• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on roan temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge. the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains $(CH_3)$ and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.43-45
• /
• 2005

For application of advanced high strength hot-rolled steels (i.e. DP590, DP780) to automotive lightweight chassis parts, various technologies from design to forming test, optimization of welding condition and investigation of coating properties were tried. The target part of this study was automotive rear sub frame and we could make $16.8\%$ weight reduction by reducing the material thickness and optimizing the design. In addition, the formability and weldability of the newly developed AHSS, DP780, were evaluated.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.266-269
• /
• 2001

This paper investigated the aging characteristic under long-term corona discharge on loon temperature vulcanized silicone rubber, which has been using as a protective coating material for solving the contaminant problem. The applied electrical field is 10kV/cm ac and corona discharge treatment was applied on RTV silicone rubber sheet for maximum 250 hours. With the duration of corona discharge, the diffusible low molecular weight species increased, which was determined the usage of n-hexane extraction method. In addition, the contaminant layer was formed on the treated surface, and then measured the contact angle. We investigated the relation of contact angle and diffusible low molecular weight species. It is found that scissor of main chain PDMS and side chains (CH$_3$) and the generation of LMW species were occurred by a corona discharge. The improvement of hydrophobicity rate is thought due to the increase of diffusible LMW species.

• Korean Journal of Materials Research
• /
• 제3권4호
• /
• pp.372-380
• /
• 1993

In order to improve the oxidative resistance of carbon/carbon composites, aluminium-isopropoxide and aluminium-tri-sec-butoxide sol were coated on the surface of 2D--carbon/carbon composiles and the effects uf coating were investigated. The effects of oxidative resistance were dominant in the case of catalyst/alkoxide mole ratio, 0.07, and $H_2O$/alkoxide mole ratio, 100. Through the dynamic TGA analysis with the heating rate of 20%/min, oxidative initiation tempera~ ture was enhanced about $80^{\circ}C$. The oxidative resistance effects of alkoxide sol were improved according to the times of coating. Also the 20% weight loss time of coated samples by TGA analysis was 20% better than that of un~ coated samples. The thickness of 1^{st} coated layer was about 3${\mu}$m and that of $2^{nd}$ and $3^{nd}$ coated layers was about respectively 4~5${\mu}$m and the weight loss were increased with the increasing of thermal shock test times.

• Korean Journal of Agricultural Science
• /
• 제19권2호
• /
• pp.136-144
• /
• 1992

This study was aimed to extend the marketing period through the postharvest application of fruit coating materials in early cultivar 'Tsugaru' apples. Postharvest application of fruit coating materials were effective on remaining freshness during storage and marketing. Prestorage waxing showed higher flesh firmness and weight loss was greatly reduced after storage. This tendency was continued even after marketing period. While no clear effect of prestorage Prolong application on keeping freshness was found, poststorage application of Prolong appeared to be most effective on the prevention of weight loss and keeping firmness during marketing. Parts of fruit developed $CO_2$ injury - like disorder regardless posthavest treatments but no trial was conducted to examine this disorder in this study. Further study should include to determine the cause of this disorder.

• Applied Chemistry for Engineering
• /
• 제29권6호
• /
• pp.734-739
• /
• 2018

We successfully coated poly(3,4-ethylenedioxythiophene) : poly(styrene sulfonate) (PEDOT : PSS) on CVD graphene by adding poly(vinyl alcohol) (PVA) to PEDOT : PSS. Extensive studies on the wettability of coating solutions and electrical properties of formed films led us to conclude that PVA with 89% of the degree of saponification and the molecular weight of less than $100,000gmol^{-1}$ produced optimum results. Furthermore, the optimum content of PVA was found to be 5% of PEDOT : PSS by the solid weight. The film coated by PEDOT : PSS with PVA on CVD graphene displayed a conspicuous improvement in the surface roughness, adhesive property, bending durability and stability in resistance at $160^{\circ}C$, compared to those of using CVD graphene films.

• Geomechanics and Engineering
• /
• 제18권2호
• /
• pp.179-188
• /
• 2019

This paper presents an experimental study to evaluate the effect of palm oil on the selected basic physical-chemical and geotechnical properties of kaolin. The experimental findings are further compared with literature outcomes investigating similar properties of fine grained soils subjected to contamination by different types of oils. To this end, palm oil was mixed with oven dried kaolin samples-aiding oil's interaction (coating) with dry particles first, in anticipation to emphasize the effect of oil on the properties of kaolin, which would be difficult to achieve otherwise. Oil content was limited to 40% by dry weight of kaolin, supplemented at intervals of 10% from clean kaolin samples. Observations highlight physical particle-to-particle bonding resulting in the formation of pseudo-silt sized clusters due to palm oil's interaction as evinced in the particle size distribution and SEM micrographs. These clusters, aided by water repellency property of the oil coating the kaolin particles, was analyzed to show notable variations in kaolin's consistency-measured as liquid and plastic limits. Furthermore, results from compaction tests indicates contribution of oil's viscosity on the compaction behavior of kaolin - showing decrease in the maximum dry unit weight (${\gamma}_{d,max}$) and optimum moisture content ($w_{opt}$) values with increasing oil contents, while their decrease rates were directly and inversely proportional in ${\gamma}_{d,max}$ and $w_{opt}$ values with oil contents respectively. Comparative study in similar terms, also validates this lower and higher decrease rates in ${\gamma}_{d,max}$ and $w_{opt}$ values of the fine grained soils respectively, when subjected to contamination by oil with higher viscosity.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• 제20권1호
• /
• pp.81-85
• /
• 2011

Recently, the electronic parts are to be thinner plate, smaller size, light weight material and CPU, HDD and DRAM in all the parts have been produced on the basis of the high speed and greater capacity. Also, conventional goods have replaced a LED (Light-Emitting Diode) in lighting products so; such industry devices need to have cooling. To maximize all the performance on the heat-radiated products, the area of heat-radiated parts is required to be cooled for keeping the life time extension and performance of product up. Existing cooling systems are using radiant heat plate of aluminum, brass by extrusion molding, heat pipe or hydro-cooling system for cooling. There is a limitation for bringing the light weight of product, cost reduction, molding of the cooling system. So it is proposed that an alternative way was made for bringing to the cooling system. EP (Engineering Plastic) of low-cost ABS (Acrylonitrile butadiene styrene Resin) and PC (Polycarbonate) was coated with brass and the coating made the radiated heat go up. The performance of radiant heat plate is the similar to the existing part. We have studied experimentally on the radiated heat plate for the light-weight, molding improvement and low-cost. From now on, we are going to develop the way to replace the exiting plate with exterior surface of product as a cooling system.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제43권4호
• /
• pp.214-222
• /
• 1998

These experiments were conducted to investigate water uptake, electrical conductivity, germination percentage, seedling growth, and seedling establishment rate in direct seeding cultivation of rice. The rice seeds of six japonica type varieties were coated with 12 kinds of polymers in a standard concentration of 0.2% using seed coating machine. The water absorption of the polymer-coated seeds under saturation conditions was not different among varieties, and was the highest in kulcel, maltrin, and waterlock on the polymer-coated seeds. The electrical conductivity with waterlock (55.0 $\mu scm^{-1}g^{-1}$) was higher than the control plot (45.6 $\mu scm^{-1}g^{-1}$) and other treatments. The germination of the polymer-coated seeds was 95.9% at control plot, 92.7% at low temperature and 35.7% at high temperature. The total dry weight of seed decreased in the order of low temperature, control plot, and high temperature, and was effective in pvp (polyvinyl pyrrolidone), opadry, and sacrust. The seedling establishment rate in direct seeding cultivation ranged from 74.9 to 81.0% in flooded paddy surface, and ranged from 64.7 to 76.6% in dry paddy. In both cases, it decreased in the order of early, medium and medium-late varieties, but was enhanced in daran 8600, sepirect, and sacrust. According to this study the recommended polymers for direct seeding cultivation of rice are daran 8600, sepirect, and sacrust.

• The Research Journal of the Costume Culture
• /
• 제12권6호
• /
• pp.999-1009
• /
• 2004

Chitin is a derived product from the shell of shrimp or crab. Chitosan, a deacetylated product of chitin, has widely been used in the biomedical sector, food industry, and textile industry. Chitosan exhibits fiber-forming property under certain conditions. Nonwoven fabrics made of chitosan fibers may have diverse applications in the industry. Previous studies have revealed that the dye uptake properties of natural dyestuffs improved by the chitosan pretreatment on the fabric specimens. In this case, fabric specimen is coated with acidic salt form of chitosan, which is different from the pure chitosan, since the coating process employes coating with the acidic solution of the chitosan and subesquent drying. In this study, chitosan nonwoven fabric samples were prepared from chitosan sample having deacetylation degree of $100\%$ and molecular weight of 650,000. Chitosan nonwoven fabrics maintain the form of $-NH_2$ end-group. These in turn exhibit higher dye uptake ability than the fabrics coated with chitosan acidic solutions do.