• 한국습지학회지
• /
• 제9권1호
• /
• pp.107-114
• /
• 2007

This study aimed to investigate the hexachlorobenzene (HCB) dechlorinating ability of sediment microbes collected from a natural canal receiving secondary effluents from an industrial estate and nearby factories. Nine sites along the stream and one in the estuary in the Gulf of Thailand into which the canal spills were specified and sampling for sediment and water. Preliminary analysis of the sediments showed that the first four sites nearest to the discharging location were contaminated by HCB within the range of 0.18 to 1.25 ppm. Apart from that, 1,3,5-trichlorobenzene which has never been commercially produced or used in any manufacturing processes except for the transformation from higher chlorinated benzene was also identified in the range of 0.16 to 0.24 ppm. This suggested a possibility of sporadically HCB contamination in this stream. Of more important, people in the community along this canal earn their living by coastal fishery; hence, posing a risk of spreading HCB and its less chlorinated congeners via food chain from caught marine creatures to human. As a result, there is an urgent need to understand the behavior of HCB dechlorination in this stream sediment which can lead to a clean-up action in the future. Serum bottles with sediment slurries (sediment to water ratio of 1:1 (v/v) and filtered to remove particles larger than 0.7 mm) from each site were inoculated with 2 mg/l of HCB, kept anaerobically in the dark at room temperature without any nourishment, and analyzed for HCB and its less-chlorinated congeners every 6 days. Total chemical oxygen demand, suspended solids, and volatile suspended solids were in the range of 21,492-73,584, 158,100-518,100 and 6,000-32,700 mg/l, respectively. It was found that all sediment slurries began to dechlorinate HCB in 12 to 30 days and the HCB was completely removed within 42 to 60 days or so. On the other hand, there was no HCB dechlorination occurred in the controlled set which was sterilized by autoclaving prior to the addition of HCB. This implies that the HCB transformation was solely due to microorganisms' activities. HCB was dechlorinated principally via pentachlolobenzene to 1,2,3,5-tetrachlorobenzene and terminated at 1,3,5-trichlorobenzene which is the major pathway as reported by many researchers. Dichlorobenzene has not been detected in any samples within the dechlorination period of 60 days. The results indicate that the microbial matrix in the sediment of this stream has an outstanding capability to dechlorinate HCB. Existing substrates and nutrients which mainly sorbed onto the solid phase and the typical temperature in Thailand were sufficient and suitable to promote the activities of these HCB-dechlorinating microbes.

• 대한기계학회논문집B
• /
• 제38권4호
• /
• pp.337-346
• /
• 2014

본 연구는 주기적 강제 진동이 가해지는 표면의 액적 모드 특성과 표면에 놓인 액적의 제거에 대한 조건을 실험적으로 이해하는 것을 목적으로 하고 있다. 액적의 거동을 명확하게 관찰하기 위해 아크릴 표면에 Teflon 코팅을 진행하여 접촉각을 높였고, 히스테리시스는 25도 이내로 진행하여 액적의 거동이 보다 쉽게 진행되도록 하였다. 본 실험은 먼지가 적은 청정실에서 실험이 진행되었다. 제작된 소수성 표면에 놓인 액적의 실제 공진 주파수를 예측하기 위해 이론 및 실험적 해석을 통해 두 접근방법의 타당성을 파악하였으며, 두 개의 초고속카메라를 액적의 상면과 측면에 설치하여 2가지 측면에서 액적의 다양한 형상 변형 특성- 모드 형상, 분리, 미소 액적의 발생, 그리고 좌우 비틀림의 특성을 관찰하였다. 이론 값 비교결과 실제 공진 주파수 값들의 차이가 약 18% 이하로 관찰되었으며, 이러한 차이는 접촉선 마찰, 비선형 벽 고착, 실험의 불확실성 등에 가장 큰 영향을 받는 것으로 판단된다. 사용된 스피커에 상대적으로 낮은 전압을 인가할 경우 액적의 접촉선은 고정된 상태에서 좌우 대칭적인 액적 형상진동이 나타났다. 반면, 높은 전압을 인가할 경우 액적의 접촉선은 비고정된 상태가 되면서 더 활발한 형상 진동이 나타났다. 가진 주파수가 모드 주파수와 일치할 경우에는 액적의 로브 크기가 주변부 주파수 일 때 보다 비교적으로 컸으며, 같은 전압을 인가 할 경우, 표면에 놓인 액적의 미소 액적 발생 및 완전한 제거는 2차 모드에서만 진행되는 것을 실험을 통해 규명하였다.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.535-542
• /
• 2002

The purpose of this study was to evaluate the effect of EDTA irrigant according to application time and temperature. 31 human mature extracted teeth with a single canal were sectioned with microtome in 3mm thickness and gained 62 samples of root canals. They were distributed randomly into 6 groups of 10 specimens each and control group of 2 specimens. Each specimen was prepared with GT rotary file (Dentsply, Maillefer Co., Swiss) and irrigated with 3 ml sodium hypochlorite every minute. Then smear layer was removed with EDTA solution (PULPDENT$^{\circledR}$, PULPDENT Co., USA.) except two control specimens. Specimens of each group were irrigated with 17% EDTA. The time and temperature of application were as follows : (Table omitted) All specimens were split longitudinally and prepared for examination by scanning electron microscopy. A set of reference micrographs was used to award a debris score as follows: 0 = no smear layer, all tubules clean and open; 1 = no superficial smear layer, tubule openings visible, but some contain debris plug or soft tissue remnants: 2 = moderate smear layer, some tubules open and others closed; 3 = heavy smear layer, most/all tubule openings obscured. Results were evaluated with Kruskal-Wallis test to determine whether there was statistically significant difference among six groups. Pairs of groups were analyzed using the Student-Newman-Keuls Method and Mann-Whitney test. The results were as follows : 1. Control specimens showed heavy smear layer at the canal walls 2. Among the groups applied with EDTA for 2 minutes, group 1 showed the heaviest smear layer, and there was statistically significant difference between group 1 and the other groups(p<0.05). 3. Among the groups applied with EDTA for 5 minutes, group 4 and group 6 showed smear layer but there was no significant difference between them. 4. Among the groups applied with EDTA for the same temperature, group 1 showed heavier smear layer than group 4, and there was statistically significant difference(p<0.05). 5. Among the groups applied with EDTA for the same temperature, group 2 showed heavier smear layer than group 5 and group 3 showed heavier smear layer than group 6. But there was no statistically significant difference among them. From the results above, it could be concluded, EDTA solution is effective in removing of smear layer when it is applied for 5 minutes. If EDTA is applied for 2 minutes, it should be applied above room temperature.

• 한국재난정보학회 논문집
• /
• 제10권3호
• /
• pp.420-430
• /
• 2014

화재와 같은 재난현장에서 재난대응활동을 수행하는 소방공무원은 진압 구조 구급활동을 하는 동안 열, 연기, 유독가스에 노출되며 정신적인 스트레스, 생물학적 유해인자, 그리고 화재 진압 시 요구되는 인체공학적으로 부자연스러운 자세로 인한 육체적 과부하 등의 다양한 유해인자에 노출되고 있다. 그러나 지금까지 이에 대한 연구는 개별적 수준에서는 일부 존재해 왔지만 화재현장에서 소방관에게 노출되는 유해인자를 종합적으로 정리하고 그 대책까지 제안한 연구는 존재하지 않았다. 본 연구의 목적은 재난현장에서의 안전 및 유해인자를 종합적으로 도출하고 그 대응방안까지 제시함으로써 소방공무원의 노출로 인한 건강장애 및 사고 예방에 기여하는 데 의미가 있다고 할 수 있다. 이에 소방업무환경별로 화재진압분야, 구조 및 구급분야, 생활환경분야로 나누어 환경분석을 하고 물리적 화학적 생물학적 심리적 측면으로 구분하여 화재현장의 유해인자를 도출하고 노출현황을 제시하였다. 그리고, 물리적 유해인자 중에는 특수건강검진 결과 가장 많은 케이이스수를 차지하는 소음분야에 대하여 대처방안을 모색하였다. 화학적 유해인자는 보호장비와 클린룸 운영방안을, 생물학적 유해인자는 감염예방교육과 예방접종, 주기적 관리점검 체계확립을, 심리적 유해인자는 PTSD 경감 부스 설치와 멘토링제도의 도입을 제시하였다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 1998년도 춘계학술발표 논문집
• /
• pp.255-263
• /
• 1998

Dust-free garment prevents contamination which otherwise is caused by skin and clothes to protect from dust or dirt. Therefore, it requires high performance and should function as a working clothes. Clothes are a medium between human and thermal environmental system, and it is required to study human enviroment to ensure comfortableness of clothes and to satisfactorily go along with enviroment .This study investigates the physical and physiological features of dust-free garment used in the clean room at a semiconductor factory in oredr to scientifically clarify what the dust-free garmint is as well as to contribute to the design and development of high performance material and clothes. Three kinds of dust-free fabrics (DFG-I, DFG-II, DFG-III) which are being developed by a local company are used to manufacture dust-free garment. These dust-free garments are dressed and tested in such an enviroment as similar to semiconmemts with temperature at 23${\pm}$1$^{\circ}C$ and humidity at 50${\pm}$5%RH in order to investigate the thermo physiological and psychological features of human body. The results of this study are as follows. The results of this study are as follows. 1.The mean skin temperature was significantly different among the clothes, subjects and experimental time. Temperature tends to rise from the time of exercising load. Continuous motion coupled sealed clothes prevents heat transmittance, and temperature rises in the order of DFG-l, DFG-ll and DFG-lll as time course. 2.As for the skin temperature by local timperature is minimun on the head and torso and increares remarkably at the terminal part of human body. 3. As for the body mass loss was significantly higher in DFG-lll than DFG-l and DFG-ll. 4. Though there is no significant difference in the temperature within clothes among the kind of clothes temperature is 1$^{\circ}C$ higher in the back. Temperature within all the dust-free garments 29.7$^{\circ}C$ in the back and 31.3$^{\circ}C$ in the chest which belong to the comfort zone(31-33$^{\circ}C$). The relative humidity is 39.7%RH in the chest and 33.8%RH in the back which is slightly below the comfort zone(40-60%RH) 5. The thermal sensation belong to the comfort zone regardless of the kinds of clothes. The subjects feels a slight fatigue as times goes. As for the subjective sense of subjects the mean skin temperature as well as temperature and humidity within clothes show similar tendency. This means that they relate with each other.

• 동서간호학연구지
• /
• 제2권1호
• /
• pp.83-95
• /
• 1997

Cooking food is very important in Chinese medicine when we regard the food to be the principal origin of the nutrition of human body and the condition required to maitain the activities of the life of human body. Chinese medicine has accumulated the diverse and rich experience of cooking food through long clinical experience as well as made an important contribution to the healthy and long life through the unique theory of cooking food. Chineses medicine has deep view on the relations between food cooking and healthy and long life as well as presented the principle of cooking food created unique ways of food cooking such as food treatment. As the above, from the ancient times, Chinese medicine established Chinese medical science of nutrition under the consciousness of the theory that food and medicine have the same origin and practiced the methods of promoting the health through rightly selecting the foods. Therefore it has been thought that human beings can enjoy healthy life by rich supply of the nutrition. Comfortable ways of sleeping requie the emotion and peace with temperation in pleasure and anger, and also we should be temporate in eating, acting, sleeping posture and be flee from the wind, and we should not put on a quilt when sleep, and we should sleep alone and be careful about sexual life. The concrete measures for sexual intercourse are that: 1) we should marry at the right age not to be married at early age. 2) we should obey nature and not live unmarried life. 3) we should be temperate in having sexual intercoure and in excessive sexual desire. Regarding the residence and clothes: the residence environment should be calm and beautiful and the room for the residence should be well designed to be clean and sanitary and we should wear suitable clothes. All living creatures are living according to the rhythm of the living body and the change of the great nature. The Reason why the living things show the periodical rhythm is not that it is the truth of the great nature, but that the living life itself shall be ceased to be existed in case of running counter to such rhythm. There are 2 specially important things: one is about food in biological view and the other is the residence in social side. By starting from the theory that food and medicine have the same origin and root, we should rightly select the foods to promote the health at the maximum, and it is very important for human to be well obeying the environment and temperate in the life of residence and mind (Choi, Sam Byun, Shon, Sook Young, 1997). As the above, the cook in Chinese medicine suggests us the suitable ways of achieving the goal of nursing. Therefore the continuous study of this field is necessary based on this my study though it is unsatisfactory at this time but it would be the basic materals in establishing the nursing science of Chinese medicine.

• 한국전기전자재료학회논문지
• /
• 제15권4호
• /
• pp.301-307
• /
• 2002

Direct bonded SOI wafer pairs with $Si ll SiO_2/Si_3N_4 ll Si$ the heterogeneous insulating layers of SiO$_2$-Si$_3$N$_4$are able to apply to the micropumps and MEMS applications. Direct bonding should be executed at low temperature to avoid the warpage of the wafer pairs and inter-diffusion of materials at the interface. 10 cm diameter 2000 ${\AA}-SiO_2/Si(100}$ and 560 $\AA$- ${\AA}-Si_3N_4/Si(100}$ wafers were prepared, and wet cleaned to activate the surface as hydrophilic and hydrophobic states, respectively. Cleaned wafers were pre- mated with facing the mirror planes by a specially designed aligner in class-100 clean room immediately. We employed a heat treatment equipment so called fast linear annealing(FLA) with a halogen lamp to enhance the bonding of pre mated wafers We kept the scan velocity of 0.08 mm/sec, which implied bonding process time of 125 sec/wafer pairs, by varying the heat input at the range of 320~550 W. We measured the bonding area by using the infrared camera and the bonding strength by the razor blade clack opening method, respective1y. It was confirmed that the bonding area was between 80% and to 95% as FLA heat input increased. The bonding strength became the equal of $1000^{\circ}C$ heat treated $Si ll SiO_2/Si_3N_4 ll Si$ pair by an electric furnace. Bonding strength increased to 2500 mJ/$\textrm{m}^2$as heat input increased, which is identical value of annealing at $1000^{\circ}C$-2 hr with an electric furnace. Our results implies that we obtained the enough bonding strength using the FLA, in less process time of 125 seconds and at lowed annealing temperature of $400^{\circ}C$, comparing with the conventional electric furnace annealing.

• 대한가정학회지
• /
• 제46권1호
• /
• pp.47-61
• /
• 2008

The purpose of this study is to provide information about domestic living of Korean immigrants in Australia and Canada who have the same cultural background for comparative study. For this, usage of domestic space and living style in housing of 52 Korean households in Melbourne of Australia and 32 Korean households in the region of Waterloo of Canada were analyzed. Ethnographic research with questionnaire were used. Results of the research were as follows. 1. Korean immigrants in each countries were living in houses which was built by company of Australia and Canada. 44.2% of Korean immigrants in Australia were using L+D K and 53.1% of Korean immigrants in Canada were using L D K. 2. Laundry was indispensable for Korean immigrants in both countries and they all wanted to use the laundry as a utility room which could dry, ironing and so on. 3. Drain hole on the floor of the bathroom was not indispensable for most Korean immigrants in both countries for hygienic reason. 4. Korean immigrants in both countries were ironing in master bedroom and they all wanted to separate it from there through renovation and extension and so on. 5. Korean immigrants in Canada were more active to use the formal lounge which has been planned as a traditional element of western house. 6. The seating style of Korean immigrants in both countries belong to chair-seating style mostly. But it was clear that they were making Kimchi with floor seating style in both countries. 7. A level of satisfaction about using carpet was not high for Korean immigrants in both countries cause of uneasiness to clean and it was considered to relate to the floor seating style of them. 8. Almost Korean immigrants were took off the shoes inside of the house and they had shoes cabinet beside the entrance or basement usually. 9. The most popular heating system was ducted heating in both countries. The level of satisfaction about this was different for Korean immigrants in Australia and Canada but most desirable heating system was Ondol for them in both countries commonly.

• 한국산업보건학회지
• /
• 제6권2호
• /
• pp.187-201
• /
• 1996

This study was to evaluate the efficiency of diffusive monitor using activated carbon fiber(ACF, KF-1500) in measuring airborne organic solvents. The following characteristics were identified and studied as critical to the performance of diffusive monitor; recovery, sampling rate, face velocity, reverse diffusion and storage stability. For the evaluation of the performance of this monitor, MIBK, PCE, toluene were used as organic solvents. In the sampling rate experiments, eight kinds of solvents (n-hexane, MEK, DIBK, MCF, TCE, CB, xylene, cumene) as well as the above solvents were used. The results were as follows: 1. The desorption efficiencies(DE's) of ACF diffusive monitor ranged from 83 % to 101 %. In contrast, those of coconut shell charcoal ranged from 78 % to 102 %. Especially, the DE's of ACF for the polar solvents such as MEK were superior to those of charcoal. 2. Experimental sampling rates on ACF were average 42ml/min(37-46ml/min) for 11 organic solvents at $24{\pm}2^{\circ}C$, $50{\pm}5%RH$. However ideal sampling rates(DA/L) were 33 % higher than experimental sampling rates. 3. The initial response(15~16 min) of the testing monitor was 2 times higher than the actual concentration determined by the reference methods at $24{\pm}2^{\circ}C$, $8{\pm}5%RH$ and $80{\pm}5%RH$. Within 1 hours, the curve reached a linear horizontal line at low humidity condition. But sampling efficiencies decreased with respect to time at high humidity condition. And sampling efficiencies were higher at high humidity condition than low humidity condition for MIBK. 4. At very low velocity (less than 0.02 m/sec), the concentration of ACF diffusive monitor were poorly estimated. But ACF diffusive monitor were not affected at higher velocity(0.2 m/sec-0.6 m/sec). 5. There was no significant reverse diffusion when the ACF monitors were exposed to clean air for 2 hours after being exposed for 2 hours at the level of 1 TLV. 6. There was no significant sample loss during 3 weeks of storage at room temperature and 5 weeks of storage at refrigeration.

• 국제지역연구
• /
• 제15권2호
• /
• pp.427-447
• /
• 2011

전 지구적으로 온실가스 저감을 위한 노력의 일환으로 탄소시장을 통해 적극적인 노력을 하고 있다. 탄소시장을 통해 온실가스를 줄일 수 있는 옵션은 배출권 거래제와 탄소세를 이용한 방안이 있다. 또한 의무감축 대상국과 개도국과의 협력을 통해서 탄소를 저감할 수 있는 청정개발시장(CDM)이 있다. 동북아 탄소시장은 탄소저감 의무가 있는 일본과 신재생에너지 개발 가능성이 높은 중국 그리고 개도국과 감축의무국 사이에 일정량의 탄소 감축을 시행할 가능성이 높은 우리나라로 구성되어 있어 삼국이 협력한다면 유럽의 ETS와 같은 협력적 국제 탄소시장이 탄생할 수 있을 것이다. 한 중 일 3국의 협력이 이루어지기 위해서는 많은 장애요인들이 극복되어야 한다. 가장 우선적으로는 자국에서 개발된 기술에 대한 지나친 보호, 자국에서 제공하는 CDM 사업본의 동북아 헤기회에 대한 무리한 자본 및 기술참여(공개) 요구, CDM 사업의 결과로 얻게 되는 탄소 Credit의 배분과 관련된 자국이기주의가 극복되어야 한다. 또한 중국과 일본의 동북아 헤게모니 장악과 관련된 소리 없는 전쟁은 내부적 협력을 방해하는 가장 주요한 요인이 될 수 있다.