• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.57-70
• /
• 2005

Chitosan pre-treatment of the fabrics prior to the dyeing processes has been reported to increase the uptake of natural dyestuffs. In this study, cotton, nylon, and PET fabric specimens were pre-treated with chitosan prior to the dyeing (Method 1), or the state of chitosan acid salt formation, coated on the yarn surface, was destroyed prior to the dyeing process by alkaline neutralization process (Method 2). In case of the acid salt formed cotton (Method 1), treated fabrics showed more yellowish color component of cochineal, while alkali-treated (Method 2) cotton showed more uptake of bluish color of cochineal.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.71-83
• /
• 2005

In this study, we reviewed the color changes accompanying the laundering, wash fastness, and abrasion fastness of chitosan-treated cochineal-dyed fabrics. The treatment methods were classified into two based on the chitosan treatment: (Method 1): fabric specimens were pre-treated with chitosan prior to the dyeing procedure in salt form. (Method 2): the state of chitosan acid salt formation, coated on the yarn surface, was destroyed and neutralized prior to the dyeing process. The changes in the chitosan treatment methods bear more important meaning in view of the durability. In Method 1, it is highly likely for the chitosan to be detached from the surface by water during laundering since the chitosan is coated as acid salt state. In Method 2, the resistance d the chitosan to water was supposed to revive since the chitosan would return to its original state. Differences in the resistance of the chitosan treatrrent, however, according to the Method 1 and Method 2, fell short of our expectations. In Method 2, the wash fastness did not improve as we expected since the bond between the fibers comprising fabric specimens and the chitosan is not high even if the chitosan itself has high resistance to water.

• Nano
• /
• v.13 no.12
• /
• pp.1850146.1-1850146.9
• /
• 2018

The rapid development of smart textiles requires the large-scale fabrication of conductive fibers. In this study, we develop a simple, scalable and low-cost capillary-driven self-assembly method to prepare conductive fibers with uniform morphology, high conductivity and good mechanical strength. Fiber-shaped flexible and stretchable conductors are obtained by coating highly conductive and flexible silver nanowires (Ag NWs) on the surfaces of yarn and PDMS fibers through evaporation-induced flow and capillary-driven self-assembly, which is proven by the in situ optical microscopic observation. The density of Ag NWs and linear resistance of the conductive fibers could be regulated by tuning the assembly cycles. A linear resistance of $1.4{\Omega}/cm$ could be achieved for the Ag NWs-coated nylon, which increases only 8% after 200 bending cycle, demonstrating high flexibility and mechanical stability. The flexible and stretchable conductive fibers have great potential for the application in wearable devices.

• Journal of Fashion Business
• /
• v.21 no.4
• /
• pp.34-43
• /
• 2017

Paperweave wallcoveing is necessary to develop new designs based on the analysis of global trend and reflection of Korean traditional image to improve commercial value in the worldwide market. The purpose of this study was to understand design trend and share valuable data by product analyzing of major paperweave wallcovering brands - Yeomyung (Korea), Phillip Jeffries (USA) and Omexco (Belgium). In the dominant color, the largest proportion is YR. Analysis of each brand color, Omexco is using the widest range of colors, the colors of each brand uses an exclusive of its own brand compared to other brands are Green (Yeomyung), Blue (Phillip Jeffries), Red (Omexco). The number of colors, Yeomyung and Philip Jeffries have a high ratio of bi-color, Omexco is revealing various color expression methods such as 55% solid color, two or three multi-color are each half of the balance. Analysis of weaving, Yeomyung has a high ratio of balanced plain, at number of mixture, Yeomyung and Phillip Jeffries are using mostly paper-yarn but Omexco is using multi-mixture materials in some part of theirs. Regarding analysis of finishing, all three brands are mostly selling unfinished paperweave wallcovering but some solid coated are appearing at Yeomyung and Omexco. Yeomyung has more foil transfer compared with the other brands, Phillip Jeffries has some digital printed products.

• Journal of Fashion Business
• /
• v.21 no.2
• /
• pp.78-90
• /
• 2017

In this study, brassiere prototype was developed for attaching the measuring module of ECG measurement and body movement while sleeping. For ECG measurement, textile electrodes was made of stretch fabric containing polyurethane in consideration of elasticity of brassiere band. It was used as a conductive yarn by silver coating on the warp. The textile electrodes was woven with twisted twill to increase the density of conductive yarns. The pressure of the brassiere band was enough to sensing stably the ECG, and the elastic band of the brassiere was designed to be wider than 3cm to install the textile electrodes inside, so that textile electrodes was close fitting to the skin at a constant pressure without lifting. The textile electrodes coated with silicon on rear was attached to brassiere elastic band, and the module was installed with a snap connector to textile electrodes of brassiere band. The module was suitable to monitering ECG measurement of a typical R peak, pulse rate and body movement while sleeping without interfering.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.45 no.4
• /
• pp.674-684
• /
• 2021

Recent advances in electronic technology have engendered a need for research on the use of smart materials in clothing. Electro-conductive fibers are expected to be a crucial element of wearable devices. Therefore, in this study, we have attempted to develop electro-conductive threads and cables using silver nanowires. Based on the characteristics of silver nanowire, in which electro-conductivity can be imparted via heat treatment, we prepared conductive threads by coating nylon yarn with silver nanowires and curing at temperatures of 140℃, 150℃, and 160℃. Conductive threads cured at 140℃ had the highest conductivity, followed by threads cured at 160℃ and 150℃ respectively. The order of the electrical conductivity of the threads after tensile testing was consistent with the original order of the conductivity of the threads. When we evaluated the sensing performance of electro-conductive cables fabricated from these threads, the cables manufactured from threads cured at 140℃ and 160℃ were found to function normally within temperature and humidity sensors. All the cables operated normally in illuminance and electrocardiogram sensors. Thus, we believe that threads made of silver nanowire have sufficient electrical conductivity to be utilized as wearable sensors.

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.247-258
• /
• 2008

This paper is concerned with the long-term performance of geo-textile (GT) composites in terms of creep deformation and frictional properties. Composites of PVA GT and HDPE GM were made to investigate the advanced properties of long-term performance related to waste landfill applications. The same experiments were also performed for typical polypropylene and polyester GT and compared to PVA GT/HDPE GM composites. We also develop high performance GT composites with GM by using PVA GT, which is capable of improving the frictional properties and thus enhances long-term performance of GT composites. Experimental study reveals that the friction coefficient of GT composites is relatively large compared with those of polyester and polypropylene non-woven GT as long as the friction media has similar size to the particles of domestic standard earth. In addition, the geo-composites bonded with geo-grid by a chemical process were investigated experimentally in terms of strain evaluation and creep response values. Geo-grid plays an important role as a reinforcing material. Three kinds of geo-grid were prepared as strong yarn polyester and they were woven type, non-woven type, and wrap knitted type. The sample geo-grids were then coated with PVC. The rib tensile strength tests were conducted to evaluate geo-grid products in terms of tensile strength with regard to single rib. The test was performed according to GRI-GGI. It was concluded again from the experiments that the tensile and creep strains of the geo-grid showed such stable values that the geo-grid prepared in this study could protect geo-textile partially in practical structures.

• Textile Coloration and Finishing
• /
• v.34 no.2
• /
• pp.109-116
• /
• 2022

Tire codes are made of materials such as hemp, cotton, rayon, nylon, steel, polyester, glass, and aramid are fiber reinforcement materials that go inside rubber to increase durability, driveability, and stability of vehicle tires. The reinforcement of the tire cord may construct a composite material using tires such as automobiles, trucks, aircraft, bicycles, and fibrous materials such as electric belts and hoses as reinforcement materials. Therefore, it is essential to ensure that the adhesive force between the rubber and the reinforced fiber exhibits the desired physical properties in the rubber composite material made of a rubber matrix with reinforced fibers. This study is a study on the heat treatment conditions for improving the adhesion strength of the tire cord and the reinforced fiber for tires. The core technology of the drying process is a uniform drying technology, which has a great influence on the quality of the reinforcement. Therefore, the uniform airflow distribution is determined by the geometry and operating conditions of the dryer. Therefore, this study carried out a numerical analysis of the shape of a drying nozzle for improving the performance of hot air drying in a dryer used for drying the coated reinforced fibers. In addition, the flow characteristics were examined through numerical analysis of the study on the change in the shape of the chamber affecting drying.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.4
• /
• pp.261-283
• /
• 2023

This study aimed to review the performance stability of PET (Polyethylene terephthalate) fiber reinforcing materials among the synthetic fiber types for which the application of performance reinforcing materials to fiber-reinforced concrete is being reviewed by examining short-term and long-term performance changes. To this end, the residual performance was analyzed after exposing the PET fiber to an acid/alkali environment, and the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture by age were analyzed, and the surface of the PET fiber collected from the concrete specimen was examined using a scanning microscope (SEM). The changes in were analyzed. As a result of the acid/alkali environment exposure test of PET fiber, the strength retention rate was 83.4~96.4% in acidic environment and 42.4~97.9% in alkaline environment. It was confirmed that the strength retention rate of the fiber itself significantly decreased when exposed to high-temperature strong alkali conditions, and the strength retention rate increased in the finished yarn coated with epoxy. In the test results of the flexural strength and equivalent flexural strength of the PET fiber-reinforced concrete mixture, no reduction in flexural strength was found, and the equivalent flexural strength result also did not show any degradation in performance as a fiber reinforcement. Even in the SEM analysis results, no surface damage or cross-sectional change of the PET reinforcing fibers was observed. These results mean that no damage or cross-section reduction of PET reinforcing fibers occurs in cement concrete environments even when fiber-reinforced concrete is exposed to high temperatures in the early stage or depending on age, and the strength of PET fibers decreases in cement concrete environments. The impact is judged to be of no concern. As the flexural strength and equivalent flexural strength according to age were also stably expressed, it could be seen that performance degradation due to hydrolysis, which is a concern due to the use of PET fiber reinforcing materials, did not occur, and it was confirmed that stable residual strength retention characteristics were exhibited.