• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.2
• /
• pp.13-19
• /
• 2015

Steam generator is one of the most important component of nuclear power plant, and it's integrity and reliability are to be assured to high level by pre-service inspection and in-service inspection. To improve the reliability of steam generator heat exchanger tubes and to secure the management of nuclear power plant safely, KHNP CRI recently has developed eddy current testing system for steam generator. KHNP CRI have performed a series of experimental verification and field application to confirm the performance of the developed ECT system in accordance with ASME Code requirements. The ECT system consists of a remote data acquisition unit, an ECT signal acquisition and analysis software, a water chamber robot controller and a probe push-puller. In this paper, we will details of the developed ECT system and the software and their experimental performance. And also we will report the field applying performance and the issues for further steps.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.912-920
• /
• 2012

In this paper, we propose a new and cost-effective RCP (Rapid Control Prototyping) system based on Matlab/Simulink and a DAQ (Data Acquisition) unit with the high speed USB communication interface. The proposed RCP system has a feature that a computer on which Simulink is running acts as a realtime controller and a DAQ unit performs data acquisition, transmission of the data to and from a computer, and the application of control data received from the computer. For its implementation, we develop 10 communication blocks each of which is constructed by using S-function. In order to increase the data communication speed and thus to reduce the sampling period of the overall control system, we propose to use a batch transfer strategy through the USB interface. The proposed RCP system has several advantages over existing methods such as good maintainability, portability due to the USB interface, low cost, and no necessity for C-code generation even though it can only be applied to control systems with moderate sampling rates. It is expected that the proposed RCP system can be useful in teaching control-related topics to undergraduate and graduate students.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.2
• /
• pp.199-208
• /
• 2014

Code division multiple access (CDMA) is one of the promising medium access control (MAC) schemes for underwater acoustic sensor networks because of its robustness against frequency-selective fading and high frequency-reuse efficiency. As a way of performance evaluation, sea or lake experiment has been employed along with computer simulation.. In this study, we design the underwater CDMA forward-link transceiver and evaluate the feasibility aginst harsh underwater acoustic channel in water-tank first. Then, based on the water-tank experiment results, we improved the transceiver and showed the improvements in a lake experiment. A pseudo random noise code acquisition process is added for phase error correction before decoding the user data by means of a Walsh code in the receiver. Interleaving and convolutional channel coding scheme are also used for performance improvement. Experimental results show that the multiplexed data is recovered by means of demultiplexing at receivers with error-free in case of two users while with less than 15% bit error rate in case of three and four users.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.156-161
• /
• 1992

In this research a monitoring system for turning using NC information and the current of feed motor as a monitoring signal was developed. The overall system consists of modules such as learning process, NC data transmission, generation of forecast information, signal acquisition, monitoring and post process. In the learning process, the reference data and the cutting force equation necessary for monitoring are obtained from the accumulated monitoring results. In the generation of forecast information, the information of forecasted cutting forces is acquired from the cutting force equation and NC program and appended to each NC block as a monitor code. Reliability of monitoring is improved by using the monitor code in the real-time monitoring. Monitoring module is divided into two parts : the off-line monitoring where errors of NC program are checked and the on-line monitoring where the level of motor current is monitored during cutting operations. If the actual current level exceeds the limit value provided by the monitor code in the level monitoring, it is recognized as abnormal. In the event of abnormal status, the post processor sends the emergency stop signal to NC controller to stop the operation. Actual experiments have shown that the developed monitoring system works well.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.598-606
• /
• 2003

In this paper, we analyze the performance of the PCM cell search algorithm proposed for fast cell search of WCDMA systems. In order to improve both performance and complexity of the cell search algorithm standardized for WCDMA systems the PCM scheme uses a group of the polarization codes produced by a Gold code generator. The PCM scheme only uses one synchronization channel since the polarization codes modulated on P-SCH can replace the RS codes of S-SCH. Thus, the PCM reduces the BS's transmission power since only one synchronization channel can be used, and it can also reduce the complexity of receiver as compared with the conventional one. In this paper, by defining a numerical model, we analyze the performance of the PCM cell search algorithm in terms of detection probability and mean acquisition time. Consequently, we could demonstrate that the PCM cell search algorithm is superior to the standard WCDMA cell search algorithm.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.99-104
• /
• 2012

The United States will proceed with the effort to modernize the GPS system, and one of its main content is to provide L5 signal. L5 will be transmitted in a radio band reserved exclusively for aviation safety services. And, L5, in combination with L1, will improve the position accuracy via ionospheric correction and robustness via signal redundancy. However, The acquisition processing time of L5 takes longer than that of L1 as the code length of L5 is 10 times longer than that of L1. To reduce this acquisition processing time, a higher number of correlators in the aquisition module should be used. However, there is a problem that this causes increase in the complexity of the correlator configuration and the computation power. So, in this paper, we propose L5 signal tracking scheme using tracking results in the GPS L1/L5 receiver. The proposed scheme could reduce the hardware complexity as the GPS L5 signal acquisition module is not needed, and provide fast and stable tracking of L5 signal by aiding L1 tracking results such as PRN, the code phase synchronization, and the Doppler frequency. The feasibility of the proposed scheme is demonstrated through simulation results.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.581-584
• /
• 2003

It is important to know phase offsets of PN (Pseudo Noise) sequences in spread spectrum communications since the acquisition is equivalent to make a phase offset between a receiving PN sequence and a PN sequence of local PN generator be identical. In this paper, a phase offset enumeration method for PN sequences with error detection, and its application to the synchronization are proposed. The phase offset enumeration far an n-tuple PN sequence and its error detection are performed when one period of the sequence is received. Once the phase offset of the receiving sequence is calculated, we can easily accomplish the synchronization by initializing shift registers of a local PN generator according to the phase offset value. The mean acquisition time of the proposed synchronization method is derived analytically, and we see that the method acquires very fast acquisition in the high SNR (Signal-to- Noise Ratio) environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.8
• /
• pp.32-41
• /
• 2010

We propose the use of multi-preambles using Gold codes and analyze its performance. The multi-preamble is a way of utilizing different codes for preambles according to operation modes or applications in a system. The receiver can be easily implemented using the maximum likelihood algorithm. The performance is robust against noise due to the good correlation characteristic of the Gold codes. We use 128-bit-long multi-preambles generated by 127 bit Gold codes in deriving the detection error probability and in verifying the validity through computer simulation. The results show that the theory and the experiment are in good agreement within the approximation error.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.1
• /
• pp.172-179
• /
• 2016

The study of Mobile MGIS (Marine Geographic Information System) based on the Android Mobile Platform is mainly performed on effective methodologies which transform real world data to computing world data. Mobile GUI system has its own target on reliable data service by acquisition of geometric information using EFDC (Environmental Fluid Dynamics Code) Model, accurate measurement and graphical visualization. Even simple visualizations can aid in the interpretation of complex hydrodynamic relationships that are frequently encountered in the marine environment. The Mobile MGIS provides an easy way for hydrodynamics geoscientists to construct complex visualizations that can be viewed with free software. This study proposes a Mobile GUI MGIS using EFDC Model result of Seomjin River estuary. Finally, we design a Seomjin River estuarine Coastal Waters Mobile MGIS integrating above data models. It must adds more ecological information and the various service item for approach more easily in order to user.

• Journal of Convergence Society for SMB
• /
• v.5 no.1
• /
• pp.25-30
• /
• 2015

The APT attacks are hackers created a variety of security threats will continue to attack applied to the network of a particular company or organization. It referred to as intelligent sustained attack. After securing your PC after a particular organization's internal staff access to internal server or database through the PC or remove and destroy the confidential information. The APT attack is so large, there are two zero-day attacks and rootkits. APT is a process of penetration attack, search, acquisition, and is divided into outlet Step 4. It was defined in two ways how you can respond to APT through the process. Technical descriptions were divided into ways to delay the attacker's malicious code attacks time and plan for attacks to be detected and removed through.