Heat Radiation of LED Light using eu Plating Engineering Plastic Heat Sink

동도금 EP방열판에 의한 소형LED조명등 방열

  • 조영태 (전주대학교 생산디자인공학과)
  • Received : 2010.12.14
  • Accepted : 2011.01.12
  • Published : 2011.02.15

Abstract

Recently, the electronic parts are to be thinner plate, smaller size, light weight material and CPU, HDD and DRAM in all the parts have been produced on the basis of the high speed and greater capacity. Also, conventional goods have replaced a LED (Light-Emitting Diode) in lighting products so; such industry devices need to have cooling. To maximize all the performance on the heat-radiated products, the area of heat-radiated parts is required to be cooled for keeping the life time extension and performance of product up. Existing cooling systems are using radiant heat plate of aluminum, brass by extrusion molding, heat pipe or hydro-cooling system for cooling. There is a limitation for bringing the light weight of product, cost reduction, molding of the cooling system. So it is proposed that an alternative way was made for bringing to the cooling system. EP (Engineering Plastic) of low-cost ABS (Acrylonitrile butadiene styrene Resin) and PC (Polycarbonate) was coated with brass and the coating made the radiated heat go up. The performance of radiant heat plate is the similar to the existing part. We have studied experimentally on the radiated heat plate for the light-weight, molding improvement and low-cost. From now on, we are going to develop the way to replace the exiting plate with exterior surface of product as a cooling system.

Keywords

References

  1. Yoo, J. Y., April 2005, Patent technology Trends of LED Heat Radiation Technology, IOD Report, KISTI.
  2. Kim, G. H., Yoon, G. S., Heo, Y. M., Jung, D. S., and Cho, M. W., 2008, "A Study on the Micro-cutting Process Characteristics of Copper for Manufacturing a Subminiature Radiation Plate", Proceedings of the KSMTE Spring Conference 2008, pp.296-301.
  3. Lee, K. Y., 2007, A Study on the Performance ,Enhancement of Heat Sink Using Heat Pipe, A Thesis for a Master, Pukyong National University Republic of Korea.
  4. Bruce S., October 2003, Technologies that Deserve to Die, MIT's Technology Review.
  5. Light Emitting Diodes(LEDs) for General Illumination, OIDA Technology Roadmap 2002.
  6. LED Lighting Technology Lessons from the USA, Report of a global watch mission March 2006.
  7. Hu, J., Yang, L., and Shin, M. W., 2008, "Electrical, Optical, and Thermal Degradation of High Power GaN/InGaN Light-Emitting Diodes", Journal of Physics D: Applied Physics, Vol. 41, no.3, pp. 035107-035111. https://doi.org/10.1088/0022-3727/41/3/035107
  8. Narendran, N., and Gu, Y., 2005, "Life of LED-based White Light Sources", Journal of Display Technology, Vol.1, No. 1, pp. 167-170. https://doi.org/10.1109/JDT.2005.852510