• Title/Summary/Keyword: cleaning agent

Search Result 122, Processing Time 0.033 seconds

Application of Gaseous Ozone for Cleaning Biological Weapon Agent Contaminated Building (생물테러시 실내제독을 위한 효율적인 오존가스의 적용 방법)

  • Yoon, Je-Yong;Jeong, Woo-Dong;Mun, Sung-Min;Cho, Min
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.11 no.2
    • /
    • pp.101-108
    • /
    • 2008
  • This study attempted to develop the technology by gaseous ozone for decontaminating building affected by a model of biological weapon agent(Bacillus subtilis spores) instead of Bacillus anthracis spore. The use of ozone is attractive method from a practical point of view of decontamination procedure since it has strong oxidation power but no residue after application. We examined the disinfection efficiency of gaseous ozone to Bacillus subtilis spores which suspension was sprayed on different material surfaces and dried. Three different types of gaseous ozone was applied : dry ozone, dry ozone with humidified air, and water bubbled wet ozone. Dry ozone(1500ppm) failed to achieve any significant inactivation for 2hrs. However, six log reduction of B. subtilis spore was achieved within 30min by 1500ppm of water bubbled wet ozone. This result shows the noticeable inactivation efficiency by gaseous ozone compared with previous studies. Good performance by wet ozone was also found for military material surface.(i.e. : gas mask hood, protective garments, army peinted metal surface).

Dyeing of Wool and Nylon Fabrics with Chinese Scholar Tree Extract (괴화 추출물에 의한 모와 나일론직물의 염색성)

  • 배정숙;허만우
    • Journal of the Korean Home Economics Association
    • /
    • v.41 no.2
    • /
    • pp.107-121
    • /
    • 2003
  • This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

Preparation of Solvent-Free Low Foaming Scouring Agents and Their Scouring Characteristics (무용제형 저기포성 정련제의 제조 및 정련특성)

  • Park, Hong-Soo;Ahn, Sung-Hwan;Shim, Il-Woo;Jo, Hye-Jin;Hahm, Hyun-Sik;Kim, Yeoung-Chan;Kim, Seong-Kil
    • Journal of the Korean Applied Science and Technology
    • /
    • v.23 no.1
    • /
    • pp.37-44
    • /
    • 2006
  • Solvent-free low foaming scouring agents (LFSC) were prepared by blending of 2-ethylhexylaminoethyl sulfate (2-EHAS), POE(10) octadecylbenzyl- ammonium chloride (POBAC) and Sedlan FF-200 (FF-200). As the results of several tests, 2-EHAS/POBAC/FF-200/water (8g/12g/20g/60g) mixture (LFSC-5) showed good cleaning power, penetrating ability and stability to alkali, and gave less problem in water pollution. The foaming power of LFSC-5 measured by Ross and Miles method was 8mm foam height immediately after foaming, and that measured by Ross and Clark method was less than 300mm foam height at $30^{\circ}C$, and 18mm at $80^{\circ}C$. As a result, LFSC-5 proved a good low foaming scouring agent for fiber.

Evaluate of Electrochemical Characteristics in Electrolyzed Reduced Water

  • Park, Sung-Ho;Yun, Su-Jin;Kim, Jeong-Sik;Shin, Hyun-Su;Park, Soo-Gil
    • Journal of Electrochemical Science and Technology
    • /
    • v.2 no.2
    • /
    • pp.85-90
    • /
    • 2011
  • Active oxygen species or free radicals are considered to cause extensive oxidative damage to biological macromolecules, which brings about a variety of diseases as well as aging. Electrolyzed reduced water(ERW) has been regarded as a ideal antioxidative agent in recent years. ERW is produced by passing a diluted salt solution through an electrolytic cell, within which the anode and cathode are separated by membrane. It can be produced reactive materials in ERW near the cathode during the electrolysis of water. ERW have the following advantages over other traditional cleaning agents: effective antioxidative agent, easy preparation, inexpensive, and environmentally friendly. The main advantage of ERW is its safety and antioxidative effect. ERW with strong reducing potential can be used to remove dirt and grease from items such as cutting boards and other kitchen utensils. The primary aim of this study is the activation mechanism of oxidation reduction potentials, ion conductivity, pH, and electrochemical properties with reactive materials in ERW.

An Experimental Study on Explosion Hazard of Dry Cleaning Solvent Recovery Machine in Laundry (세탁소 유기용제 회수건조기의 폭발 위험성에 관한 실험적 연구)

  • Choi, Jung-Min;Son, Bong-Se;Kim, Dong-Suk
    • Fire Science and Engineering
    • /
    • v.27 no.1
    • /
    • pp.39-45
    • /
    • 2013
  • This study analyzes the explosion hazard of dry cleaning solvent recovery machine in laundry shop in two aspects, i.e. combustible and ignition source, and determines the explosive conditions of this machine by conducting mockup explosion tests repeatedly, varying conditions and using real dry cleaning solvent recovery machines. As to combustibles, two kinds of combustibles used widely in Korea have been selected and tested. The flash points, LEL's, and saturation vapor pressures of those combustibles have been measured, and their explosion specific curves have been drawn, based on the results of the measurements, so that the explosion risks of those materials may be determined, depending on the temperatures. Potential voltages generated from materials for laundry and foreign materials of metals have been assumed to be the ignition sources in this application, and their potential voltages have been measured, depending on temperature, humidity, and antistatic agent, by using real materials for laundry and a potential voltage measuring device. Tests have been conducted, varying the quantities, concentrations, and operating temperatures of materials for laundry. As a result, explosions have not been generated with potential voltages of materials for laundry, but explosions have been observed when applying artificial spark energy of 2.0 mJ.

Oxidation Added Wet Cleaning Process for Synthetic Diamonds (합성 다이아몬드를 위한 산화제가 첨가된 세정공정)

  • Song, Jeongho;Lee, Jiheon;Song, Ohsung
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.14 no.8
    • /
    • pp.3597-3601
    • /
    • 2013
  • In this study, a wet cleaning process, P II, using aqua-regia and sulfuric acid mixture with oxidant agent ($K_2S_2O_8$, $P_2O_5$, $KMnO_4$, $H_2O_2$ etc) is proposed to remove the metastable phase of graphite such as graphene and DLC for high quality synthetic diamonds. The process employed the conventional acid cleaning process (P I) as well as P I+P II to remove the graphite related impurities from the 200um-diamond powders synthesized at 7GPa-$1500^{\circ}C$-5minutes. The degree of cleaning after P I and P I+P II has been observed by naked-eye, optical microscopy, micro-Raman spectroscopy, and TGA-DTA. After P I+P II, the color of diamond became more vividly yellow with enhanced saturation with naked eye and optical microscopy analysis. Moreover, the disappearance of diamond-like-carbon (DLC) peak ($1440cm^{-1}$) observed by Raman spectroscopy confirmed the decrease in amount of remaining impurities. TGA-DTA results showed that the graphite impurities first started to dissolve at $770.91^{\circ}C$ after PI process. However, the pyrolysis started at $892.18^{\circ}C$ after P I+P II process because of the dissolution of pure diamonds. This result proved the effective dissolution of the metastable phase of graphite. We expect that the proposed P II process may enhance the quality of diamonds through effective removal of surface impurities.

Effect of Pre-treatment Agents on the Digital Textile Printing of Silk Fabrics (견직물의 디지털 프린팅에 있어 전처리제가 염색성에 미치는 영향)

  • Lee, San-Ha;Jeong, Dong-Seok;Chun, Tae-Il
    • Textile Coloration and Finishing
    • /
    • v.23 no.4
    • /
    • pp.263-273
    • /
    • 2011
  • Digital textile printing(DTP) technology made considerable advances in recent years. In this study, a pre-treatment agent has been prepared for the better coloration of digital textile printing. The ink formulation contained three kinds of 5g thickener (CMC, Sodium alginate, Dextrin), 25g urea, 5g sodium carbonate, and 465g distilled water. The optimal sharpness of outline was found in the 1-3% concentration of the pre-treating agent with a viscosity of 10-15 cSt. Even if the color difference between untreated and treated samples was not apparent in the printing step, the color appearance increased after steaming. The color appearance of cyan, magenta, yellow, black reactive colorants increased in the order of CMC>Sodium alginate>Dextrin. Wash fastness to shade change and staining for the treated samples were 4-5 rating, while untreated sample was 1-2 rating. Also, the pre-treated sample with 1:1 mixtures had 4-5 rating. Both dry and wet rubbing fastness to shade change and staining were excellent in the treated samples, whereas rubbing fastness of untreated sample was 1-2 rating. With exception of 3 rating to black color, light fastness properties were 4 rating for the remaining three colors in the regardless of treatment condition and mixing of pre-treating agents. Dry cleaning fastness of all samples were also 4-5 rating irrespective of treatment condition and mixing of pre-treating agents.

Studies on the Stabilities of Insectcides Combined with some Stabilizers (살충제제(殺蟲製劑)의 안정성(安定性)에 관(關)한 연구(硏究))

  • Woo, Chong-Hak;Kim, Jae-Wan
    • Journal of Pharmaceutical Investigation
    • /
    • v.1 no.1
    • /
    • pp.101-108
    • /
    • 1971
  • The stability and toxicity test for p.p'-DDT, DDVP and dipterex that put to used sample in this study effects is follows A. about p.p'-DDT (1) In elevating the stability of p.p'-DDT, best stabilizing solvent was benzene. (2) The stability-agent has no difficulty as long as it not contain metal ion for instance $Z_n^{2+}$,$C_r^{3+}$,$Al^{3+}$,and $Fe^{2+or3+}$ but in case of contain $F_e^{3+}$, the combination of salicylaminoguanidine is best effective. (3) Using this product for water-suspension, We must use span 40 for stability agent and adding it at the same time. (4) We must use container which does not week alkali and metal ion but it is to preserved in tight light-resistant container. (5) The stopper of container is adapted with above-mentioned condition of container, but it is better not to use metal material. (6) This product needs opening ventilation more than 30 minutes after diffusion or spray and in the room we remove cause of remained poison by cleaning the bottom. B. about DDVP and Dipterex (1) Benzene or toluene in best solvent to preserve stability of DDVP and Dipterex. (2) Span 40 is superior for stability agent of this product and second is span 80. (3) The pH of solution is very stable in pH 5-6 and comparative stable in alkali more than p,p'-DDT. (4) Container is to preserved in tight, lightresistant container and especially be careful of outflow and inflow of water. (5) Because this product is centeral stimulant poison, we must pay attention to prevent cause of contact diadermic toxicity after use.

  • PDF

Dyeing Properties and Ultraviolet-cut Ability of Fabrics Dyed with Coffee Bean Extracts (커피 추출액에 의한 직물의 염색성과 자외선 차단성)

  • Choi, In-Ryu;Joen, Mi-Sun
    • The Research Journal of the Costume Culture
    • /
    • v.17 no.4
    • /
    • pp.575-582
    • /
    • 2009
  • The coffee has been used as drink in the world and it has been using not only food but also dyeing. It can be used for four seasons in our normal living and it can be taken friendly everywhere. The coffee consists of about 8${\sim}$10% phenol(chlorogenic acid) that related to antioxidant and antimicrobial activity. However, its exact components and the dyeing property effects has not been well known yet. Therefore, the purpose of this study was to investigate the dyeing property and ultraviolet-cut ability of silk and nylon fabrics that was dyed variously with coffee extracts. Coffee extracts were done by boiling coffee with distilled water at $100^{\circ}C$ for 2 hours. As mordanting agent, we used $AlK(SO_4)_2$ $12H_2O$, $CuSO_4$ $5H_2O$, $FeCl_2$ $4H_2O$. As the result of the dyeing properties and ultraviolet-cut ability of fabrics dyed with coffee bean extracts, we can find that the optimum dyeing temperature and dyeing time of the silk and nylon fabrics dyed with coffee bean extracts was $90^{\circ}C$, 60 min. and the colorfastness of washing and dry-cleaning was improved by using mordanting agent(4${\sim}$5 grade). Ultraviolet-cut ability was showed more 90% in dyed nylon fabrics.

  • PDF

Tentative Model of Cooperative Work for Composting of Animal Residues(I) (동물성 잔재물의 퇴비화 작업 시안(I))

  • 유창성;이석영
    • Korean Journal of Organic Agriculture
    • /
    • v.5 no.1
    • /
    • pp.111-124
    • /
    • 1996
  • Composting of animal residues with weeds and waste papers as bulking agents was tested. Coorperative form of work with farmers, students, cleaning women and members of citizens' movement was attempted. The responses of participants for composting, through it's laboriousness and dirtiness, were favorable with feeling of doing good for social services. The temperature of compost was raised up to 83 $^{\circ}C$. in spite of cold winter weather after turning. The pH, water content, total carbon, total nitrogen and C/N ratio showed the similarity to stability steps of other usual composts. The contents of heavy metals were low except Cu in comparison with standard levels. The uses of waste papers as a bulking agent for composting of animal residues, especially for organic farming, would need more diverse investigations.

  • PDF