• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 전문대학교육위원 P
• /
• pp.13-15
• /
• 1999

The zero voltage and zero current switching(ZVZCS) full bridge (FB) PWM converter using secondary active clamp is characterized by high efficiency, good ZVZCS characteristic, simple topology and low cost. But at the period for discharge of the secondary clamp capacitor, peak pulses and ringing pulse occur in rectified secondary side of the converter. In this paper, a novel secondary active clamp circuit for the ZVZCS FB PWM converter is proposed and a 50 kHz, 500 W prototype converter was experimented for verification of the converter characteristics. It was verified that high voltage peak pulses and ringing pulse on secondary rectified waveforms of the converter are decreased effectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.85-87
• /
• 2009

Due to the enormous progress in light emitting diodes (LEDs), LEDs have been become a good solution for lightings. In LED driver for lighting applications, it is required a high input voltage to drive more LEDs. Therefore, a high-voltage should be changed to low-voltage to supply power for drive IC. In this paper, a LED drive IC with hysteretic-buck converter topology using a voltage clamp bias circuit was proposed and verified through simulations.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권2호
• /
• pp.202-215
• /
• 2013

This paper proposes a SEPIC-input, self-driven, active clamp ZVS converter, where an auxiliary winding and a RC delay circuit are employed to drive the active clamp switch and to achieve asymmetrical duty control without any other extra circuits. Based on the fixed dead time and the resonance between capacitors and inductors, both the main switch and the auxiliary switch can rule the ZVS operation. Detailed operation modes are presented to illustrate the self-driven and ZVS principles. Furthermore, an accurate state-space model and the transfer functions of the proposed converter have been presented and analyzed in order to optimize dynamic performance. The model provides efficient prediction of converter operations. Experimental results, based on a prototype with 80V input and 15V/20A output, are discussed to verify the transient and steady performance of the proposed converter.

• Journal of Power Electronics
• /
• 제14권3호
• /
• pp.421-431
• /
• 2014

A DSP-based self-adaptive proportional-integral (PI) controller to control a DC-DC converter is proposed in this paper. The full-bridge topology is adopted here to obtain higher power output capability and higher conversion efficiency. The converter adopts the zero-voltage-switching (ZVS) technique to reduce the conduction losses. A parallel secondary active clamp circuit is added to deal with the voltage overshoot and ringing effect on the transformer's secondary side. A self-adaptive PI controller is proposed to replace the traditional PI controller. Moreover, the designed converter adopts the constant-current and constant-voltage (CC-CV) output control strategy. The secondary active clamp mechanism is discussed in detail. The effectiveness of the proposed converter was experimentally verified by an IGBT-based 10kW prototype.

• 조명전기설비학회논문지
• /
• 제24권5호
• /
• pp.136-144
• /
• 2010

본 논문에서는 2개의 액티브 클램프 포워드 컨버터로 구성된 투 스위치 인터리브 액티브 클램프 포워드 컨버터를 제안하고자 한다. 제안된 컨버터는 단지 2개의 스위치만을 필요로 하며, 각 스위치는 상호 보조스위치로서 동작하기 때문에 회로의 구성이 간단하고 저비용의 용이한 제어를 특징으로 한다. 아울러 부가적인 공진 인덕터로 인하여 데드타임 동안에 영전압 스위칭 동작이 가능하다. 제안된 컨버터는 인터리브 동작으로 인하여 출력 전압 및 전류 리플이 저감되므로 출력 필터의 크기를 줄일 수 있으며, 그로인하여 컨버터의 부피를 감소시킬 수 있다. 본 논문에서는 제안된 투 스위치 인터리브 액티브 클램프 포워드 컨버터의 모드별 해석과 특성을 논의하였으며, 160[W]급 시작품을 제작하여 그 타당성을 검증하였다.

• 전력전자학회논문지
• /
• 제10권3호
• /
• pp.302-311
• /
• 2005

본 논문에서는 액티브 클램프 포워드컨버터 2차 측에 탭-인덕터와 스너버 커페시터, 두 개의 다이오드로 구성된 무손실 스너버를 적용한 개선된 액티브클램프 포워드컨버터를 제안하였고, 종래의 컨버터와 비교하여 제안된 컨버터가 보다 적은 자화전류조건에서도 영전압 스위칭(ZVS)이 가능함을 보였다. 제안된 컨버터의 동작원리 및 모드를 분석하였고, 300W출력용량의 컨버터 시제품을 제작 실험하여 제안된 컨버터의 효율특성이 개선됨을 보였다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.11-22
• /
• 2018

This paper presents a single switch, high step-up, non-isolated dc-dc converter suitable for renewable energy applications. The proposed converter is composed of a coupled inductor, a passive clamp circuit, a switched capacitor and voltage lift circuits. The passive clamp recovers the leakage inductance energy of the coupled inductor and limits the voltage spike on the switch. The configuration of the passive clamp and switched capacitor circuit increases the voltage gain. A wide continuous conduction mode (CCM) operation range, a low turn ratio for the coupled inductor, low voltage stress on the switch, switch turn on under almost zero current switching (ZCS), low voltage stress on the diodes, leakage inductance energy recovery, high efficiency and a high voltage gain without a large duty cycle are the benefits of this converter. The steady state operation of the converter in the continuous conduction mode (CCM) and discontinuous conduction mode (DCM) is discussed and analyzed. A 200W prototype converter with a 28V input and a 380V output voltage is implemented and tested to verify the theoretical analysis.

• 전력전자학회논문지
• /
• 제17권3호
• /
• pp.230-237
• /
• 2012

This paper proposes an active-clamp ac-dc converter with direct power conversion that has a simple structure and achieves high efficiency. The proposed converter is derived by integrating the step-down ac chopper and the output-voltage doubler. The proposed converter provides direct ac-dc conversion and dc output voltage without using any full-bridge diode rectifier. The step-down ac chopper using an active-clamp mechanism serves to clamp the voltage spike across the main switches and provides zero-voltage turn-on switching. The resonant-current path formed by the leakage inductance of the transformer and the resonant capacitor of the output-voltage doubler achieves the zero-current turn-off switching of the output diodes. The operation principle of the converter is analyzed and verified. A 500W prototype is implemented to show the performance of the proposed converter. The prototype provides maximum efficiency of 95.1% at the full load.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.259-267
• /
• 2019

An active clamp flyback (ACF) converter applies a clamp circuit and circulates the energy of leakage inductance to the input side, thereby achieving a zero-voltage switching (ZVS) operation and greatly reducing switching losses. The switching losses are further reduced by applying a gallium nitride field effect transistor (GaN-FET) with excellent switching characteristics, and ZVS operation can be accomplished under light load with boundary conduction mode (BCM) operation. Optimal design is performed on the basis of loss analysis by selecting magnetization inductance based on BCM operation and a clamp capacitor for loss reduction. Therefore, the size of the reactive element can be reduced through high-frequency operation, and a high-efficiency and high-power-density converter can be achieved. This study proposes an optimal design for a high-efficiency and high-power-density BCM ACF converter based on GaN-FETs and verifies it through experimental results of a 65 W-rated prototype.

• Journal of Power Electronics
• /
• 제15권5호
• /
• pp.1200-1206
• /
• 2015

This paper proposes an actively clamped two-switch flyback converter. Compared to the conventional two-switch flyback converter, the proposed two-switch flyback converter operates with a wide duty cycle range. By using an active-clamp circuit, the proposed converter achieves zero-voltage switching for all of the power switches. Zero-current switching of an output diode is also achieved. Thus, compared with the conventional converter, the proposed converter realizes a higher efficiency with an extended duty cycle. The performance of the proposed converter is verified by the experimental results with use of a 1.0 kW prototype circuit.