• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.104-106
• /
• 2001

In this paper, it is object of design of high efficiency slotless BLDC motor using film coil. Slotless BLDC motor is able to have high efficiency property and low cogging torque, due to magnetization of stator core have constant contribution by slotless core. But it is difficult to make coil winding of slotless BLDC motor. So we make amateur of slotless BLDC motor using film coil. Film coil is fabricated by drilling, electro-plating and etching of copper/insulator/copper plate. In this paper, after design of slotless BLDC motor for moving axial blower, it is fabricated by NdFeB permanent magnet type rotor and film coil.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.375-377
• /
• 2007

The purpose of this study was to investigate total $CO_2$ amount of steel and reinforced concrete construction, and compare and analyze $CO_2$ amount on construction-material. And then it was studied about new element that environment compatibility of architecture structure design based on paradigm of environment age. Architecture action should have proceeded course that reduce burden of the earth environment in relation between architecture and environment and increase contact of human and nature. As environment compatibility development is emphasized with architecture development, architecture structure design give improvement of one important element that environment compatibility except stability, function, economy and necessary propriety of environment compatability of construction design.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1998년도 제6회 1998 봄 학술연구발표대회 개요 집 디자인 학 연구
• /
• pp.41-42
• /
• 1998

• International Journal of Contents
• /
• 제7권4호
• /
• pp.84-89
• /
• 2011

General recognition on the role of a designer has differently changed according to the age and region respectively. This research has clarified general recognition on a designer's role among a designer, experts that designers mainly perform co-work and an ordinary people in a period when the design identity is more confused than any other time. The results of this research are as follows. First, the 13 definitions on a role of a designer in a company were identified through field interview survey by presidents and practical responsible persons in design-specialized companies. Second, it was proved whether there is a difference in recognition on a role of a designer between designers and non-designers. Third, this research divided a group of non-designers into two groups such as a design job-related group mainly performing co-work with designer, and an ordinary people's group that doesn't major design. After that, this research found out the most sympathizing definition on a role of a designer at a company in three groups divided into a designer's group, a design job-related group and an ordinary people's group. The awareness on the role of designer was more objectively regulated three-dimensionally in all aspects of a designers group and a non-designers group. In addition, the findings of recognition difference of each group on a designer's role will help comprehensive understanding on each experts group and an ordinary people. The findings of the research will help in performing co-work of designers and non-designers in design decisionmaking based on understanding of this recognition.

• Journal of Microbiology and Biotechnology
• /
• 제16권5호
• /
• pp.740-747
• /
• 2006

Amplification by universal consensus sequences in pathogenic bacterial DNA would allow rapid identification of pathogenic bacteria, and amplification of genus-specific and species-specific sequences of pathogenic bacterial DNA might be used for genotyping at the genus and species levels. For design of probes for molecular diagnostics, several tools are available as stand-alone programs or as Web application. However, since most programs can design only a few probe sets at one time, they are not suitable for large-scale and automatic probes design. Therefore, for high-throughput design of specific probes in diagnostic array development, an automated design tool is necessary. Thus, we developed a Web-based automatic system for design of genus-specific and species-specific probes for pathogen detection. The system is available at http://www.miprobe.com.

• 한국해양환경ㆍ에너지학회지
• /
• 제13권1호
• /
• pp.18-29
• /
• 2010

기후온난화에 대처하기 위한 방안 중, $CO_2$ 해양지중저장은 성공가능성이 높은 수단중의 하나로써 각광받고 있다. $CO_2$ 해양지중저장은 대량 발생원으로부터 $CO_2$를 포집하여 저장지로 수송한 후, 가스 저장층 이나 염대수층 등과 같은 해저 지질구조 내에 $CO_2$를 저장하는 공정 전체를 아울러 지칭한다. 우리는 2005년부터 $CO_2$ 해양지중저장 관련 기술들을 개발해왔으며, 주요 기술 개발 분야에는 $CO_2$ 저장후보지 탐색과 $CO_2$ 수송 및 저장 공정을 위한 기본 설계가 포함된다. 신뢰성 있는 $CO_2$ 해양지중저장 시스템설계를 위해, 가상시나리오를 개발하였으며 수치해석 프로그램을 이용하여 전체공정을 분석하였다. $CO_2$ 포집원으로 부터 주입저장지로 $CO_2$를 수송하는 공정은 열역학 상태방정식으로 모사 가능하다. 본격적인 설계공정에 대한 수치해석을 수행하기에 앞서 관련 열역학 상태방정식들을 비교 및 분석하였다. 분석된 상태방정식들의 정확도를 평가하기 위해 참조문헌의 실험데이터와 수치계산결과를 비교하였다. 현재까지 진행된 $CO_2$ 해양지중저장 공정설계는 주로 순수한 $CO_2$를 대상으로 하였다. 하지만 포집된 $CO_2$ 혼합물은 질소, 산소, 아르곤, 물, 황화수소 등의 불순물을 포함하고 있다. 작은 양의 불순물이 포함될 시에도 열역학적 물성치가 바뀔 뿐 만 아니라, 압축, 정제, 수송 공정 전체에 막대한 영향을 미치게 되므로 간과되어서는 안 된다. 본 논문에서는 해상 및 육상 $CO_2$ 수송에 영향을 미치는 주요 설계 인자들을 분석하였으며, 가상 시나리오의 매개변수에 관한 연구를 수행한 다음, 유량, 직경, 온도, 압력 등의 설계 인자들의 변화 범위를 제시하고자 하였다.

• 한국분말재료학회지
• /
• 제6권1호
• /
• pp.88-95
• /
• 1999

The purpose of this study is to investigate the manufacturing feasibility of WC-Co milling inserts via Powder Injection Molding (PIM) process. WC-Co is used in a wide variety of cutting tools due to its high hardness, stiffness, compressive strength and wear resistance properties. WC-Co parts for a high stress application were conventionally produced by the press and sinter method, which were Iimited to 2 dimensional shapes. Manufacturing WC-Co parts for a high stress application by PIM implies that tool efficiency can be highly improved due to increased freedom is design. P30 grade WC powder (WC-Co-TiC-TaC system) was mixed with RIST-5B133 binder and injection molded into milling inserts (Taegu Tech. Model WCMX 06T 308). The mean grain size of the powder was about 0.8$\mu$m. Injection molded specimens were debound by solvent extraction and thermal degradation method at various conditions. The specimens were sintered at 140$0^{\circ}C$ for 1 hr in vacuum. Carbon content, weight loss, dimensional change, and macro defects of the specimen were carefully monitored at each stage of the PIM process. PIMed WC-Co milling inserts reached 100% full density after sinteing. Its mechanical properties and micro-structures were comparable with the press and sintered milling insert. Carbon content of the sintered WC-Co insert was mainly determained by the atmosphere of thermal debinding. By controlling powder loading and injection molding condition, dimensional accuracy could be obtained within 0.4%. We confirm that PIM can not only be an alternative manufacturing method for WC-Co parts economically but also provide a design freedom for more effieient cutting tools.

• 한국재료학회지
• /
• 제33권2호
• /
• pp.29-46
• /
• 2023

The electrochemical reduction of carbon dioxide (CO₂) to value-added products is a remarkable approach for mitigating CO₂ emissions caused by the excessive consumption of fossil fuels. However, achieving the electrocatalytic reduction of CO₂ still faces some bottlenecks, including the large overpotential, undesirable selectivity, and slow electron transfer kinetics. Various electrocatalysts including metals, metals oxides, alloys, and single-atom catalysts have been widely researched to suppress HER performance, reduce overpotential and enhance the selectivity of CO₂RR over the last few decades. Among them, single-atom catalysts (SACs) have attracted a great deal of interest because of their advantages over traditional electrocatalysts such as maximized atomic utilization, tunable coordination environments and unique electronic structures. Herein, we discuss the mechanisms involved in the electroreduction of CO₂ to carbon monoxide (CO) and the fundamental concepts related to electrocatalysis. Then, we present an overview of recent advances in the design of high-performance noble and non-noble singleatom catalysts for the CO₂ reduction reaction.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 2001년도 디자인학연구 2001 봄 학술발표회 논문집
• /
• pp.72-73
• /
• 2001

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1440-1445
• /
• 1990

The system with softfware packages for control system design unifying and encompassing rule based control and conventional control based on numerical models were developed. Users who are not familiar with control theory, numerical computing, and artificial intelligence (AI) can perform system analysis, control design and development of AI control system without difficulty.