• 한국수산과학회지
• /
• 제35권4호
• /
• pp.356-365
• /
• 2002

One of the most important factors that cause eutrophication is nutrient materials containing nitrogen and phosphorus which stem from excreation of terrestial sources and release from sediment. Therefore, to improve water quality, the reduction of these nutrients loads should be indispensible. At this study, the three-dimensional numerical hydrodynamic and ecosystem model, which was developed by Institute for Resources and Environment of Japan, were applied to analyze the processes affecting the eutrophication. The residual currents, which were obtained by integrating the simulated tidal currents over 1 tidal cycle, showed the presence of a typical counterclockwise eddies between Gyewha and Garyuk island. Density driven currents were generated westward at surface and eastward at the bottom in Saemankeum area where the fresh waters are flowing into, The ecosystem model was calibrated with the data surveyed in the field of the study area in annual average. The simulated results were fairly good coincided with the observed values within relative error of $30\%$. The simulations of DIN and DIP concentrations were performed using ecosystem model under the conditions of $40\~100\%$ pollution load reductions from pollution sources. In study area, concentration of DIN and DIP were reduced to $59\%$ and $28\%$ in case of the $80\%$ reduction of the input loads from fresh water respectively. But pollution loads from sediment had hardly affected DIN and DIP concentration, The $95\%$ input load abatement is necessary to meet the DIN and DIP concentration of second grade of ocean water quality criteria.

• 수산경영론집
• /
• 제24권2호
• /
• pp.17-53
• /
• 1993

Pusan is the largest fishing port in Korea, and deals with more than I million ton of fish catches annually, including catches of coastal and off-shore fisheries as well as those of deep-sea fishery. However, it hen had no fishing port facilities specialized fer deep-sea fishery since it started 30 years ago. Economic and physical losses resulting from this have teen enormous. Although fishing port facilities are a part of infra-structures built by Governments, the construction of them has been delayed due to financial difficulties of Central or local governments. To overcome this harsh situation to which deep-sea fishery cooperations faced, some cooperations have decided to construct fishing port facilities including fish-pier specialized for deep-sea fishery in Gamcheon port. The construction expenses of these facilities were financed by private funds to which they themselves jointly contributed. As a result, a fish-[pier, which has the capacity of serving one fishing vessel of 10, 000 ton or four of 5, 000 ton or four of 1, 000 ton at the same time, will be opened in here by 1994. The paper examines the master plan to revitalize the deep-sea fisheries industry in a deep depression with the opening of these physical facilities. The framwork of the plan is pursued in two different aspects, which are both hardware and software. In a hardware aspect, the plan in to develop Pusan into a city which is suitable for one of the best fishing ports in the world. That is, it is to develop the city into a place famous for sightseeing as well as the distribution and processing of fish-products centering around fish-piers. On the other hand, in a software aspet, it is regarding improvement of the distribution system of fish-products. One way to do that is to make up some deficiencies of the current system of a producers' joint sale. And the other is to establish an exchange of fish-products futures. Through these institutions, we could abrsorb speculative funds, which would otherwise be invested in speculation on fish-products, into productive investment opportunities, We believe that if the plan is realized, the deep-sea fishery in Korea will revive from a long-tasted depression and make progress to become one of the mai industries of Korea.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2001년도 춘계학술대회 논문집
• /
• pp.180-185
• /
• 2001

In order to regulate the physical characteristics of an ocean dumping material in the south-eastern East Sea, the diffusion characteristics with the observation, hydraulic experiment and numerical experiment data are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East Sea, the ocean dumping area had influenced the Tsushima warm current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913${\times}$10$^{7}$ $\textrm{cm}^2$/sec by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0∼2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffustion must be regard the pycnocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219${\times}$10$^{-8}$∼8,874${\times}$10$^{-4}$ $\textrm{cm}^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity. (4) From the result of diffusion simulation in the East Sea, the co-concentration line of 0.05 ppm and 0.1 ppm are limited at dumping area after 200 days. The constant concentration line of 0.01 ppm is distributed to the vicinity of Ulleungdo and Tokdo, but isn't distributed to the coastal area of East Sea and southern area of Jung in the East Sea.

• 대한지리학회지
• /
• 제46권6호
• /
• pp.693-706
• /
• 2011

본 연구는 경상북도 영덕군 동해안의 송천 하구 사주를 대상으로, 지형의 형태적 특성과 형성 시기를 파악하고, 장기적 및 단기적인 하구 사주의 변화 과정과 원인을 분석하였다. 사주의 해안선 부근 모래는 남에서 북으로 갈수록 입도가 점차 감소하여, 파랑과 연안류가 대체로 북쪽으로 이동하는 경향이 강한 것으로 보인다. 하구 사주와 인근 해안사구 모래의 절대연대는 약 100년 이내로서 지형의 변화가 매우 심하였다. 하구 사주 내의 입수구는 1971년부터 1995년까지 사주의 남쪽에 위치하였으나, 1995년부터 현재까지는 사주의 북쪽이나 중앙에 나타나고 있는데, 그 원인은 2000년 이후 바람과 해류의 북류 경향이 뚜렷해지면서 파랑과 연안류의 이동 방향이 변화된 결과로 판단된다. 단기적으로 볼 때, 주로 9월부터 3월 사이에 파랑과 바람의 작용으로 퇴적작용이 우세하여 사주의 고도가 상승하고 면적이 넓어지며 지형 기복이 단순해지고, 입수구의 위치와 사주의 형태 변화가 크게 나타났다.

• 안보군사학연구
• /
• 통권8호
• /
• pp.351-381
• /
• 2010

Established on February 1st, 2010, The ROKN maritime task flotilla has a goal to successfully cope with North Korea and other potential threats. Unlike precedents of its kind, The ROKN maritime task flotilla is expected to concentrate more an far-sea strategies than coastal strategies. In such circumstances however, the existing maritime logistics systems have limitations upon which to utterly support the operation conception of the ROKN maritime task flotilla seven. To ensure it's efficiency, transformation of the systems is prerequisite. The purpose of this study is to deduce an adequate maritime logistics system for the ROKN maritime task flotilla by evaluating the limitation of the current system and foreseeing its performance necessary abilities to operate in the future. In order to do this, the study presented problems and the direction of development on the structural and behavioral sides. Fist, regarding problems in the structure of maritime logistics system, the investigation pronounced the need of improvement in mobile logistics support ability and its speed. In addition, for the behavioral side, the need of improvement in logistics cooperation system and self-maintenance ability was affirmed. For the development of an adequate maritime logistics system, the study suggested the amelioration in the operation of an adequate mobile logistics support platform and the speed of the logistics using high-speed transportation such as planes for the structural side. Moreover, for the behavioral side, it recommended th enhancement of logistics cooperation system including the nations that already imported th weapon system, amelioration of self-maintenance ability, and necessity to operate mobile maintenance group.

• 대한조선학회논문집
• /
• 제56권6호
• /
• pp.480-487
• /
• 2019

Ship route planning is to find a route to minimize voyage time and/or fuel consumption in a given sea state. Unlike previous studies, this study proposes an optimization method for the route planning to avoid the grounding risk near the coast. The route waypoints were searched using A^* algorithm, and the route simplification was performed to remove redundant waypoints using Douglas-Peucker algorithm. The optimization was performed to minimize fuel consumption by setting the optimization design parameters to the engine rpm. The sea state factors such as wind, wave, and current are also considered for route planning. We propose the constraint to avoid ground risk by using under keel clearance obtained from electoronic navigational chart. The proposed method was applied to find the optimal route between Mokpo and Jeju. The result showed that the proposed method suggests the optimal route that minimizes fuel consumption.

• 한국수자원학회논문집
• /
• 제42권3호
• /
• pp.247-257
• /
• 2009

본 연구에서는 다방향 흐름 분배 알고리듬과 실시간 보정 알고리듬을 개발하여 분포형 강우-유출 모형에 적용하였다. 개발된 알고리듬의 적용과 분포형 모형 적용상의 약점인 계산시간 개선을 위해 비교적 간단한 수문과정 지배 방정식들을 이용하여 분포형 강우-유출 모형을 작성하였다. DEM(Digital Elevation Model)를 이용하여 공간해상도 변화에 따른 지형정보와 흐름정보의 변동성을 파악하였다. 모의수행 전처리 과정으로 가용한 고해상도 DEM 자료를 사용하여 공간해상도 변화에 따른 흐름정보의 손실을 최소화하고 상세흐름정보를 저해상도 흐름정보에 반영시키는 다방향 흐름분배 알고리듬을 개발하였다. 또한 실시간으로 유역상태량을 보정하는 실시간 보정 알고리듬을 개발하다. 개발된 모형은 저해상도 모의에서 유출 과정의 실제적 거동 정보를 유지할 수 있다. 그러므로 예측 정확도 향상 및 계산시간의 개선이 기대된다.

• 한국수자원학회논문집
• /
• 제42권3호
• /
• pp.259-270
• /
• 2009

본 연구에서는 다방향 흐름 분배 알고리듬과 실시간 유출 보정 알고리듬을 이용하여 개발한 분포형 강우 유출모형의 실제 유역에 대한 적용성을 평가하였다. 안동댐과 남강댐 유역에 대해 각각 우량계 관측자료와 레이더 관측 우량자료를 이용하여 분포형 강우-유출 모의를 수행하였다. 이전의 호우사상에 대한 유역 매개변수 보정 실시 후 보정된 매개변수를 이용하여 다른 호우사상에 대해 모형을 적용하였다. 안동댐 유역에 대해 흐름 군집화 결과를 제시함으로써 다방향 흐름 분배 알고리듬의 흐름추적에 대한 물리적 타당성을 입증하였다. 다방향 흐름 분배 알고리듬을 이용하여 정확도를 유지하면서 계산소요시간 단축이 이루어졌으며 실시간 유출 보정 알고리듬의 적용을 통해 좀 더 향상된 정확도를 갖는 결과가 도출되었다. 본 연구에서 개선된 유역 홍수관리를 위한 분포형 강우 유출 모형의 활용가능성을 제시하였다.

• 식물분류학회지
• /
• 제38권3호
• /
• pp.315-332
• /
• 2008

서해 중부지역에서의 상록활엽식물의 분포를 밝히기 위해 2006년 5월부터 2008년 3월까지 인천광역시에 속하는 136개 도서를 조사하였다. 이번 조사에서 28개 유인도와 49개 무인도 등 총 77개 도서에서 12종의 상록활엽식물이 조사되었다. 이 중 가장 흔한 종은 사철나무, 보리밥나무, 동백나무, 도깨비쇠고비 등이었다. 이들 식물은 또한 조사지역중 최북단에 위치한, $N 37^{\circ}60^{\prime}$ 부근 백령도에서도 자란다. 한편 송악, 붉가시나무, 참식나무, 마삭줄 등 4종은 $N 37^{\circ}10^{\prime}$ 부근 덕적면까지만 발견된다. 그러나 이들 식물은 육지에서는 한반도 남쪽이나 서남해안 지역까지 자란다. 상록활엽식물이 이런 고위도 도서지역까지 분포하는 것은 서해 난류의 영향으로 보인다. 현지조사와 문헌을 기초로 각 도서 별 상록활엽식물의 분포를 기재하였다.

• 한국해양공학회지
• /
• 제19권5호
• /
• pp.1-15
• /
• 2005

The motion behaviors including hydrodynamic interaction and mechanical coupling effects on multiple-body floating platforms are simulated by using a time domain hull/mooring/riser coupled dynamics analysis program. The objective of this study is to evaluate off-diagonal hydrodynamic interaction effects and mechanical coupling effects on tandem moored FPSO and shuttle taker motions. In the multiple-body floating platforms interaction, hydrodynamic coupling effects with waves and mechanical coupling effects through the connectors should be considered. Thus, in this study, the multiple-body platform motions are calculated by Combined Matrix Method (CMM) as well as Separated Matrix Method (SMM). The advantage of the combined matrix method is that it can include all the 6Nx6N full hydrodynamic and mechanical interaction effects among N bodies. Whereas, due to the larger matrix size, the calculation time of Combined Matrix Method (CMM) is longer than the Separated Matrix Method (SMM). On the other hand, Separated Matrix Method (SMM) cannot include the off-diagonal 6x6 hydrodynamic interaction coefficients although it can fully include mechanical interactions among N bodies. To evaluate hydrodynamic interaction and mechanical coupling effects, tandem moored FPSO and shuttle tanker is simulated by Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The calculation results give a good agreement between Combined Matrix Method (CMM) and Separated Matrix Method (SMM). The results show that the Separated Matrix Method (SMM) is more efficient for tandem moored FPSO and shuttle tanker. In the numerical calculation, the hydrodynamic coefficients are calculated from a 3D diffraction/radiation panel program WAMIT, and wind and current forces are generated by using the respective coefficients given in the OCIMF data sheet.