• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.414-421
• /
• 2001

The present study is conducted to investigate the local heat/mass transfer characteristics on the shroud with blade tip clearances. The relative motion between blade and shroud has little influence on the overall heat transfer characteristics, except some local effects. Therefore, the relative motion between the blade and shroud is neglected in this study. A naphthalene sublimation method is employed to determine the detailed local heat/mass transfer coefficients on the surface of the shroud. The tip clearance is changed from 0.66% to 2.85% of the blade chord length. The flow enters the gap between the blade tip and shroud at the pressure side due to the pressure difference. Therefore, the heat/mass transfer characteristics on the shroud are changed significantly from those with endwall. At first, high heat/mass transfer occurs along the profile of blade at the pressure side due to the entrance effect and acceleration of the gap flow. Then, the heat/mass transfer coefficients on the shroud increase along the suction side of the blade because tip leakage vortices are generated and interact with the main flow. The results show that the heat/mass transfer characteristics are changed largely with the gap distance between the tip of turbine blade and the shroud.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.12-13
• /
• 2021

Methods for the manufacture, erection, and assembly of heavy frame modules were proposed. Interferences among precast members were prevented by using bolted metal plates for dry precast beam-to-column joints during assembly with a clearance for tolerance implementing grouted concrete filler plates instead of metal filler plates. Clearances for tolerances were provided to avoid conflictions among components during erection phases. These gaps were, then, grouted by high-strength mortar. The constructability of new connections of a beam-to-column joint using bolted metal plates for precast structures was examined using a full-scale assembly test in which practical observations indicated that members could be aligned and placed accurately in both horizontal and vertical directions, leading to a fast and convenient assembling. Bolt holes of the endplate were properly aligned using couplers with 30 mm fastened length embedded in the columns. The assembly test demonstrated the erection safety and structural stability of the proposed joints that were without filler plates when they were subjected to heavy loads at the time of their erection. The facile and rapid assembly of precast beam-to-column connections with a 30 mm tolerance was observed. The proposed assembly method is rapid, sustainable, and resilient, replacing the conventional methods of concrete frame construction, offering a connection that can be used in constructing infrastructure, such as buildings and pipe-rack frames.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.796-802
• /
• 2018

선박의 유체 저장 탱크 내부의 적재용량에 의한 선박 운동 고유 특성의 변화는 많은 실험 과 연구를 통해 밝혀졌다. 또한 이러한 현상에 의한 선박 운동 특성 변화를 최소화하기 위한 장치는 지속적으로 연구 및 개발되고 있으며, 특히 횡동요 운동에 대한 저감효과에 대한 부분이 주를 이루고 있다. 본 연구에서는 이러한 장치 중 하나인 저장탱크 내부의 격벽에 의한 횡동요 저감장치의 길이 변화에 따른 간극의 변화에 의한 선박 운동의 변화를 수치 시뮬레이션 하였다. 본 연구를 위해 경계요소법 기반의 부유체 운동 프로그램과 입자법 기반의 전산유체역학 프로그램이 동적 연성된 프로그램을 사용하였으며, 동적 연성된 프로그램은 동일 실험과의 비교를 통해 검증하였다. 검증된 프로그램은 격벽의 길이를 달리하여 간극에 변화를 준 다양한 경우에 대해 수치 시뮬레이션을 수행하였다. 그 결과 액체 저장률의 변화 및 액체 탱크 내부의 격벽에 의한 간극의 차이에 의해 선박 운동 특성이 변화함을 응답 진폭 함수의 비교를 통해 확인하였다. 주목할 만한 결과로써 적재용량에 따라 변화하는 선박의 운동 특성이 간극을 조정함으로써 동일한 선박 특성을 가지게 됨을 확인하였으며, 이는 격벽에 의한 간극의 조종을 통한 선박 운동 제어가 가능함을 보여준다. 추후 격벽의 수 및 각기 다른 길이를 가진 격벽에 의한 연구를 수행하여 격벽 길이 조정을 통한 선박 운동 특성 제어에 대한 연구를 수행할 계획이다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권6호
• /
• pp.869-877
• /
• 2020

The power consumption in the low consistency (LC) refining is an important indicator for the optimal control of the process and it is composed of the net power and the no-load power. The refining efficiency and process characterization of LC refining are directly affected by power consumption. In this paper, the effect of pulp consistency and average fiber length on the power consumption and refining efficiency were studied through the LC refining trials conducted by an experimental disc refiner. It is found that the curve of power-gap clearance can be divided into constant power section, power reduction section, and power increase section. And the no-load power and the adjustable domain of loading applied by the refining plates will increase as the increase of pulp consistency, while the increase of net power is larger than that of no-load power which makes the increasing of refining efficiency. Meanwhile, the adjustable domain of loading applied by the refining plates can be slightly improved by increasing the average fiber length, but its effect on the no-load power in the LC refining process can be neglected. The study of power consumption in LC refining is of positive significance for the proper selection of pulp properties in LC refining, in-depth exploration of refining mechanism, and energy consumption reduction in refining.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.46-55
• /
• 2014

고속 전송로를 위한 PCB(Printed Circuit Board) 설계기술은 꾸준히 발전되고 있으며, 통신 시스템의 대용량화에 맞추어 백플레인(Backplane)에 사용되는 스위치 패브릭 인터페이스(Switch Fabric Interface) 또한 10Gbps 이상의 직렬 인터페이스(Serial Interface)를 사용하도록 표준화가 진행되고 있다. 본 논문에서는 테라급 시스템에서 스위치 패브릭 인터페이스로 11.5Gbps의 직렬링크를 사용하기 위하여, PCB 재질 따른 전송로의 전송거리 별 성능을 비교하고, 비아 스터브(Via Stub)의 길이에 의한 영향 및 누화현상(Crosstalk)에 의한 영향을 시뮬레이션을 수행하여 분석하였다. 시뮬레이션의 결과로 백플레인 보드에 저유전 재질 PCB를 사용함으로써, 전송손실에서 8dB의 개선효과를 얻어 표준에서 정한 -25dB 기준을 만족하는 것을 확인하였다. 또한 비아 스터브 길이에 의한 반사손실의 영향을 분석하여 백드릴(Back-drill)여부를 결정하였으며, 전송신호 간 상호간섭을 최소화하는 이격거리를 검증하였다. 이러한 시뮬레이션의 결과로부터 모든 스위치 패브릭 링크에 11.5Gbps의 직렬 링크를 적용할 수 있도록 가장 효율적인 시스템구조를 확정하였다.

• Journal of Korean Neurosurgical Society
• /
• 제50권3호
• /
• pp.166-172
• /
• 2011

Objective : The intralaminar screw (ILS) fixation technique offers an alternative to pedicle screw (PS) and lateral mass screw (LMS) fixation in the C7 spine. Although cadaveric studies have described the anatomy of the pedicles, laminae, and lateral masses at C7, 3-dimensional computed tomography (CT) imaging is the modality of choice for pre-surgical planning. In this study, the goal was to determine the anatomical parameter and optimal screw trajectory for ILS placement at C7, and to compare this information to PS and LMS placement in the C7 spine as determined by CT evaluation. Methods : A total of 120 patients (60 men and 60 women) with an average age of $51.7{\pm}13.6$ years were selected by retrospective review of a trauma registry database over a 2-year period. Patients were included in the study if they were older than 15 years of age, had standardized axial bone-window CT imaging at C7, and had no evidence of spinal trauma. For each lamina and pedicle, width (outer cortical and inner cancellous), maximal screw length, and optimal screw trajectory were measured, and the maximal screw length of the lateral mass were measured using m-view 5.4 software. Statistical analysis was performed using Student's t-test. Results : At C7, the maximal PS length was significantly greater than the ILS and LMS length (PS, $33.9{\pm}3.1$ mm; ILS, $30.8{\pm}3.1$ mm; LMS, $10.6{\pm}1.3$; p<0.01). When the outer cortical and inner cancellous width was compared between the pedicle and lamina, the mean pedicle outer cortical width at C7 was wider than the lamina by an average of 0.6 mm (pedicle, $6.8{\pm}1.2$ mm; lamina, $6.2{\pm}1.2$ mm; p<0.01). At C7, 95.8% of the laminae measured accepted a 4.0-mm screw with a 1.0 mm of clearance, compared with 99.2% of pedicle. Of the laminae measured, 99.2% accepted a 3.5-mm screw with a 1.0 mm clearance, compared with 100% of the pedicle. When the outer cortical and inner cancellous height was compared between pedicle and lamina, the mean lamina outer cortical height at C7 was wider than the pedicle by an average of 9.9 mm (lamina, $18.6{\pm}2.0$ mm; pedicle, $8.7{\pm}1.3$ mm; p<0.01). The ideal screw trajectory at C7 was also measured ($47.8{\pm}4.8^{\circ}$ for ILS and $35.1{\pm}8.1^{\circ}$ for PS). Conclusion : Although pedicle screw fixation is the most ideal instrumentation method for C7 fixation with respect to length and cortical diameter, anatomical aspect of C7 lamina is affordable to place screw. Therefore, the C7 intralaminar screw could be an alternative fixation technique with few anatomic limitations in the cases when C7 pedicle screw fixation is not favorable. However, anatomical variations in the length and width must be considered when placing an intralaminar or pedicle screw at C7.

• 대한토목학회논문집
• /
• 제30권4D호
• /
• pp.369-376
• /
• 2010

현재, 단지 내 진출입 불허구간의 설치 및 운영에 대한 명확한 설치기준이 없어 교통소통과 안전에 많은 문제가 발생하고 있는 실정이나, 단지 내 진출입 불허구간에 관한 연구는 미흡하여 합리적인 설계가 이루어지지 못하는 실정이다. 이에 본 연구에서는 단지 내 진출입 불허구간을 진입부와 진출부로 분류하여 진 출입부 적정길이를 산정하였다. 진입부 적정길이 산정은 횡단보도 위치 및 정지선 이격거리와 2차로 진입차량 대기행렬 길이, 안전을 고려한 여유거리 등을 고려하여 산정하였으며, 진출부 적정길이 산정은 횡단보도 위치 및 차량길이와 가로교차로 진출차량의 행태를 고려하여, 조사지점과 거리별로 진출부 차간간격을 비교 분석하여 산정하였다. 이와 같이 단지 내 진출입 불허구간을 대상으로 차량행태 조사와 교통소통 및 안전을 고려한 진출입 불허구간의 적정길이를 제시함으로써, 향후 단지 내 진출입 불허구간의 적합한 설치기준 및 운영에 이바지할 것으로 판단된다.

• Tribology and Lubricants
• /
• 제34권4호
• /
• pp.138-145
• /
• 2018

Elliptical bearings are widely used for large steam turbines owing to their excellent load carrying capacity and good dynamic stability. Power loss in bearings is an extremely important parameter, especially for high turbine capacities. Optimization of operation conditions and design variables such as bearing clearance and bearing length can reduce the power loss in elliptical bearings. Although changes in the oil supply method have served to increase the efficiency of the tilting pad journal bearing, it has not explicitly improved elliptical bearings. In this study, we verify the static characteristics of an elliptical bearing by changing the direction of oil supply. We evaluate the bearing power loss and bearing metal temperature, and compare the bearing performance and reliability in different test cases. The direction of oil supply is $90^{\circ}$ (9 o'clock) and $270^{\circ}$ (3 o'clock) when the rotor rotates in a counterclockwise direction. We use an elliptical bearing with an inner diameter and active length of 220.30 and 110.00 mm, respectively. Bearing power loss and bearing metal temperatures are measured and evaluated by rotor rotational speed, oil flow rate, and bearing load. The results reveal a 20 reduction in the power loss when the direction of oil supply is 90. Furthermore, the oil film on the upper part of the bearing has a high temperature when the direction of oil supply is $90^{\circ}$. In contrast, when the direction of oil supply is $270^{\circ}$, the oil film on the upper part of the bearing is relatively cold.

• 대한기관식도과학회지
• /
• 제15권2호
• /
• pp.36-41
• /
• 2009

Background : Controversy exists whether patients with esophageal carcinoma are best managed with classical Ivor Lewis esophagectomy(ILO) as combined thoracic and abdominal approach or transhiatal esophagectomy(THO). The THO approach is known to be superior with respect to operative time, morbidity and mortality, and length of stay, especially at poor pulmonary function patient, but may represent an inferior cancer operation due to inadequate mediastinal clearance compared with ILO. Accordingly, we estimated the THO role at esophageal cancer to compare each operative approach. Material and Method : From January 2002 to December 2007, we performed a retrospective review of all esophagectomies performed at Keimyung University Dongsan Medical Center; 36 underwent THO, and 11 underwent ILO. Result : There were all men and squamous cell carcinoma but 1 woman at ILO group, 2 women at THO group. There were no significant differences between THO and ILO with age, sex, location of tumor, mean tumor length. There were significant differences at preoperative pulmonary function test(In ILO group, average FEV1 is $2.65{\pm}0.6\;L/min$ and iIn THO group, average FEV1 is $2.07{\pm}0.7\;L/min$). The amount of blood transfusion, hospital stay, leak rates and respiratory complication, hospital mortality rate were not significantly different. Conclusion : There was no significant difference in the post-operative complication, hospital mortality rate, long-term survival of patients of both operative method. THO method had lower mobidity and mortality at poor pulmonary function patient than ILO method. Hence, THO is a valid alternative to ILO for patients with poor general condition or expected post-operative respiratory complication.

• 한국운동역학회지
• /
• 제21권5호
• /
• pp.561-571
• /
• 2011

The purpose of this study was to perform the kinematic analyses of the women's pole vault skills in IAAF World Championships Daegu 2011. Subjects were the 1st through 8th place finishers in the pole vault. The kinematic analyses were divided into four phases: two dimensional run up analysis, and three dimensional analyses for the remaining plant, swing up, and extension phases. Run-up variables consisted of run up distance, number of steps, average step length, ratio of step length to height, average velocity at the final 5~10 m, approach position. Three variables were analyzed during plant: pole angle, center of gravity (COG) velocity, and COG takeoff angle. Swing up phase variables included: pole flection angle, COG velocity (horizontal, vertical, resultant), COG trajectory and bar approach angle of COG. Compared to the 2009 World Championships in Berlin, the average vault height increased, while run up velocity and approach position were almost unchanged. However, horizontal velocity during the last two steps of the final approach decreased noticeably compared to speeds from 1990. These results reflect the change in both technique and physical fitness in pole vaulters. During extension, the peak height of COG surpassed the clearance height by an average of 0.11m. These specific results can help coaches and athletes modify training and improve performance.