• The Research Journal of the Costume Culture
• /
• v.11 no.6
• /
• pp.956-966
• /
• 2003

The purpose of study is to find out a suitable cleaning method for excavated textiles of Jeon-ui Lee(1570∼1647). The textiles were excavated from her tomb in 1997, and her descendents put them in a box without any treatment and kept them in the warehouse since then. We used two kinds of silk as samples, non-dyed and dyed textile. The experiment was performed by 8 kinds of wet cleaning and dry cleaning methods, an ultrasonic cleaner was used in the wet cleaning, decane and perchloroethylene were used as solvents in the dry cleaning. The use of the ultrasonic cleaner in the wet cleaning method did not show any damage to the fibers of the textiles and it not only cleaned well but also was safe for the fugitive dyes. It resulted in more effective cleaning when the detergent was used together. Therefore, it is effective to use the ultrasonic cleaning on the delicate historical textiles and helpful to the operator's safety and environment.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.290-291
• /
• 2001

The relationship between velocity, viscosity, diffusion coefficient, mass transfer coefficient and characteristic length and mass transfer data can be correlated by dimensionless relationship in electrolytic process. The performance of dyestuff removal was decreased as the flow rate of electrolyte was increased. It was due to the effect of retention time decreasing was superior to that of turbulent inlet mixing. Sh/Sc$\^$1/3/ vs Re plot for Al flat electrode did not showed the general tendency of the relationship between Sh/Sc$\^$1/3/ and Re. It can be thought that flow rate was not sufficiently high to increase the effect of mixing.

• Proceedings of the KAIS Fall Conference
• /
• 2001.05a
• /
• pp.82-83
• /
• 2001

Selected microbes was applied to the treatment of textile wastewater with support particles. To enhance the treatment efficiency, biological treatment was achieved as first process. Wastewater with a COD of 870 ppm and color of 1340 PtCo unit was continuously treated in a 1.8 ton capacity reactor. In the case of combined processes, the effluent COD concentration and color were 40 ppm (95.4% reduction) and 20 PtCo unit (98.5% reduction).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.973-978
• /
• 2007

In this paper, we make a study of a thermal deformation by FEM and test to define the deformation mode of the Vacuum-Cleaner's Nozzle-Cover. In FEM analysis, 3 different conditions were considered separately, such as (1) Compressive force by Belt tension, (2) Friction heat between Belt and Shaft and (3) Compressive force combined with heat. Throughout FEM analysis it was found that the deformation was caused by heat and it was proved through a simulation test with a real product.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.89-92
• /
• 2004

Cyclone is widely apoted in the vacuum cleaner, because of it's simple structure, the dust collection efficiency is high and its transparency feaure which can be shown to the customer. At past times, cyclone performance is represented by collection efficiency, flow rate, pressure drop etc. At recent times the noise problem is getting important as cyclone comes into home-appliances. In this paper, cyclone's pressure drop and noise is measured at the variation of the cyclone structure and the main sources of cyclone peak noise is found by experiments and numerical analysis. In addition, the structure for peak noise reduction is suggested and it is beneficial both pressure drop and noise reduction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.121-126
• /
• 2018

The oral hygiene of patients admitted to the ICU (Intensive Care Unit) is very important. Critically ill patients are basically immunocompromised ones because of the high risk of infection by various pathogenic bacteria. The mouth is not only the primary site of infection, but also the site of systemic infections. The purpose of this study was to design a mouthpiece type vacuum oral cleaner for the oral care of seriously ill patients. A 3D CAD modeling and flow analysis model were established for a double structure type cleaner and standard tooth model, and their pressure and flow characteristics were analyzed. The pressure inside the oral cleaner was almost constant, but the velocity distribution showed a large difference between the inside and outside of the teeth. The velocity at the center region inside of the teeth was the highest, and the speed decreased as the distance from the center increased. In the analysis of the case where the suction tube was replaced by the drainage tube, the velocity at the center of the outer portion of the teeth was the highest. In order to increase the effectiveness of the oral cleaner, alternating between suction and drainage is proposed, and a design complement to increase the speed of the molar region is required.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.193-199
• /
• 1997

Until now, environmental problem has become more and more serious, and acoustic noise is one of environmental pollutions. For many years, ANC(Active Noise Control) has been made to reduce this noise. In this paper, active silencer using switching method is studied. This silencer is composed of single-phase full bridge inverter to drive cancelling loudspeaker. The inverter is controlled to reduce noise by ramp comparison control method. At the vacuum cleaner, noise control with FFCS(Feed-Forward Control Structure) is applied and geometric arrangement is replaced to avoid unstability of FFCS.

• Journal of Powder Materials
• /
• v.20 no.5
• /
• pp.382-387
• /
• 2013

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.194-194
• /
• 2004

This paper presents Single Phase SRM for the vacuum cleaner. The advantage of SRM is long life time, high suction power.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.421-424
• /
• 2003

An AP plasma technology has been developed for the application of dry cleaner, PR ashing and PI rework in the large glass size. The technology is cost effective, environment friendly, and best fits for coming generation LCD production since the design is easily scalable to bigger size glasses. Surface cleaning results based on the contact angle study has been presented for $5^{th}$ generation LCD bare glass. PR ashing results and various parametric studies have been also presented.