• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06a
• /
• pp.73-78
• /
• 2006

The occurrence of detrimental substances in the paper machine leads to reduced economic performance of paper mills through reduced capacities due to increased paper breaks and cleaning times. In this article the latest generation of BASF's laser optical pitch particle counter is employed in the examination of a paper mill operating two paper machines and using a mixture of thermo-mechanical pulp and recycled fibres. The potential of the new instrument to differentiate between particles on the basis of size and chemical composition is discussed. In addition, direct evidence of the periodic and locational variation of detrimental substances in the paper machine is given. Finally, an example of the application of BASF's laser optical pitch particle counter in the selection of a suitable fixative system for a complex furnish is presented.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.952-954
• /
• 2000

In the cleaning-water treatment process, the flocculation machine is operated by the V.S motor when the coagulation-facility of the coagulation-process is operated. But after the flocculation machine is stopped by an instantaneous power failure, the transient takes place when the coagulation facility is re-started. To improve the transient state, we developed the reinforcement-circuit which had the function of soft-start and adapted to the field. As a result of this study, we reduced the damage of facilities and had the safety in maintaining the quality of water and improved the efficiency in the maintenance and the management.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.5
• /
• pp.383-389
• /
• 2016

In this paper, we present the hull blasting machine with vision-based weld bead recognition device for cleaning shipment exterior wall. The purpose of this study is to introduce the mechanism design of the high efficiency hull blasting machine using the vision system to recognize the weld bead. Therefore, we have developed a robot mechanism and drive controller system of the hull blasting robot. And hull blasting characteristics such as the climbing mechanism, vision system, remote controller and CAN have been discussed and compared with the experimental data. The hull blasting robots are able to remove rust or paint at anchor, so the re-docking is unnecessary. Therefore, this can save time and cost of undergoing re-docking process and build more vessels instead. The robot uses sensors to navigate safely around the hull and has a filter system to collect the fouling removed. We have completed a pilot test of the robot and demonstrated the drive control and CAN communication performance.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.62-67
• /
• 2001

Green technology is being developed up to a point that is feasible not only in an environmental sense, but also in an economical viewpoint. This paper introduces two case studies that applied $CO_2$ technology into nuclear industry. 1) Nuclear laundry : A laundry machine that uses liquid and supercritical $CO_2$ as a solvent for decontamination of contaminated working dresses in nuclear power plants was developed. The machine consists of a 16 liter reactor, a recovery system with compressors, and storage tanks. All $CO_2$ used in cleaning is fully recovered and reused in next cleaning, resulting in no production of secondary nuclear waste. Decontamination factor is still lower than that in the methods currently used in the plant. Nuclear laundry using $CO_2$ looks promising with technical improvements-surfactants and mechanical agitation. 2) $CO_2$ nozzle decontamination : An adjustable nozzle for controlling the size of dry ice snow was developed. Using the developed nozzle, a surface decontamination device was made. Human oils like fingerprints on glass were easy to remove. Decontamination ability was tested using a contaminated pump-housing surface. About 40 to 80% of radioactivity was removed. This device is effective in surface-decontamination of any electrical devices like detector, controllers which cannot be cleaned in aqueous solution.

• Archives of design research
• /
• v.15 no.4
• /
• pp.369-378
• /
• 2002

The washing and cleaning the clothing has been considered one of the hardest task of house chores to house wife. It is still big drudgery of house keeping in the so-called high tech society. General statistics says the efforts for better washing condition has developed in minimal. It is hard task as it was before. This study is focusing the appliances for the labor reduction have developed favorably to work more effectively. In the context of home mechanization, it is very important to explore the process of the invent, development and design of washing machine. Another point of view for the washing machine is that it is one of the household artifacts, and we witness a specific character by analyzing how it was evolved. Research shows the invention, innovation, improvement and modification of the washing machine by areas and companies such as Miele and Maytag, where present established washing machine manufacturers around on Europe and USA.

• Journal of Powder Materials
• /
• v.12 no.5 s.52
• /
• pp.351-356
• /
• 2005

Nanoscale Al powder with thin layer of alumina was produced by Wire Electric Explosion (WEE) process. Spark-Plasma Sintering (SPS) was performed for the produced powder to confirm the effectiveness of SPS like so-called 'surface-cleaning effect' and so on. Crystallite size and alumina content of produced powder varied with the ratio of input energy to sublimation energy of Al wire ($e/e_s$): Increase in ($e/e_s$) resulted in the decrease of crystallite size and the increase of alumina content. Shrinkage curve during SPS process showed that the oxide surface layer could not be destroyed near the melting point of Al. It implied that there was not enough or no spark-plasma effect during SPS for Al/Alumina powder.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.487-494
• /
• 2005

Nowadays a large amount of wastewater containing metal working fluids and cleaning agents is generated during the cleaning process of parts working in various industries of automobile, machine and metal, and electronics etc. In this study, aqueous or semi-aqueous cleaning wastewater contaminated with soluble or nonsoluble oils was treated using ultrafiltration system. And the membrane permeability flux and performance of oil-water separation (or COD removal efficiency) of the ultrafiltration system employing PAN as its membrane material were measured at various operating conditions with change of membrane pore sizes and soil concentrations of wastewater and examined their suitability for wastewater treatment contaminated with soluble or insoluble oil. As a result, in case of wastewater contaminated with soluble oil and aqueous or semi-aqueous cleaning agent, the membrane permeability increased rapidly even though COD removal efficiency was almost constant as 90 or 95％ as the membrane pore size increased from 10 kDa to 100 kDa. However, in case of the wastewater contaminated with nonsoluble oil and aqueous or semi-aqueous cleaning agent, as the membrane pore size increased from 10 kDa to 100 kDa and the soil concentration of wastewater increased, the membrane permeability was reduced rapidly while COD removal efficiency was almost constant. These phenomena explain that since the membrane material is hydrophilic PAN material, it blocks nonsoluble oil and reduces membrane permeability. Thus, it can be concluded that the aqueous or semi-aqueous cleaning solution contaminated with soluble oil can be treated by ultrafiltration system with the membrane of PAN material and its pore size of 100 kDa. Based on these basic experimental results, a pilot plant facility of ultrafiltration system with PAN material and 100 kDa pore size was designed, installed and operated in order to treat and recycle alkaline cleaning solution contaminated with deep drawing oil. As a result of its field application, the ultrafiltration system was able to separate aqueous cleaning solution and soluble oil effectively, and recycle them. Further more, it can increase life span of aqueous cleaning solution 12 times compared with the previous process.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.6
• /
• pp.1010-1020
• /
• 1997

For this study, we did needlework of the sample considering practical aspects of production and consumption of silk, high-quality material for women's clothes, and then analyzed the state of the seam puckering after press and dry cleaning, estimated the Seam Puckering based on the mechanical properties of silk related to machine sewing, and examined the effects which Mechanical Properties have on Seam Puckering closely. Through this, we reach the following conclusion. 1. There are three types of seam puckering for each stage, which are caused bathe smoothness of the surface by press, and the difference between the shrinkage rates of fabric and sewing thread by Dry Cleaning. 2. In analyzing seam puckering classified by each step, seam puckering after sewing the fabric is related to WT negatively, while to RT and W positively. Seam puckering after sewing and pressing the fabric is related to WT, RC, MMD negatively and seam puckering after sewing, pressing anddry cleaning the fabric isrelated to WT negatively, too. 3. Concerning the mechanical properties of the sample with a little seam puckering, WT, LC, WC, RC, MMD, SMD is relatively large while RT, B, 2HB is small. 4. Judging from the result of estimating seam puckering based on mechanical properties, the estimate-formula is satisfied in this study.

• Fashion & Textile Research Journal
• /
• v.12 no.1
• /
• pp.114-121
• /
• 2010

Denim is one of the most frequently used fabrics for blue jeans. After washing denim fabric frequently changes its size and color. Salespersons recommended that after purchasing blue jeans customers should dry clean them once before washing. The aim of this study was to investigate to what degree washing with a household washing machine and dry cleaning affected the dimensions and the color of denim fabric. The denim fabric shrank greatly after the first laundering in warp direction regardless of whether it had been dry-cleaned or not. However, it shrank little from the second to the tenth laundering and after each number of dry cleanings. The thickness of the denim changed in the same way as the shrinkage occurred when the number of launderings or dry-cleanings increased. Although the indigo came out of the denim into washing liquor, both of the $L^*$ values and the $b^*$ values of the laundered and the dry-cleaned denim fabrics were lower than those of the control fabric. Darkening of the fabric after washing attributed to the shrinkage in warp; specifically the deep-blue warp yarns more spaced on the fabric face and the back. The $L^*$ and $b^*$ values of the dry-cleaned fabric decreased less than those of the laundered. The value of $a^*$ increased much less than the other values. Staining of the white cotton fabric laundered with the denim fabrics became less as the number of launderings increased. The degree of staining from the dry-cleaned denim was much lower than that of the laundered fabric.

• Tribology and Lubricants
• /
• v.39 no.4
• /
• pp.133-138
• /
• 2023

This paper presents a discussion on lubricating oil filters. The maintenance of lubricating oil filters can improve the performance of mechanical systems and extend the service life of the lubricating oil. Therefore, the effective management of the lubricating oil can extend the service life of the machine and reduce maintenance costs. A representative method for managing lubricating oil is filtering the lubricating oil using a lubricant filter. However, effectively managing a lubricating oil using a lubricant filter requires an understanding of the related knowledge. In this paper, we present the definition, classification, characteristics, specifications, performance, and self-cleaning function of lubricating oil filters. The lubricant filters are classified based on the filter material, filtering method, filtering location, and amount of filtered fluid. Cellulose and glass fiber materials are conventionally used as materials for lubricant filters, and recently, metal materials, which show excellent durability, are being increasingly adopted. The filtering methods can be classified into physical, chemical, magnetic, and electric field methods, and the lubricant filters can be classified according to their location in the lubrication system. The beta ratio and efficiency of the lubricant filter can be determined based on the performance of the filter. Finally, there are many products or technologies that add a self-cleaning function to the filter to remove foreign substances or contaminants for efficient management.