM) algorithm for beamforming processes. The weight update takes place at symbol level which follows the PN correlators of receiver module under the assumption that the post correlation desired signal power is far larger than the power of each of the interfering signals. The proposed algorithm is simple and has as low computational load as five times of the number of antenna elements(O(5N)) as a whole per each snapshot. The output Signal to Interference plus Noise Ratio (SINR) of the proposed smart antenna system when the weight vector reaches the steady state has been examined. It has been observed in computer simulations that proposed beamforming algorithm improves the SINR significantly compared to the single antenna case. The convergence property of the weight vector has also been investigated to show that the proposed hybrid algorithm performs better than CGM and LMS during the initial stage of the weight update iteration. The Bit Error Rate (BER) characteristics of the proposed array has also been shown as the processor input Signal to Noise Ratio (SNR) varies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.147-153
• /
• 2009

In this paper, FSS(Frequency Selective Surface) using defect mode characteristic is proposed. The unit cell using defect mode characteristic of the proposed FSS is offered lower resonant frequency in the same cell size. The number of suitable array is optimized 13 by 13. Also, the patch antennas operated in WCDMA(Wideband Code Division Multiple Access) Tx band and Rx band are designed for the comparison. The gain value of proposed FSS-1 complex structure (the patch antenna of Tx band and FSS) is improved 3.3 dB from 9.98 dBi to 13.28 dBi in Tx band. The gain value of proposed FSS-2 complex structure(the patch antenna of Rx band and FSS) is improved 5.53 dB from 9.81 dBi to 15.34 dBi in Rx band. Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $13{\times}13$ array antenna is from 337 MHz(1.87 to 2.21 GHz). The measured radiation gain is 11.39 dBi(1.94 GHz), 13.11 dBi(2.05 GHz), 11.09 dBi(2.14 GHz). The measured radiation efficiency is 81 %. Because the proposed FSS structure has more higher gain, it will be applied to antenna of WCDMA repeater system.