• BMB Reports
• /
• v.30 no.5
• /
• pp.326-331
• /
• 1997

To construct a competitive ELISA standard curve for the detection of glucose-6-phosphate debydrogenase (G6PD), we used highly purified native G6PD (nG6PD) as both immobilized and soluble antigens and anti-G6PD serum raised against nG6PD as antibody. The polystyrene cuvettes coated with nG6PD were challenged with a mixture of a limiting amount of anti-G6PD serum and various doses of nG6PD as competitors followed by incubation with alkaline phosphatase-anti-IgG conjugate. The competitive ELISA did not exhibit the typical sigmoidal dose-response curve characteristic of competition immunoassays under the optimal concentrations of antigen and antibody. The soluble nG6PD used as competitor failed to effectively inhibit the binding of antibodies to the immobilized nG6PD. The addition of NADP, a cofactor of G6PD enzyme, to coating buffer used for immobilizing nG6PD to the cuvettes and PBS-Tween-BSA buffer for diluting competitors did not improve the inhibition of antibody binding to immobilized nG6PD by soluble n/G6PD. The addition of BSA to coating buffer did not increase inhibition, either. Surprisingly, when partially active G6PD (paG6PD), obtained by repeated freeze-thawing, was used as competitor, the antibody binding to either immobilized nG6PD or immobilized paG6PD was inhibited 49-58%. We conclude that an effective competitive ELISA system with nG6PD enzyme and anti-G6PD serum for the detection of G6PD may not be established due to the poor inhibition of antibody binding to immobilized nG6PD by soluble nG6PD under the present assay conditions and that the inhibition may be improved by using an inactivated enzyme as competitor regardless of the type of immobilized antigen used. These results imply that the immobilized nG6PD may undergo denaturation upon binding to the polystyrene cuvettes and that our anti-G6PD serum may recognize denatured enzyme better than active enzyme.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.323-329
• /
• 1997

Ipriflavone is non-hormonal antiosteoporotic drug which inhibits bone resorption by reducing recruitment and/or differentiation of osteoclasts, and stimulates proliferation and differentiation of osteoblast, and also enhances calcitonin secretion in the presence of estrogen. Although some kinds of immediately-released preparation of ipriflavone are available in commercial market, in present study, we tried to formulate sustained-release tablet using coating method with hydrophobic and hydrophilic coating materials. In vitro dissolution test was applied to evaluate sustained-release patterns of several test preparations (Test tablet A, B and C) designed using different preparation method or different compositions. From the results of dissolution test, test tablet A which showed suitable dissolution profile was selected as the candidate of new product. Pharmacokinetic evaluation of test drug, ipriflavone sustained-release tablets, was conducted in 6 beagle dogs weighing $11.5{\pm}0.5\;Kg$ compared with $Theobon^{\circledR}$ tablet, immediately-released tablet (Kukjae Pharm. Co.) as reference drug. Two products were randomly administered to 6 beagle dogs, and after 1 week, cross-over study was conducted. From the present study, AUC and $T_{max}$ of test product were significantly different from those of reference product (p<0.05), respectively$(AUC\;:\;3646.28{\pm}472.56\;vs\;3646.28{\pm}472.56\;ng{\cdot}hr/ml,\;T_{max}\;:\;4.33{\pm}1.03\;vs\;1.42{\pm}0.38\;hr)$. But $C_{max}$ was not significantly different between two products (p>0.05) $(\;512.52{\pm}48.18\;vs\;443.97{\pm}140.53\;ng/ml)$. From the results of pharmacokinetic evaluations, it was noted that absorption amount of test product was increased, but absorption rate was delayed and $C_{max}$ of two products were not changed. And it was concluded that redesign of the sustained-release preparation which has a lower content of iprifavone rather than test tablet A must be considered.

• Journal of Conservation Science
• /
• v.32 no.2
• /
• pp.109-121
• /
• 2016

Mother-of-pearl turtle shell lacquerware refers to a decoration made of a mother-of-pearl, a turtle shell and metal wires. This lacquerware features bright color tone as it is produced by sprinkling metal powder over its entire surface. This study aimed to find out its material properties and characteristics by using an optical microscopy and conducting a SEM-EDS analysis on the cross section of lacquer coating. As a result, it was found that charcoal powder and soil powder were mixed for undercoating. Then a mixture of cinnabar lacquer and monoclinic arsenic sulfide mineral ($As_2S_3$) was coated on the undercoating and brass powder was sprinkled on top of it. Especially, a little amount of pigment was found on the lacquer layer, which is distinguished from the colors used for conventional lacquer patterns. In addition, it was also found that the cinnabar lacquer and monoclinic arsenic sulfide mineral were mixed together.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.405-409
• /
• 2010

New sol-gel precursors having the ability to protect iron against corrosion were synthesized and used to prepare organic-inorganic hybrid coatings based on epoxy. Bisphenol A epoxy was modified with 3-isocyanatopropyltriethoxysilane to improve the compatibility, and water and HCl were used as catalysts for sol-gel process. Various coating formulations were prepared depending on the type of sol-gel precursors and the amount of each ingredient, and cast on iron substrates by dip-coating and thermally cured. Corrosion protection properties of coated iron were studied by a salt spray test and electrochemical impedance spectroscopy under 0.1 M NaCl electrolyte. Hybrid coatings containing anticorrosive functional group exhibited excellent corrosion protection on iron, compared to that of typical hybrid coatings. From electrochemical impedance spectroscopy, the hybrid coatings containing anticorrosive functional group could maintaine the initial impedance after 500 h, while the impedance of hybrid coatings without them started to decrease after 24 h.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.6
• /
• pp.256-260
• /
• 2014

This study was carried on the phenomena in reactivity with the clay surface according to the thickness of the cobalt component coating. In the coated specimen, it was observed that the cobalt component was spreaded to diffuse with a constant thickness from the surface of it and the diffusion layer at the white porcelain soil was more increased with the increase of the amount of cobalt sulfate than at the celadon porcelain one. It was evaluated that the color of the surface on the coated specimen at the white porcelain soil was changed from grayish blue to blue and the $L^*$ value was decreased from 51.78 to 37.61 and also in the case of the coated specimen in celadon porcelain soil, $L^*$ value was from 53.91 to 38.93 and the color was from dark olive gray to dark gray. The physical properties of the specimen were characterized by X-ray diffraction, Scanning electron microscope, Dilatometer, TG-DTA, UV-vis spectrophotometer and HRDPM.

• Journal of Electrochemical Science and Technology
• /
• v.4 no.3
• /
• pp.113-118
• /
• 2013

Fluorophosphate, $Na_2MnPO_4F$ as new cathode material was synthesized by carbothermal treatment method. Prepared $Na_2MnPO_4F$ has particle size under 100 nm and residual carbon exists in surface of $Na_2MnPO_4F$. Additional carbon coating was performed in order to increase the electrochemical properties. Even capacity and overpotential were improved by carbon coating using mechanical ball milling, the reduced crystallinity limited the drastic improvement of the electrochemical properties. To solve this problem, re-heat treatment was involved to recover crystallinity and then notable improvement of electrochemical properties was obtained. Specific amount of $Li^+$ that participates in electrochemical $Li^+$ insertion / extraction reaction, was x = 1 in $Li_xNa_{2-x}MnPO_4F$ within the voltage range of 2.0 to 4.8 V. The doubled capacity by 2 electron reaction can be obtained when NMPF is charged to higher voltage over 4.8 V.

• Food Science of Animal Resources
• /
• v.30 no.4
• /
• pp.661-668
• /
• 2010

This study was carried out to optimize microencapsulation conditions for Inonotus obliquus extract powder with mediumchain triacylglycerol (MCT) using response surface methodology (RSM), and to determine the possibility of adding encapsulated I. obliquus extract to milk toward improving the functionality of milk. and to investigate the effects of added encapsulated I. obliquus extract on the physicochemical and sensory properties of the product. The microencapsulation efficiency of I. obliquus extract powder was investigated with respect to three variables (ratios of core material to coating material, amounts of water added, and spray pressure) in RSM. The optimal conditions for microencapsulation of I. obliquus extract powder were obtained from the ratio of core material to coating material (2.92:10) and the amount of water added (0.5 mL); the spray pressure had an insignificant effect on the microencapsulation (p<0.05). Adding encapsulated I. obliquus extract into milk did not significantly affect either color (L, a and b values) or thiobarbituric acid (TBA) values. Sensory test revealed that there were significant improvements in brownish, herb flavor, and bitterness scores for encapsulated I. obliquus extract-added milk as compared with those for uncapsulated I. obliquus extract-added milk. Based on the data obtained from the present study, it is concluded that microcapsules of I. obliquus extract powder could be applicable to milk without remarkably adverse effects on physicochemical and sensory properties

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.15 no.3
• /
• pp.160-165
• /
• 2005

Schools have significant and serious indoor environmental health problem, of which indoor air quality (IAQ) in school building may affect the health of the students and indirectly affect learning performance. Schools are of special concern when regarding indoor exposure to air pollutants, because students are particularly sensitive to pollutants and spend a significant amount of time in that environment. Therefore researches for improvement of indoor air quality have been developed such as installation of air cleaning device, ventilation system, titanium dioxide(TiO2) coating and so on. However, it is difficult to evaluate the magnitude of improvement of indoor air quality in field study because indoor air quality can be affected by source generation, outdoor air level, ventilation, decay by reaction, temperature, humidity, mixing condition and so on. In this study, evaluation of reduction of formaldehyde emission rate in school indoor environments by far-Infrared ray coating material was carried out using mass balance model in indoor environment. we proposed the evaluation method of magnitude of improvement in indoor air quality, considering outdoor level and ventilation. Since simple indoor concentration measurements could not properly evaluate the indoor air quality, outdoor level and ventilation should be considered when evaluate the indoor air quality.

• Fashion & Textile Research Journal
• /
• v.22 no.2
• /
• pp.233-239
• /
• 2020

We proposed a simple process of fabricating electroconductive textiles by coating conductive polymer PEDOT:PSS (Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)) on biocompatible PLA (Poly Lactic Acid) nanofiber web for application to smart healthcare. Electroconductive textiles were obtained by a drop-coating process using different amounts of PEDOT:PSS solutions., DMSO (dimethyl sulfoxide) was then used as an additive in the post-treatment process to improve conductivity. The surface morphology of the specimens was observed by FE-SEM. The chemical structures of the specimens were characterized using FTIR. The electrical properties (linear and sheet resistance) of the specimens were measured. The effect of the bending angles on the electrical properties was also investigated to confirm their applicability as wearable smart textiles. FE-SEM and FTIR analysis confirmed that the deposition of PEDOT:PSS on the PLA nanofiber web surface was successful. The conductivity of the PEDOT:PSS/PLA nanofiber web was enhanced up to 1.5 ml with an increasing amount of PEDOT:PSS solutions, but there was no significant difference at 2.0 ml. The optimum condition of PEDOT:PSS deposition was established to 1.5 ml. Even when the specimen coated with 1.5 ml was bent every 30°, the change in the electrical resistance values was still low within 3.7 Ω. It confirmed that stable electrical performance was maintained and proved the applicability as a flexible textile sensor.

• Journal of Welding and Joining
• /
• v.2 no.1
• /
• pp.30-40
• /
• 1984

Moisture content in the coating of an electrode is known to cause defects such as porosities, fish eyes and cracks in the weld metal, however, quantitative relationship between them is not clearly understood. In this study widely consumed and the most common type of arc welding rods such as ilmenite and low hydrogen type were chosen for the investigation, and attempts were made to correlate the relationship between the mechanical properties and gas contents when welding was carried out with electrodes of various moisture contents. As the relative humidity changed from 70% to 92%, it was determined that moisture content to reach saturation was in the range of 0.6~6.8%. As the moisture content in the electrode coating was increased, the amount of gaseous components (H, O, N) in the weld metal was accordingly increased, especially diffusible hydrogen showed prominent effect, i.e. it increased proportionally to the increase of the moisture content. The mechanical properties of the weld metal was observed to become more inferior as the diffusible hydrogen was greater. It was determined for ilmenite type of electrode that the increase of hydrogen content was approximately 1.8ml per unit weight percent increase of moisture and also tensile strength resulted lowering from $45.3kg/\textrm{mm}^2$ to $42.7kg/\textrm{mm}^2$ as moisture content increased from 0.7% to 6.8%. For low hydrogen type the increase of the hyrogen was about 2.4ml per unit percent of moisture and tensile strength decreased from $63.0kg/\textrm{mm}^2$ to $53.8kg/\textrm{mm}^2$ particularly in the region of moisture content 0.1~4.2%.