• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.4
• /
• pp.607-614
• /
• 2011

This paper describes the development of pulse code modulation(PCM) data recorder with design, implementation and environmental test. PCM serial data that diverged from telemetry encoder output is used as the input and is reformed to parallel signal through FPGA processing. Controllers construct the packet by the sector and record it into non-volatile memory. Compact flash(CF) memory for data storage media, USB interface for data downloading, and a software for operating status diagnosis and file format conversion are used.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.8-13
• /
• 2007

Unsteady flow simulation for the tiltrotor Smart UAV configuration was performed to investigate the powered rotor wake effect on aerodynamic characteristics. Calculations were performed to simulate various flow conditions based on different flight modes including hover, conversion and cruise. Three-dimensional compressible Navier-Stokes equation code were used for flow calculation and Chimera grid technique overlapping individually generated grids was employed. A dynamic grid method was adopted in simulation of the rotating blades. Flow calculations were also conducted for the un-powered case. Aerodynamic interaction between the rotor and airframe was investigated comparing three data sets from the un-powered, powered, and isolated rotor cases.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2016.10a
• /
• pp.68-70
• /
• 2016

3D 프린터는 연속적인 계층에 특수한 재료를 출력시켜 3차원 물체를 만들어 내는 장치이다. 3D 프린팅을 위해서는 3D 모델을 생성한 후, 이를 3D 프린터에 출력할 수 있도록 G-code로 변환해야 한다. 본 논문에서는 이 변환 작업을 완전 분산 방식으로 처리할 수 있는 알고리즘을 제안한다. 이를 위해 하나의 메인 노드와 N개의 작업 노드로 구성한 시스템에서 2단계에 걸쳐 분할 정복(divide-and-conquer) 방식으로 변환하도록 하였다. 실제 구현한 시스템을 이용하여, 성능에 미치는 요소(모델의 크기 및 정밀도)에 따른 변환 시간의 단축 효과를 보였다.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.5 no.1
• /
• pp.108-115
• /
• 2005

Inherited metabolic diseases (IMD) comprise a large class of genetic diseases involving disorders of metabolism. The majorities are due to defects of single genes that code for enzymes that facilitate conversion of various substances into others. Because of the multiplicity of conditions, many different diagnostic tests are used for screening of IMD. Molecular genetic diagnosis is the detection of pathogenic mutations in DNA and/or RNA samples and is becoming a much more common practice in medicine today. The purpose of molecular genetic testing in IMD includes diagnostic testing, pre-symptomatic testing, carrier screening, prenatal diagnosis, preimplantation testing, and population screening. However, because of the complexity, difficulty in interpreting the result, and the ethical considerations, an understanding of technical, conceptual, and practical aspects of molecular genetic diagnosis is mandatory.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.5
• /
• pp.62-68
• /
• 1985

Recently, because of its pecularity, the Residue Number System has been considerable interest in spacial purpose signal processing. In this paper, a realization of digital filter based on residue properties were considered. To get the residue code directly from the analog input, a direct analog to residue conversion scheme were proposed. Finally error analysis is discussed and scaling error model is established.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.2
• /
• pp.121-129
• /
• 2000

The fuzzy-based SAM algorithm is proposed in this thesis to reduce the idle time. to recover call truncation fast when it is handed off and to last frequency acquisition in the mobile communications. It has additive and adaptive elements. Its weight values are generated not by feedback but by input conversion values. The initial expectation value is defined and forwardㆍbackward searching is executed 4o produce the expectation value of one chip. The fuzzy-based SAM algorithm is applied to the demodulator in CDMA system, and the synchronization time is measured. Synchronization time of PN code is 1.678$\mu\textrm{s}$ by SAM algorithm. It is 993 times faster than time of the conventional systems, 1.667$\mu\textrm{s}$.

• Annual Conference on Human and Language Technology
• /
• 2009.10a
• /
• pp.262-265
• /
• 2009

21세기 세종계획은 국어정보화를 위한 범국가적 사업으로서 국어 기초 자원을 구축하는데 매우 큰 기여를 하였으며, 그 주요 결과물로 배포된 세종 말뭉치는 많은 연구자들에게 꼭 필요한 가치있는 결과물이다. 이처럼 소중한 국어 자원을 실제 연구자들이 활용하고자 할 때 불편함을 느끼는 경우가 있는데 그 이유는 균형 말뭉치의 구축이라는 말뭉치의 특성 및 원문 자료의 내용을 최대한 보존하기 위한 노력의 일환으로 사용자 정의 영역에 정의된 문자들이 다수 포함되어 있기 때문이다. 본 논문에서는 자연언어 처리, 정보검색 분야 연구자들이 세종계획 최종 결과물 중에서 원시 말뭉치를 활용하는데 있어서 말뭉치에 사용된 문자코드의 유형을 중심으로 코드 변환 문제점과 그 해결 방안을 모색하고자 한다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.69-74
• /
• 1999

This paper aims to DNC application of car seat cushion die. DNC systems are consist of CAD(CATIA1, CAM(Z-MASTER, OMEGA) software and CNC milling machine. CAM software is purpose to G-code generation for CNC programming. Then CAM software and CNC milling machine are connect to RS-232-C cable for networking.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.323-326
• /
• 2002

In this paper, we propose a watermarking technique that it is possible to winnow illegal contents from scattered contents on the internet. The identification is performed using an embedded unique content ID by the watermarking technique. The proposed watermarking technique accepts A/D-D/A conversion and a lot of lossy compression such as MP3, AAC, WMA and Real Audio. Watermark robustness is enabled using group quantization, selecting watermark inserting point, and error correction code. Test results show that the correct extraction is about $90\%$ and SNR is above $50\~60dB$. The above figures means that the proposed technique is able to extract encoded information at least one more times per audio and that it is very difficult to discriminate between a watermarked audio and a original audio.

• 유체기계공업학회:학술대회논문집
• /
• 2003.12a
• /
• pp.520-525
• /
• 2003

A numerical investigation was performed to determine the effect of airfoil on the optimum flap height using NACA0015 Wells turbine. The five double flaps which have 0.5% chord height difference were selected. A Wavier-Stokes code, CFX-TASCflow, was used to calculate the flow field of the Wells turbine. The basic feature of the Wells turbine is that even though the cyclic airflow produces oscillating axial forces on the airfoil blades, the tangential force on the rotor is always in the same direction. Geometry used to define the 3-D numerical grid is based upon that of an experimental test rig. This paper tries to analyze the optimum double flap of Wells turbine with the numerical analysis.