• Journal of Acupuncture Research
• /
• 제29권2호
• /
• pp.9-14
• /
• 2012

Objectives : This study was designed to evaluate the pesticide residue of herb medicine through high density ozone water cleaning system. Materials and Methods : We purchased ginseng(Panax ginseng) on market and sprayed pesticides (Diazinon) on ginseng. We analyzed pesticide residue according to washing methods(untreated, ozone water cleaning, ultrasonic cleaning, Water cleaning). As a result of each washing methods, in ozone water cleaning method pesticide residue was much less remained than in Ultrasonic Cleaning method and water cleaning method. Conclusions : High density ozone water cleaning is the best method for removing pesticides of herbal medicine.

• 한국표면공학회지
• /
• 제28권1호
• /
• pp.23-33
• /
• 1995

AISI 304 stainless steel has high resistance to corrosion due to the presence of a self-healing chromium oxide film on the surface, which also accounts for the difficulty in plating. Surface cleaning of this alloy is of fundamental importance in gold plating since its effectiveness puts an upper limit on the quality of the final coating. The cleaning of AISI 304 stainless steel was investigated with elimination of artificial passive oxide film and degreasing of remaining buffing wax as stearic acid. The familiar cleaning methods i.e. ultrasonic cleaning, electro-cleaning and activation treatment were fabricated in this study. Activation treatment showed best cleaning efficiency for elimination of passive oxide film among these methods, which was also confirmed by AES (Auger electron spectrometer) analysis. However, the best condition of cleaning was obtained by combining these methods. Electrocleaning time, for degreasing the stearic acid layer, was decreased with increasing amount of added KCN.

• KEPCO Journal on Electric Power and Energy
• /
• 제7권1호
• /
• pp.79-84
• /
• 2021

The fundamental element to be kept for big data analysis, artificial intelligence technologies and asset management system is a data quality, which could directly affect the entire system reliability. For this reason, the momentum of data cleaning works is recently increased and data cleaning methods have been investigating around the world. In the field of electric power, however, asset data cleaning methods have not been fully determined therefore, automatic cleaning algorithm of asset data for transmission cables has been studied in this paper. Cleaning algorithm is composed of missing data treatment and outlier data one. Rule-based and expert opinion based cleaning methods are converged and utilized for these dirty data.

• 한국정밀공학회지
• /
• 제30권9호
• /
• pp.977-982
• /
• 2013

Blades of wind energy plants are exposed to external shocks or internal cracks during operation. Furthermore, the blade surfaces can be contaminated by substances such as dust, blood of birds, salt or insects which can decrease the electricity generation efficiency significantly. For this reason, many blade cleaning companies started to appear and a variety of methods for cleaning were suggested. Despite these diverse methods, there has been no study to investigate how effectively to clean the substances in quantitative manner. In this paper, the cleaning efficiency of two rotor blade cleaning methods, brush and water-jet, is examined through experiments by changing operating parameters. Then, the optimal operating conditions for both methods are derived.

• 한국의류학회지
• /
• 제34권7호
• /
• pp.1162-1174
• /
• 2010

Excavated gold brocade, often shows signs of serious damage and contamination from environmental factors such as exposure to soil or human remains. Therefore, most of the conservation procedures are focused on the consolidation of the gold thread and on cleaning with water or organic solvents. Indiscreet cleaning using solvents could damage the gold leaf, which identifies the features of fabric. There is a need to develop cleaning protocols appropriate for relics through the careful analysis of the condition of the relics. This study finds the appropriate cleaning method for the excavated gold brocade. Four different cleaning methods, vacuum cleaning, kneaded rubber eraser cleaning, immersion wet cleaning, and absorption wet cleaning were applied to the excavated gold brocade. The degree of cleaning and damage were examined depending on the cleaning methods, changes to the physical condition (before and after cleaning) were also analyzed through the surface observation. Although immersion cleaning showed the best cleaning result, this method had a risk of damage to the gold thread. Absorption wet cleaning safely eliminated the various soluble contaminants and the rotten smell of relics. Kneaded rubber eraser was suitable for the excavated gold brocade fabric because it can be applied to selective parts, intentionally excluding some sensitive parts such as the gold thread. The vacuum cleaning method required special attention because of a possibility of suctioning off loosely attached gold leaf. Dual cleaning, the kneaded rubber eraser cleaning, followed by the absorption cleaning was the most effective method to preserve and clean excavated gold brocade.

• 반도체디스플레이기술학회지
• /
• 제11권3호
• /
• pp.7-11
• /
• 2012

Among various wet cleaning methods, megasonic and jet spray gained their popularity in single wafer cleaning process for the efficient removal of particulate contaminants from the wafer surface. In the present study, we evaluated these two cleaning methods for particle removal efficiency (PRE) and pattern damage on the aluminum layered wafer surface. Also the effect of $CO_2$ dissolved water in jet spray cleaning is assessed by measuring PRE. It is observed that the jet spray cleaning process is more effective in terms of PRE and pattern damage compared to megasonic cleaning and the mixing of $CO_2$ in the water during jet sprays further increases the PRE. We believe that the outcome of the present study is useful for the semiconductor cleaning process engineers and researchers.

• 청정기술
• /
• 제14권2호
• /
• pp.95-102
• /
• 2008

친환경적인 대체 세정제를 채택하기 위해서는 세정제의 세정성, 환경성, 경제성을 평가하여 체계적인 선정절차에 의거하여 도입 적용하여야 하며 객관적이고 효율적인 세정성 평가방법의 정립이 현시점에서 매우 중요하다. 따라서 본 연구에서는 여러 세정성 평가 방법들 중 광전자방출법(optically stimulated electron emission)(OSEE)을 활용한 세정성 평가에 관한 연구를 하였다. 실험에 사용된 오염물은 플럭스, 솔더, 그리스, 절삭유, 그리고 그리스 35%와 절삭유 65%을 혼합하여 만든 혼합 오염물로서 세정제에 의한 이들의 세정성을 평가하였다. 본 연구실에서 개발하였거나 조제한 세정제를 이용하여 세정 후 OSEE법 측정 결과와 중량법 및 접촉각측정법에 의한 세정성 평가방법을 비교 분석하였다. 본 연구 결과로 플럭스와 혼합오염물을 세정한 경우의 OSEE 세정효율은 중량법과 거의 유사한 결과를 나타내었지만, 솔더와 그리스 세정의 경우는 UV를 반사 또는 흡수하여 중량법과 비교할 수 없었다. 그리고 절삭유 세정의 경우 실질적으로 눈에 보일 정도로 피세정물 표면에 오염물이 남아 있음에도 불구하고 중량법 측정 시 100%의 세정효율을 보임으로써 중량법 측정의 한계를 보였지만 OSEE법으로는 미소잔류 절삭유의 존재를 측정할 수 있었다. 또한 OSEE법과 접촉각측정법의 세정성을 비교측정한 결과로 플럭스, 혼합 오염물 그리고 절삭유의 세정성 평가는 OSEE법과 접촉각측정법이 유사한 세정효율을 보여주었다. 그리고 솔더와 그리스 세정은 접촉각측정법이 OSEE법보다 더욱 정밀하게 세정성을 평가할 수 있는 것으로 판단되었다.

• 청정기술
• /
• 제5권2호
• /
• pp.1-12
• /
• 1999

세정공정은 여러 산업체의 생산공정에 활용되고 있는 공정으로서 세정과정중 다양한 환경 오염물질을 배출하고 있다. 따라서, 환경 및 안전규제가 국내외적으로 엄격하여짐에 따라 기존의 세정공정에서 사용되었던 세정제를 환경문제나 유해성 문제를 야기시키지 않는 환경친화적인 세정제로 대체하는 것이 절실한 실정이다. 대체세정제를 선정하기 위해서 기존의 세정제에 필적할 만한 세정성을 갖춰야 하지만 세정성 평가방법이 정립되어 있지 않은 실정이다. 따라서 본 연구에서는 실험실이나 산업체에서 활용 가능한 여러 가지 세정평가법을 정리하여 보았고 국내외 현장 적용사례를 조사 분석하였다.

• 한국레이저가공학회지
• /
• 제3권1호
• /
• pp.2-11
• /
• 2000

Laser cleaning has begun to attract a considerable amount of interest recently as a new cleaning technique among scientists and engineers. The unique characteristics of laser cleaning are currently finding successful applications in industry, in medicine as well as in the world of art conservation. This paper takes an overview of the laser cleaning technique itself including basic principles and characteristics, and provides an account of current trends especially with regard to practical applications. Experience with its successful applications in various fields shows that laser cleaning may be about to emerge as a real alternative to conventional cleaning methods.

• 청정기술
• /
• 제18권1호
• /
• pp.43-50
• /
• 2012

태양전지 제조공정 중 잉곳의 절삭공정 후 진행되는 태양광 실리콘 웨이퍼 세정에 관한 연구를 수행하였다. 태양광 실리콘 웨이퍼는 잉곳의 생산방법에 따라 단결정과 다결정 웨이퍼로 분류되고, 절삭 방법에 따라서는 슬러리로 절삭한 웨이퍼와 다이아몬드 와이어로 절삭한 웨이퍼로 구분할 수 있으며, 이의 방법들에 따라 웨이퍼 표면과 오염원이 달라질 수 있다. 본 연구에서는 세정대상물에 따라 오염원과 웨이퍼 표면의 특성을 관찰하였고 적합한 세정제를 개발하여 물성 및 세정성을 평가하여 적용성을 확인하고자 하였다. 개발된 세정제로 세정한 웨이퍼는 XPS 분석결과 잔류 오염물질이 관찰되지 않았으며, 표면조직화 후 균일한 패턴을 형성함을 확인할 수 있었다. 또한, 개발된 세정제를 웨이퍼 생산현장에서 테스트를 진행하여 기존 세정제보다 우수한 세정결과를 확보하였다.