• Corrosion Science and Technology
• /
• 제17권4호
• /
• pp.154-165
• /
• 2018

During the process of sulfur dioxide removal, flue gas desulfurization equipment provides a serious internal corrosion environment in creating sulfuric acid dew point corrosion. Therefore, the utilities must use the excellent corrosion resistance of steel desulfurization facilities in the atmosphere. Until now, the trend in developing anti-sulfuric acid steels was essentially the addition of Cu, in order to improve the corrosion resistance. The experimental alloy used in this study is Fe-0.03C-1.0Mn-0.3Si-0.15Ni-0.31Cu alloys to which Ru, Zn and Ta were added. In order to investigate the effect of $H_2SO_4$ concentration and the alloying elements, chemical and electrochemical corrosion tests were performed. In a low concentration of $H_2SO_4$ solution, the major factor affecting the corrosion rate of low alloy steels was the exchange current density for $H^+/H_2$ reaction, while in a high concentration of $H_2SO_4$ solution, the major factors were the thin and dense passive film and resulting passivation behavior. The alloying elements reducing the exchange current density in low concentration of $H_2SO_4$, and the alloying elements decreasing the passive current density in high concentration of $H_2SO_4$, together play an important role in determining the corrosion rate of Cu-bearing low alloy steels in a wide range of $H_2SO_4$ solution.

• 공기청정기술
• /
• 제11권2호통권41호
• /
• pp.50-58
• /
• 1998

The objective of this study was to evaluate air-cleaner as to its effectiveness in removing to-bacco and incense smoke particulates within a clean chamber, which was installed with 6HEPA filter units. The measurement elements included the concentrations o

• 한국대기환경학회지
• /
• 제8권3호
• /
• pp.155-161
• /
• 1992

A simple, fast yet sensitive method is described for the determination of fifty elements in coal by inductively coupled plasma mass spectrometry. The method involves complete dissolution of coal with mixed acid $(HNO_3, HF, HClO_4)$ in hish pressure Teflon bomb and subsequent inductively coupled plasma mass spectrometric(ICP-MS) measurement. The accuracy of the method, being evaluated by the analysis of NIST SRMs (1632a, 1632b) is better than 20% RSD for most elements. The limits of detection defined by two times $\sigma$ (standard deviation of operational blank) are in order of sub-ppm to ppm, which are low enough to quantitate most elements. However, the determiantions for few elements such as V, As, Se are severely interfered by molecular ions such that their accurate determiantions are not possible. Analytical results for twentyon coals from eight countries including six ones world major coal producing, Korea, Japan, China, I.C.S., U.S.A., Canada, Australia, and South Africa are presented. While the results for major elements agree well with the existing ones, those for a few trace elements disagree considerably. The existing values are considerably higher. It is not possible to judge which are more accurate. However, the exisisting values are more likely to be errorous inasmuch as they are obtained without using high purity reagents and clean laboratory techniques.

• 한국분무공학회지
• /
• 제20권1호
• /
• pp.14-19
• /
• 2015

Recently, R&D demand for environmental friendly vehicle has rapidly increased due to its global environmental issues such as global warming, energy and economic crisis. Under this situation, the most realistic alternative way for environmental friendly vehicle is a clean diesel vehicle. The common-rail fuel injection system, as key technology of clean diesel vehicle, consists of a high pressure pump, common-rail, high pressure fuel line and electronic control injector. In common-rail high-pressure fuel injection system, high pressure wave of injection system and geometry of injector elements have a major effects on high-pressure fuel spray. Therefore, in this study, the numerical model was developed for analysis about the common-rail fuel pressure pulsation by using AMESim code. We could secure stability of common-rail high-pressure fuel injection system through optimal design of fuel line.

• 한국항공우주학회지
• /
• 제33권8호
• /
• pp.1-7
• /
• 2005

본 연구에서는 삼각격자 균질화를 위하여, 확장된 위상학적 개선과정과 국소 최적화 기반 평활화를 결합한 국소 개선기법을 제안하였다. 먼저 격자의 연결 구조를 확장된 위상학적 개선과정을 적용하여 최적의 연결구조로 개선한다. 다음으로 격자의 질을 나타내는 비틀림척도를 최대화하기 위해 국소 최적화 기반 평활화를 수행한다. 이 국소 개선기법을 이용하여, 두 가지 격자 예제에 대하여 삼각격자 균질화를 수행하였다. 이 예들을 통하여, 본 연구에서 제안한 국소 개선알고리듬이 삼각격자의 질을 크게 향상시켜주는 경제적이며 효과적인 방법임을 보여준다. 또한, 이 기법은 적응격자 세분화의 격자 재생성과정에도 용이하게 적용될 수 있다.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2007년도 추계학술발표회
• /
• pp.43-49
• /
• 2007

Al, Ag, Au, Cu, Cd, Co, Fe, Ni, Ph, Zn 등과 밀접한 금속은 일반적인 원소이며, 지속적인 오염물질에 속한다. 금속은 생명체의 생리활동에 필수원소인 경우도 있으나 경우도 있으나 그 중의 일부는 정해진 한계값을 초과할 때에는 독성을 가진다. 자연수 중의 미량금속 측정은 정확도와 정밀도에 있어서 큰 오차를 가지고 있음이 장기간 인식되어 왔다. 미국과 유럽에서는 1975 년 이후 미량금속의 해수 중 농도가 과거에 인지된 농도보다 $1/10{\sim}1/1,000$ 정도 낮아졌으며, 수직 분포는 알려진 생물, 물리, 지화학적인 과정들과 일치하고 있음이 밝혀졌다. 이와 같은 결과는 대부분 미량원소에 대한 분석방법과 기기의 발전에 기인하며, 시료 채취, 보관 및 분석 과정에 발생할 수 있는 오염을 제거해야 하는 세심한 주의 요구되어 진다.

• 에너지공학
• /
• 제27권2호
• /
• pp.61-69
• /
• 2018

Rare earth elements together with Y and Sc (REEs) are essential in the development of technology for clean and efficient use of energy. In recent years coal deposits have much attention and attracted as a promising alternative raw sources for rare earth elements, not only because the REEs concentrations in many coals or coal ashes are equal to or higher than those found in conventional types of REEs ores but also because of the world wide demand for REEs in recent years has been greater than supply. In the coal ashes, REEs are mainly associated with carbonates, silicates and aluminosilicates in ashes at 800 and $1100^{\circ}C$. These elements are known to be powerful environmental tracers in natural biogeochemical compartments. In this study, to reviewed the REEs originating and distribution patterns in coal ash samples from the bedrock and/or soil weathering that were entrapped by lichens and mosses was investigated. The REEs patterns of different organisms species allowed minor influence of the species to be highlighted compared to the regional lithology.

• 감성과학
• /
• 제5권3호
• /
• pp.21-28
• /
• 2002

텍스타일 패턴 디자인에 대한 소비자의 감성을 반영하는 한 방법을 제시하기 위하여 블록 스트라이프 패턴 (block stripe pattern)에 대한 디자인 요소를 조사하였다. 자극물은 명도차(3가지), 배열(2가지), 폭(2가지), 간격(3가지)의 4가지 요소를 조작하여 구성되었다. 36가지 조합 중에서 사전 조사에서 독립적인 감성을 보이는 27개를 최종 자극물이 선정되었으며, 남녀 대학생 30명을 대상으로 감성평가를 실시하였다. 4가지 디자인 요소가 요인분석을 통해 도출된 12개의 감성차원에 미치는 영향을 측정하고, 물리량에 근거한 정량적 분석을 통해 각 자극물과 감성과의 관계를 파악하였다. 각 디자인 요소가 감성에 미치는 영향을 ANOVA 분석한 결과, 명도차, 간격, 폭, 배열의 순서로 의미있는 감성차이를 유발하였으며 명도차는 거의 모든 감성에서 감성차에 영향을 미치는 가장 설명력 높은 디자인 요소로 분석되었다. 디자인 요소 레벨에 따른 감성의 차이를 살펴보면, 폭이 좁을수록 '수수한', '깨끗한', '모던한', '심플한', '편한' 감성을, 간격이 좁을수록 '강렬한', '보수적인' 감성을, 명도차가 작을수록 '고급스러운', '모던한', '수수한', '심플한', '점잖은', 보수적인', '소프트한', '깨끗한', '편한' 감성을 나타내었다. 감성을 요소별 물리량으로 예측한 회귀모형을 도출한 결과, 12개의 감성 중 '보수적인', '캐주얼한', '모던한' 감성을 제외한 모든 감성에 대해 R²가 0.6 이상의 높은 적합도를 보였다. 이 결과를 토대로 소비자 감성이 반영된 2가지 디자인 프로토타입을 제시하였다.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.364-375
• /
• 2012

This study investigates the effects of interior design elements on the satisfaction and preference for space. Field measurements and surveys were conducted in three coffeeshops where various interior design elements were applied. Results indicate that movable tables and chairs for two people were preferred in the space. They need to be placed flexibly according to the visitors' needs to improve satisfaction for convenience. To improve spatial satisfaction, the brightness of color applied to wall surfaces was recommended to be lower than that of color used for floor surfaces. The surfaces of space and interior design elements such as furniture also need to be kept clean. Lamps with lower color temperature were effective to enhance spatial satisfaction. Light sources should be shielded when a pendant lighting system with general diffuse type was used in space. Natural daylight through window was also required for better satisfaction level. Multiple linear regression implied that the cozy feeling by electric light, existence of daylight, flexible layouts for tables and chairs, color and quality of material for tables and floor were significant contributors to overall spatial satisfaction.

• Ocean and Polar Research
• /
• 제43권4호
• /
• pp.335-352
• /
• 2021

Trace elements in the ocean have been known as essential micronutrients for the primary production of phytoplankton and the growth of marine organisms. The GEOTRACES program beginning in the mid-2000 provided a new understanding of the distribution, origin and behavior of trace elements in the ocean, together with the establishment of both clean seawater sampling and trace element analysis techniques. The Indian Ocean, one of the major oceans, is relatively the least explored area, despite playing an important role in global climate variability. Although trace element observations have recently been conducted in the Indian Ocean by Japanese-and Indian scientists, relatively not much study has been done compared to the Atlantic, Pacific and Polar Regions. Recently, together with the launch of R/V Isabu, a 5,000-ton grade large- and comprehensive research vessel, the observations of trace elements has been conducted in the Indian Ocean for the first time in Korea since 2018. In this paper, we introduce the key results of currently conducted GEOTRACES expedition in the Indian Ocean to present future trace element research directions in the Indian Ocean, and also reviewed the preliminary results in the Indian Ocean studies from Korea. In the 2020s, new Indian Ocean GEOTRACES projects are planned around European countries, and it is time for Korea to prepare for the next phase of the trace element study in the Indian Ocean in line with these international trends.