• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1-6
• /
• 2008

When a saturated clay is sampled in an undisturbed manner from a bore hole, the sample extends vertically and shrinks horizontally under undrained conditions due to stress release. The conventional consolidation test specimen is trimmed from the expanded sample so that its diameter is equal to the inner diameter of the consolidation test ring, this test procedure does not reproduce the actual consolidation behavior. The measurement of sample extension was conducted by means of overcoring method found that the extension strains were 1 to 2%. To simulate the in-situ consolidation behavior, the consolidation test method that uses a specimen with a slightly smaller diameter than the inside diameter of consolidometer so that the specimen expands laterally to the inside of the ring.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.977-980
• /
• 1993

The technique to design high performance small motors has been based on experimental data, which results from lots of cost, experience and time in manufacturing. Recently, as high-performance computer appears, many engineers use numerical methods to design and analyze electric machine. Since, the step motor which has very small air gap(0.02-0.05mm) is different from other electric machine in its structure. The shape of rotor teeth and stator teeth influence seriously on the torque characteristics. And it is operated over magnetic saturation point. Therefore, the design of step motor needs to solve nonlinear problem and to calculate magnetic field precisely. In this paper, we solve nonlinear problem by employing Finite Element Method and obtain torque-displacement characteristics for the design of step motor. We also manufacture VR step motor according to the obtained results, and measure some torque characteristics. Through comparing calculated results with experimental results, it is verified that FEM is very useful to design step motor, and the motor designed by our technique is improved in its step accuracy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 지반공학 공동 학술발표회
• /
• pp.49-83
• /
• 2005

ESCP Project showed an urban excavation case and introduced design method for case of Soil-Structure behavior in urban excavation. In this case, a retaining structures design to analysis the behavior of retaining wall and adjacent structures in urban excavations was applied by using a Elasto-plastic beam and limit Equilibrium analysis and soil-structure interaction analysis. Reliable design of earth retaining structures and the ground adjacent to braced wall in urban excavation are often difficult due to many variable factors. The ground settlement and the damage of adjacent structures in urban excavation has been an imprtant issue. Therefore, the stability of the adjacent structures must be secured with the excavation support and research on the protection of adjacent structure is necessary.

• 디지털융복합연구
• /
• 제15권10호
• /
• pp.405-410
• /
• 2017

본 연구는 유럽 지역을 중심으로 활발하게 운영되고 있는 코워킹&코리빙 스페이스 15곳을 유형별로 분류, 사례조사를 통해 국내 코워킹&코리빙 스페이스가 나아가야 할 방향성을 제안하는 데 그 목적이 있다. 연구방법으로는 1차로 문헌 연구를 통해 공유경제서비스의 유형과 코워킹&코리빙 스페이스의 이론적 배경을 고찰하였다. 2차로 3차 산업혁명 공유경제의 연결 선상에서 더욱 진화된 과정으로 간주하는 4차 산업혁명의 공유경제의 3대 키워드를 유추하고, 코워킹&코리빙 스페이스 15곳을 유형별로 분류하여 사례 조사를 진행하였다. 그 결과, 3가지 유형별 특성에 따라 각기 다른 목적성 중심의 특성이 나타났다. 또한, 공통으로 공동체적 특성이 두드러지며 플랫폼 자체의 커뮤니티를 통해 다양한 협업 루트를 제공한다는 특징을 알 수 있었다. 본 연구를 바탕으로 앞으로 국내의 코워킹&코리빙 스페이스의 활성화 방안을 위한 참고자료로 사용될 수 있을 것을 기대하며, 이후 진행될 후속 연구에도 도움이 되길 기대한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.28-30
• /
• 1996

In the paper the authors deal with inverter fed induction motors design criteria for having a wide constant power range. In particular, the flux weakening operation is the main feature considered. The design target concerns the possibility of having a wide flux weakening region avoiding or limiting, at the same time, to oversize the motor and the inverter.

• 한국터널공학회:학술대회논문집
• /
• 한국터널공학회 2005년도 학술발표회 논문집
• /
• pp.117-128
• /
• 2005

This Paper present design parameters of grouting by reviewing several published equations and the results of coupled analysis considering the difference of permeability between soil and grouted zone. Also, the feasibility of couped analysis in the design of grouting is studied for seeping water quantity into tunnel, displacement of tunnel face, drawing down of groud water table, settlement of ground and stress of tunnel supports.

• 한국CDE학회논문집
• /
• 제5권1호
• /
• pp.42-49
• /
• 2000

This paper presents a solid modeling system that enables real time co-operative modeling and discussion on m between geographically separated designers. The modeling system is implemented using CORBA architecture and integrated in WWW with Java technology. The server objects use a commercial solid modeling kernel to provide modeling features and access database including product model data. The client is implemented using Java2 platform so that enables end-users access the system with web-browsers.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.117-120
• /
• 2001

This paper presents a HW/SW co-design environments and its validation for development of virtual component on the 32-bit RISC core which is used in the design of Information-Appliance-On-a-Chip. For the experimental environment, we developed the cycle-accurate instruction set simulator based on SE3208 RISC core of ADChips. To verify the function of RISC core at the cycle level, we implemented the verification environment by grafting this simulator on the Seamless CVE which is a commercial co-verification environment.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.33-35
• /
• 2004

The size of a PLS 300w's lighting source is smaller than the size of other's. It makes the reflector design of pls 300w more efficient. We designed it and analyzed the result of the reflector design in this paper.

• 한국정밀공학회지
• /
• 제26권9호
• /
• pp.23-30
• /
• 2009