• 한국농공학회지
• /
• 제28권4호
• /
• pp.57-65
• /
• 1986

A new method of determining the discharge coefficients and velocity which are very important factor to calculate the weight of riprap materials in the seadike closure gap can be derived through the hydraulic model test. On the basis of the results of this study, general hydraulic aspects between gradual horizontal and vertical closure method are compared, and also discharge and velocity computation procedures are presented.

• 호남수학학술지
• /
• 제33권3호
• /
• pp.407-418
• /
• 2011

There are two kinds of closing method for a given braid ${\beta}{\in}B_{2n}$, a braid closure $\hat{\beta}$ and a plat closure $\bar{\beta}$. In the article, we find a relation between the Conway potential function ${\nabla}_{\hat{\beta}}$ of braid closure $\hat{\beta}$ and ${\nabla}_{\hat{\beta}}$ of plat closure $\bar{\beta}$.

• Journal of Minimally Invasive Surgery
• /
• 제21권4호
• /
• pp.160-167
• /
• 2018

Purpose: The aim of our study was to present an abdominal wall closure technique using barbed suture $V-Loc^{TM}$ 90 after single incision laparoscopic appendectomy (SILA) and to compare perioperative outcomes with conventional layer by layer abdominal wall closure after SILA. Methods: From March 2014 to July 2016, a retrospective case-control study was conducted for a total of 269 consecutive patients who underwent SILA. According to abdominal wall closure methods, 129 patients were classified into the V-Loc closure group and 140 patients were assigned into the conventional layer by layer closure group. In the V-Loc group, abdominal wall closure was performed from the fascia to the skin with a single thread of unidirectional absorbable barbed suture $V-Loc^{TM}$ 90 2-0 using continuous running suture and reverse overlapping reinforced running technique. Subcutaneous closure and subcuticular suture were performed with the remaining portion of V-Loc. Results: The V-Loc closure group showed shorter total operation time ($40.0{\pm}15.4min$ vs. $44.9{\pm}16.3min$, p=0.013) and abdominal wall cusing continuous running suture and reverse overlapping reinforced running technique. Subcutaneous closure and subcuticular suture were performed with the remaining portion of V-Loc. Results: The V-Loc closure group showed shorter total operation time losure time ($5.5{\pm}0.9min$ vs. $6.5{\pm}0.8min$, p<0.001). Postoperative incision length was significantly shorter in the V-Loc closure group ($1.1{\pm}0.3cm$ vs. $1.8{\pm}0.4cm$, p<0.001). Postoperative wound pain, time to resume diet, postoperative hospital stay, complications including surgical site infection, or mean patient satisfaction score at one month after hospital discharge was not significantly different between the two groups. Conclusion: In conclusion, unidirectional knotless barbed suture is a safe alternative method for abdominal wall closure after SILA. It can save time while providing comparable cosmesis.

• Archives of Plastic Surgery
• /
• 제49권5호
• /
• pp.617-632
• /
• 2022

Tracheoesophageal puncture (TEP) and voice prosthesis insertion following laryngectomy may fail to form an adequate seal. When spontaneous closure of the fistula tract does not occur after conservative measures, surgical closure is required. The purpose of this study was to summarize the available evidence on surgical methods for TEP site closure. A comprehensive search across PubMed, Web of Science, SCOPUS, and Cochrane was performed to identify studies describing surgical techniques, outcomes, and complications for TEP closure. We evaluated the rate of unsuccessful TEP closure after surgical management. A meta-analysis with a random-effect method was performed. Thirty-four studies reporting on 144 patients satisfied inclusion criteria. The overall incidence of an unsuccessful TEP surgical closure was 6% (95% confidence interval [CI] 1-13%). Subgroup analysis showed an unsuccessful TEP closure rate for silicone button of 8% (95% CI < 1-43%), 7% (95% CI < 1-34%) for dermal graft interposition, < 1% (95% CI < 1-37%) for radial forearm free flap, < 1% (95% CI < 1-52%) for ligation of the fistula, 17% (95% CI < 1-64%) for interposition of a deltopectoral flap, 9% (95% CI < 1-28%) for primary closure, and 2% (95% CI < 1-20%) for interposition of a sternocleidomastoid muscle flap. Critical assessment of the reconstructive modality should take into consideration previous history of surgery or radiotherapy. Nonirradiated fields and small defects may benefit from fistula excision and tracheal and esophageal multilayer closure. In cases of previous radiotherapy, local flaps or free tissue transfer yield high successful TEP closure rates. Depending on the defect size, sternocleidomastoid muscle flap or fasciocutaneous free flaps are optimal alternatives.

• Journal of Chest Surgery
• /
• 제34권6호
• /
• pp.485-489
• /
• 2001

배경: 수술 후 흉골 합병증을 유발하는 원인 인자들 중 흉골 봉합선의 견고성이 차지하는 비중은 매우 크다. 본 저자들은 흉골 봉합 방법에 따른 흉골 열개 및 감염의 발생빈도를 조사하여 합병증이 적은 가장 효과적인 흉골 봉합 방법을 찾고자 하였다. 대상 및 방법: 1995년 1월부터 1999년 7월까지 개심술을 받았던 환자들중 45세 이상의 환자 489예를 대상으로 하였다. 봉합 철사 6개로 단순 봉합을 한 159예, 흉골병에 2개의 단순 봉합 후 3개의 8자형 봉합을 한 119예, 각 늑간에 2개씩 10개의 단순 봉합한 150예, 단순 봉합과 8자형 봉합을 혼합하여 사용한 61예를 대상으로 하였다. 234예에서 판막수술을, 213예에서 관상동맥 우회술을 시행하였으며, 42예에서 그 외의 수술을 하였다. 결과: 총 12예(2.5%)에서 흉골 열개 및 감염의 합병증이 발생하였다. 수술 후 흉골 절개부의 합병증은 철사 6개를 이용한 단순 봉합 환자군의 3.1%(5/159)에서, 8자형 봉합 환자군의 3.4%(4/119)에서, 철사 10개를 이용한 겹치기 단순 봉합 환자군의 2.0%(3/150)에서 발생하였으며, 단순 봉합과 8자형 봉합을 혼합하여 사용한 환자 군에서는 합병증이 없었다(교차비에서 유의성은 없으나 다른 세 봉합방법에 대한 상대위험도에서는 유의성을 보임). 판막수술을 받은 환자군의 7예(3.0%), 관상동맥 우회술을 받은 환자군의 5예(2.3%)에서 흉골 합병증이 발생하여 수술 종류에 따른 흉골 감염의 차이는 없었으며, 당뇨병은 흉골 합병증의 독립적인 위험인자가 될 수 있었다(교차비 및 다량분석에서 p = 0.00). 결론: 흉골 봉합 때 단순 봉합과 8자 봉합의 혼합방법을 사용함으로써 흉골봉합이 용이하고 수술 후 흉골의 열개나 감염의 합병증을 줄일 수 있다고 생각된다. 비해 64.5 $\pm$ 4.6%, 63.8 : 4.4%로 유의하게 개선된 소견을 보였으나(P<0.05), ll, III군에서 reserpine 및 prazosin으로 전처치 조건을 차단한 V, Vl군은 동일한 재관류 시간이 경과한 후 developed pressure는 52.2 $\pm$ 5.2%, 49.8 $\pm$ 5.7%로 단위시간당 수축기 좌심실압의 회복율은 54.8 $\pm$ 5.1%, 53.3 $\pm$ 3.6%로 II, III군에 비해 유의한 회복율의 감소를 보였고 이러한 회복율은 I군에 비해 유의한 차가 없었다. 결론: 교감신경 $\alpha$-수용체 작용약물에 의한 약물학적 전처치는 재관류 후 심근기능 회복에 유익한 효과를 나타냈으며, 이러한 전처치 효과는 교감신경계 신경전달물질의 고갈이나 $\alpha$1-수용체 차단제에 의해 소멸되는 것으로 보아 전처치에 의한 심근보호효과는 교감신경계 전달물질 및 $\alpha$1-수용체를 통해 유도됨을 알 수 있다.380$\pm$71 mL, p=0.05).방 및 치료에 도움이 될 수 있는 물질을 개발할 가치가 있다고 사료된다을 공급한 대조구에 비해 높았다. 어미의 성 성숙 및 산란은 두 번의 실험에서 대조구보다 저염분구에서 원만히 이루어졌다. 암컷 성숙 개체의 경우 1차 실험은 대조구 6마리, 저염분구 12마리였으며, 2차 실험은 대조구 5마리, 저염분구 12마리였으며, 2차 실험은 대조구 5마리, 저염분구 14마리로서 성숙유도에 있어 염분의 조절에 의한 성숙이 이루어진 것을 알 수 있다. 산란 시기는 1차 실험에서 대조구나 저염분구의 산란 개시 시점이 거의

• Journal of Chest Surgery
• /
• 제28권4호
• /
• pp.335-339
• /
• 1995

Secundum atrial septal defect occupies about 10 to 15% of congenital heart diseases, and the surgical accomplishment is outstanding, so that the operative mortality is getting near to zero percent. But, the methods of correction, direct closure versus patch closure are still controversial and there is no absolute method about it. Some surgeons prefer direct closure technique for its simplicity and lesser thrombogenicity but others, afraid of arrhythmia and suture detachment after closure of large defect, prefer patch closure. Usually most surgeons use direct suture technique in small and moderate sized defects and patch closure in large defects. In our hospital, 156 cases of isolated secundum atrial septal defect were closed directly by double continuous over and over suture using 5-0 polypropylene[prolene , regardless their sizes and the amounts of shunt flow. There were no operative mortality and no serious complications such as heart block, suture detachment and embolism.

• 한국정밀공학회지
• /
• 제12권4호
• /
• pp.127-134
• /
• 1995

The dynamic characteristics of a system can be critically influenced by system uncertainty, so the dynamic system must be analyzed stochastically in consideration of system uncertainty. This study presents a generalized stochastic model of dynamic system subjected to bot external and parametric nonstationary stochastic input. And this stochastic system is analyzed by a new stochastic process closure method and moment equation method. The first moment equation is numerically evaluated by Runge-Kutta method. But the second moment equation is founded to constitute an infinite coupled set of differential equations, so this equations are numerically evaluated by cumulant neglect closure method and Runge-Kutta method. Finally the accuracy of the present method is verified by Monte Carlo simulation.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1996-2008
• /
• 2004

A seamless analysis of material behavior incorporating complex geometry and crack- tip modeling is one of greatly interesting topics in engineering and computational fracture mechanics fields. However, there are still large gaps between the industrial applications and fundamental academic studies due to a time consuming detailed modeling. In order to resolve this problem, a numerical method to calculate an energy release rate by virtual crack closure technique was proposed in this paper. Both free mesh method and finite element method have been utilized and, thereafter, robust local and global elements for various geometries and boundary conditions were generated. A validity of the proposed method has been demonstrated through a series of fracture mechanics analyses without tedious crack-tip meshing.

• Journal of Mechanical Science and Technology
• /
• 제18권11호
• /
• pp.1989-1995
• /
• 2004

Finite element analysis(FEA) is the most popular numerical method to simulate plasticity-induced fatigue crack closure and can predict fatigue crack closure behavior. Finite element analysis under plane stress state using 4-node isoparametric elements is performed to investigate the detailed closure behavior of fatigue cracks and the numerical results are compared with experimental results. The mesh of constant size elements on the crack surface can not correctly predict the opening level for fatigue crack as shown in the previous works. The crack opening behavior for the size mesh with a linear change shows almost flat stress level after a crack tip has passed by the monotonic plastic zone. The prediction of crack opening level presents a good agreement with published experimental data regardless of stress ratios, which are using the mesh of the elements that are in proportion to the reversed plastic zone size considering the opening stress intensity factors. Numerical interpolation results of finite element analysis can precisely predict the crack opening level. This method shows a good agreement with the experimental data regardless of the stress ratios and kinds of materials.

• 소성∙가공
• /
• 제13권2호
• /
• pp.148-153
• /
• 2004

Finite element analysis of open die forging process to make rectangular billet has been performed in this study. Three dimensional rigid-plastic finite element method was used to analyze the effects of process variables, forging pass design and die configurations on the void closure phenomena to maximize the internal deformation for better structural homogeneity and center-line consolidation of the rectangular billet. The effect of anvil width ratio, anvil pitch, anvil shape and number of pass has been estimated by the degree of void closure ratio. Although it is difficult to optimize process parameters in the operational environments, favourable process conditions are suggested for better product quality.