• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.133-146
• /
• 2006

Collaborative optimization (CO) is a multi-level decomposed methodology for a large-scale multidisciplinary design optimization (MDO). CO is known to have computational and organizational advantages. Its decomposed architecture removes a necessity of direct communication among disciplines, guaranteeing their autonomy. However, CO has several problems at convergence characteristics and computation time. In this study, such features are discussed and some suggestions are made to improve the performance of CO. Only for the system level optimization, genetic algorithm is used and gradient-based method is used for subspace optimizers. Moreover, response surface models are replaced as analyses in subspaces. In this manner, CO is applied to aero-structural design problems of the aircraft wing and its results are compared with the multidisciplinary feasible (MDF) method and the original CO. Through these results, it is verified that the suggested approach improves convergence characteristics and offers a proper solution.

• 한국정밀공학회지
• /
• 제32권8호
• /
• pp.719-726
• /
• 2015

This paper presents a velocity-synchronizing control for the multiple axes of an injection unit; based on MBS, a virtual design model has been developed for the multiple-axes servomechanism. Prior to the design of the controller, a linear plant model was derived via open-loop response simulations. To synchronize the motions of the multiple axes, a cross-type synchronizing controller was designed and combined with the PID control to accommodate any parameter mismatches among the multiple axes. From the tracking control simulations, a significant reduction of both velocity-tracking and position-tracking errors was achieved through the use of the proposed control scheme.

• 한국항공우주학회지
• /
• 제39권9호
• /
• pp.896-903
• /
• 2011

본 논문에서는 차세대 영상 압축 표준으로 주목받고 있는 JPEG2000 알고리즘을 유도탄 원격측정용 영상압축모듈 임베디드 시스템(embedded system)에서 효율적으로 구현하기 위한 DSP와 FPGA co-design 방법을 제안한다. DSP와 함께 FPGA에서 co-processing할 부분은 JPEG2000 알고리즘 가운데서 계산량이 많으면서도 FPGA 상에 구현하기 적합한 알고리즘인 MQ-코더 부분을 소프트웨어 profiling 작업을 거쳐 선정하였고 VHDL 언어를 사용해서 병렬 처리에 적합하도록 설계하였다. 구현한 MQ-코더의 성능을 검증하기 위하여 JBIG2 표준 테스트 벡터 및 실제 영상을 사용하였다. 실험결과 본 논문에서 제안한 MQ-코더는 기존 소프트웨어 코더보다 약 3배 정도의 압축속도를 향상 시켰다.

• 전기화학회지
• /
• 제18권4호
• /
• pp.137-142
• /
• 2015

$Mn_{1+X}Co_{2-X}O_4$ solid solutions with various Mn/Co ratios were synthesized by a combustion method, and used as cathode catalysts for lithium/air secondary battery. Their electrochemical and physicochemical properties were investigated. The morphology was examined by transmission electron microscopy (TEM), and the crystallinity was confirmed by X-ray diffraction (XRD) analyses. For the measurement of electrochemical properties, charge and discharge measurements were carried out at a constant current density of $0.2mA/cm^2$, monitoring the voltage change. Electrochemical impedance spectroscopy (EIS) analyses were also employed to examine the change in charge transfer resistance during charge-discharge process. $Mn_{1+X}Co_{2-X}O_4$ solid solutions showed enhanced cycleability as a cathode of Li/air secondary battery, and the performance was found to be strongly dependent on Mn/Co ratio. Among synthesized catalysts, $Mn_{1.5}Co_{1.5}O_4$ exhibited the best performance and cycleability, due to high charge transfer rate.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.208-218
• /
• 2006

It is very important to evaluate predictable problems diversely such as stability of a tunnel and structures when tunnel is inevitably constructed in the area where is adjacent to a structure and low overburden. Double electrified railway design on the third section of Donghae-Nambu line studied in this paper has some problems mentioned above. So more careful works are required before construction. In this study, ground surrounding is composed of faults, fault zone and set back about 13m from a Buddhist temple located on the upper part of the tunnel. From these conditions, this case study presents proper methods considering ground condition, effects of blasting and civil petitions. It is tried to make the tunnel and Buddhist temple stable by analytical technique and analysis of existing cases. And design considering stability of tunnel and adjacent structure during operation is carried out as well. Especially, environmentally friendly railway tunnel which is appropriate to the local condition and surroundings is designed by minimizing noise and vibration that is able to occur during construction and train service. From now on, this study is helpful to better design in the case of tunnel design which has to consider civil petition.

• 한국항공우주학회지
• /
• 제50권1호
• /
• pp.31-38
• /
• 2022

위성용 TR모듈이 지상용 또는 항공용 TR모듈과 다른 점은 높은 레벨의 진동, 충격과 같은 발사환경과 우주방사능, 진공, 온도 변화와 같은 궤도환경 고려가 필요하다는 것이다. 따라서 지상용 또는 항공용 요구사양과는 다른 전기적, 구조적 조건을 요구한다. 이에 따라 서론에서는 발사환경, 궤도환경에 대해서 서술하고, 본문에서는 위성용 TR모듈에서 GaN의 활용과 요구되는 조건을 충족하기 위한 설계 과정을 기술한다. 특히, 부품선정부터 Derating&RF Budget 설계, 공정설계, 열해석까지 각각 단계에서 고려할 설계요소에 대해서 서술한다.

• 한국군사과학기술학회지
• /
• 제27권2호
• /
• pp.247-255
• /
• 2024

Development of electronic warfare(EW) software has become increasingly challenging due to stricter regulations, shorter development cycles, and increased reliability testing. Consequently, software development often proceeds without proper architecture design, which can lead to missing critical quality requirements and potential system redesigns. In this study, we propose using Attribute-Driven Design(ADD) 3.0 to design software architecture specifically tailored for EW systems, enabling a more systematic approach to address quality requirements. The paper presents an overview of EW software and ADD 3.0 methodology, followed by an analysis of the architecture design results using static and dynamic views. The paper concludes by discussing the effectiveness of the proposed architecture design.

• 한국해양환경ㆍ에너지학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2015

본 연구에서는 이산화탄소 해양지중저장을 위한 운송 수단으로 활용될 $CO_2$ 운송선의 타당성조사 결과에 대하여 논한다. 중고 화물선 개조에 의한 $CO_2$ 운송선 확보와 신조에 의한 운송선 확보를 위한 개념 설계를 수행하였고, 이를 토대로 $CO_2$ 운송선의 획득 비용을 추정하였다. 마지막으로 가정한 시나리오에 대한 운용 방안을 검토하여 연간 운송량을 수송할 수 있는 필요 척수와 소요 비용을 함께 추정하였다.

• 한국수소및신에너지학회논문집
• /
• 제20권2호
• /
• pp.168-178
• /
• 2009

To check feasibility of SEWGS(Sorption Enhanced Water Gas Shift) system, conceptual design and sensitivity analysis of operating variables have been investigated based on a design program of two-interconnected fluidized bed. Based on the conceptual design results, the optimum configuration for SEWGS was considered. Among three configurations, bubbling beds system was selected as the best configuration. Process design results indicate that the SEWGS system is compact and feasible. Based on the selected operating conditions, the effects of variables such as pressure, $CO_2$ capture capacity, solid inventory, CO conversion and $CO_2$ capture efficiency have been investigated as well.

• 농약과학회지
• /
• 제7권1호
• /
• pp.1-11
• /
• 2003

새로운 농약을 탐색하고 개발하는데 있어서 고효율 유기함성 (HTOS) 기술과 고효율 검색 (HTS) 기술 등의 발전과 더불어 컴퓨터 화학을 이용한 분자설계 (CAMD) 방법으로 보편화되고 있는 비교 분자장 분석(CoMFA)과 비교 분자 유사성 지수분석(CoMSIA) 등, 3D QSAR 기법들을 위시하여 분자 홀로그램 구조 - 활성관계 (HQSAR) 분석방법 등, QSAR 기법들을 요약하고 그 활용 사례들을 간략하게 소개하였다.