• Steel and Composite Structures
• /
• v.36 no.5
• /
• pp.553-568
• /
• 2020

Steel-concrete composite structures have been extensively used in building, bridges, and other civil engineering infrastructure. Shear stud connectors between steel and concrete are essential in composite members to guarantee the effectiveness of their behavior in terms of strength and deformability. This study focuses on investigating the shear stiffness of headed studs embedded in several types of concrete with wide range of compressive strength, and their effects on the elastic behavior of steel-concrete composite girders were evaluated. Firstly, totally 206 monotonic push-out tests from the literature were reviewed to investigate the shear stiffness of headed studs embedded in various types of concrete (NC, HPC, UHPC etc.). Shear stiffness of studs is defined as the secant stiffness of the load-slip curve at 0.5V_u, and a formulation for predicting defined shear stiffness in elastic state was proposed, indicating that the stud diameter and the elastic modulus of steel and concrete are the main factors. And the shear stiffness predicted by the new formula agree well with test results for studs with a diameter ranging from 10 to 30 mm in the concrete with compressive strength ranging from 22.0 to 200.0MPa. Then, the effects of shear stiffness on the elastic behaviors of composite girders with different sizes and under different loading conditions were analyzed, the equations for calculating the stress and deformation of simply supported composite girders considering the influence of connection's shear stiffness were derived under different loading conditions using classical linear partial-interaction theory. As the increasing of shear stiffness, the stress and deflection at the most unfavorable section under partial connected condition tend to be those under full connected condition, but the approaching speed decreases gradually. Finally, the connector's shear stiffness was recommended for fully connection in composite girders with different dimensions under different loading conditions. The findings from present study may provide a reference for the prediction of shear stiffness for headed studs and the elastic design of steel-concrete composite girder.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 1999.04a
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.

• Journal of the Korean Society of Earth Science Education
• /
• v.11 no.2
• /
• pp.125-144
• /
• 2018

The purpose of this study is to analyze the astronomical thinking level of elementary, middle, and high school students using ordered multiple choice items. For this purpose, we constructed a questionnaire comprising three items about spatial thinking and system thinking. This survey was conducted and applied to 1,066 students in the 5th grade, 8th grade, and 11th grade in 12 schools located in Gangwon Province. The collected student response data were analyzed by applying inferential statistics of classical test theory and Rasch model. The results of the analysis were as follows; First, in the level of spatial thinking, students were able to grasp the spatial location and orientation of the celestial body, but were not able to convert the celestial motion of two-dimensional plane into three-dimensional plane, and it was revealed that there is no statistically significant difference in the spatial thinking of students among grade levels. Second, in the level of system thinking, students were able to identify the components and relationship between components of the celestial motion system, but could not identify the patterns of the system, and it was revealed that there was statistically significant difference among the system thinking of students in different grade levels, unlike in spatial thinking. Third, the astronomical thinking expressed in certain context (content) was very similar regardless of grade level, Through this, we could confirm the context-dependency or content-dependency of the astronomical thinking of students. It is expected that the results of this study can be used as basic data for exploring ways to enhance astronomical thinking level in school science classes.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.1
• /
• pp.65-72
• /
• 1993

A numerical method for nonlinear free-surface-wave problem is developed in this paper. The final goal of this study is to simulate the towing tank experiment of a ship model and to partially replace the experiment by the numerical model. The exact problem in the scope of potential flow theory is formulated by a variational principle based on the classical Hamilton's principle. A localized finite element method is used in the present numerical computations which made use of the following two notable steps. The first step is an efficient treatment of the numerical radiation condition by using the intermediate nonlinear-to-linear transition buffer subdomain between the fully nonlinear and linear subdomains. The second is the use of a modal analysis in the final stage of the solution procedures, which enables us to reduce the computation time drastically. With these improvements the present method can treat a much larger computational domain than that was possible previously. A pressure patch on the free surface was chosen as an example. From the present computed results we could investigate the effect of nonlinearity on the down-stream wave pattern more clearly than others, because much larger computational domain was treated. We found, specifically, the widening of the Kelvin angle and the increase of the wave numbers and the magnitude of wave profiles.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.19 no.2
• /
• pp.213-229
• /
• 2017

Recently, in urban areas there is a tendency to construct more complex network-type tunnels including entrance and exit ramps. At the same time, various one-dimensional programs based on the network theory have been proposed for tunnel ventilation analysis. This paper aims at developing a program that can analyze the ventilation flow rate and pollutants concentration in complex network-type tunnels based on the none hardy-cross method. The flow analysis in the branch was carried out on the basis of the Gradient method, while for the concentration analysis a new logic has been developed to calculate the inflow and outflow concentration automatically in a complex network-type structure. Additionally, in the tunnel segments showing low flow rate, proper grid interval sizes were proposed to reduce numerical error. To verify the applicability of the program, flow rates predicted in the straight tunnels were compared with the classical velocity-diagram method by Stokic and the TVSDM program. The results showed that the errors were within 1%. In addition, the program was applied to the recent ventilation system adopted in the complex network-type urban tunnels.

• The Journal of Industrial Distribution & Business
• /
• v.10 no.10
• /
• pp.35-44
• /
• 2019

Purpose - This study focuses on the continuance intention of O2O fresh agricultural products e-commerce. By literature review, this paper looks through the classical theories which are often applied to study use behavior and continuance intention on the electronic commerce area. Ultimately based on the expectancy theory, Technology acceptance model, success model as well as trust model, a model of the continuance intention of fresh products O2O electronic commerce application is established. Research design, data, and methodology - Among users Chinese consumers have been chosen who have use experience as the research objects. From October 2, 2018 to November 2, 2018, 685 questionnaires in total were collected by the online release and collection. Expect for the negative questionnaires, the remaining 650 pieces of data are statistically analyzed. The collected data were firstly be analyzed by SPSS Ver. 25 on its frequency, reliability and exploratory factors. Then AMOS Ver. 25 is applied to the Confirmatory Factor Analysis, Discriminant Validity and hypothesis testing of the Structural Equation Modeling. Finally, the following research conclusions could be obtained from the hypothesis testing. Results - Firstly, in the extended IS model, quality factor for hypothesis testing, service quality, information quality and delivery quality have obviously present positive influences on satisfaction respectively. Secondly, in the hypothesis testing part of ECM-ISC model and UTAUT model, all hypotheses have presented accepted results. Especially from expectation confirmation to usefulness perception, the influence factor achieves 12.603, In the hypothesis of continuance intention, the influence factor of social influence on continuance intention is 7.748 and also it is the most remarkable one. Conclusions - The results show that the service quality of O2O fresh agricultural products e-commerce has the greatest impact on satisfaction, while the perceived usefulness of consumers has the most significant impact on O2O fresh agricultural products for sustainable use intention. This thesis makes up for the blank of O2O fresh food e-commerce for sustainable use intentions, and provides a theoretical basis for consumers' sustainable use behavior, and practical enlightenment for the sustainable development of O2O fresh agricultural products e-commerce.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.173-184
• /
• 2022

Focusing on the TikTok, this paper studies the factors that influence the use intention, flow and addiction of the elderly in short videos from three aspects of media attraction, perceived usefulness and user characteristics through quantitative research methods. In recent years, influenced by various factors, more and more seniors have begun to indulge in short form videos, which will do harm to their physical and mental health. Therefore, the researchers believe it is necessary to identify the behavioral intention of seniors and the path to addiction. According to the research results, the attractiveness of TikTok and the characteristics of seniors have a positive impact on the usefulness of media. In addition, the study confirms that media usefulness has an impact on use intention and use behavior, which may develop into immersion and addiction. This study not only supplements the classical TAM theory, but also provides a reference for helping seniors to use the Internet in a healthy way. The researchers look forward to expanding the research on the various Internet platforms used by seniors in different countries and regions.

• International Journal of Computer Science & Network Security
• /
• v.22 no.5
• /
• pp.79-88
• /
• 2022

Modern production requires production staff who have design competence, experience and skills to work in various types of work integrated into professional activities. Possession of digital design methods significantly expands the opportunities for professional activities of qualified workers. The purpose of our study was to study the impact of pedagogical conditions on the formation of design competence of future qualified workers in a group work. We have identified a set of pedagogical conditions that promote the development of professionally oriented artistic and technical creativity of workers in the conditions of curricular and extracurricular activities, which include motivational-target, procedural-semantic, organizational-technological, and subject-oriented. It is shown that the formation of design competence is determined by motivational, informational-active and reflection criteria, which are aimed at motivational-value, cognitive, operational-active, creative, social and emotional components of this competence. The methodology of the research is highlighted, which includes the use of the following methods: determination of the personality's motivational sphere in order to identify strong and weak motives of students activity; multiple intelligence to identify students talents in the direction of practical intelligence, which is important for design competence; determining the level of creative activity to identify manifestations of students creative abilities; identifying the type of students innovative thinking in order to develop motivation for success; factor-criterion model, developed on the basis of a qualimetric approach, which is used to identify the level of design competence formation in accordance with its components. The results of the study showed that the creation of separate pedagogical conditions in the institution of vocational education and training (VET) had a positive impact on the development of design competence, which shows the potential of artistic and technical design in the development of professional creativity of future qualified workers taking into account the environmental approach.

• 한국체육학회지인문사회과학편
• /
• v.57 no.5
• /
• pp.1-11
• /
• 2018

The purpose of this study was to investigate the views of Joseon held by Kano Jigoro, who was the creator of judo and spread the martial arts ideology across the world, to shed light on the fundamental essence of the martial arts ideology spread around Korea. Conducted in this perspective, the study generated the following results: first, Kano Jigoro grew up, receiving history education from classical scholars of Japan. He was accordingly influenced by the Seikanron, which argues that Empress Jingu, a mythical character, conquered Silla, Baekje and Gaya. The Seikanron became the basis of the Imna Ilbonbu theory during the Japanese rule and was projected onto martial arts ideas Jeongryeokseonyong and Jatagongyeong that were completed by Kano Jigoro and introduced into Joseon. Secondly, Kano Jigoro distributed and expanded the tale of statehood in the prism of martial arts ideology since the Meiji Restoration, which was possible because he connected his martial arts ideas to the statehood of Japan. As a result, they were used as the logic of Korea and Japan are One in Joseon unlike the rest of the world where they were applied as peace ideas. Finally, his martial arts ideology introduced into Joseon during the Japanese rule went through acculturation and showed the contradiction of being interpreted differently according to different individuals. Most Japanese people made use of his martial arts as a means of the Korea and Japan are One policy, whereas the pioneers of the Korean people excluded Kano Jigoro's view of state, included the nationalistic features in it, and trained their martial arts as a means of overcoming the national crisis.

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.6
• /
• pp.381-387
• /
• 2010

Both timbral features and spatial features are important in the assessment of multichannel audio coding systems. The prediction model, extending the ITU-R Rec. BS. 1387-1 to multichannel audio coding systems, with the use of spatial features such as ITDDist (Interaural Time Difference Distortion), ILDDist (Interaural Level Difference Distortion), and IACCDist (InterAural Cross-correlation Coefficient Distortion) was proposed by Choi et al. In that model, ITDDistswere only computed for low frequency bands (below 1500Hz), and ILDDists were computed only for high frequency bands (over 2500Hz) according to classical duplex theory. However, in the high frequency range, information in temporal envelope is also important in spatial perception, especially in sound localization. A new model to compute the ITD distortions of temporal envelopes in high frequency components is introduced in this paper to investigate the role of such ITD on spatial perception quantitatively. The computed ITD distortions of temporal envelopes in high frequency components were highly correlated with perceived sound quality of multichannel audio sounds.