• Journal of the Korean Ceramic Society
• /
• v.44 no.12
• /
• pp.715-719
• /
• 2007

STS444 with or without $La_{0.9}Sr_{0.1}MnO_3$ (LSM)-coating was contacted to $La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_3$ (LSCF) cathode on various electrolyte materials and the polarization resistance $(R_p)$ was measured by impedance spectroscopy. By making a symmetric half-cell and contacting only one side of the cathode with the interconnect, the effect of chromium (Cr) poisoning was separated from the aging effects. When the LSCF cathode was contacted with LSM-coated STS (stainless steel), $R_p$ of LSCF was lower than that contacted with the uncoated STS. Impedance patterns measured for the working electrode (W.E.), the counter electrode (C.E.) at $600^{\circ}C$ in air were analyzed. Normalized data of net Cr effect showed that $Ce_{0.9}Gd_{0.1}O_2$ (GDC) electrolyte is more tolerant to the chromium poisoning than $La_{0.9}Sr_{0.1}Ga_{0.8}Mg_{0.2}$ (LSGM) or 8 mol% $Y_2O_3-doped$ $ZrO_2$ (YSZ) electrolytes.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4270-4274
• /
• 2011

A method is proposed for determining chromium content in the carbon steel pipes of a nuclear power plant (NPP) to evaluate wall thinning caused by flow-accelerated corrosion (FAC). A flat file was used to obtain filings samples. To assess sampling quality, a disk form of SRM 1227 was ground with the flat file, and the amount of Cr in the filings was determined by ICP-AES. The content of chromium in the filings of SRM 1227 was estimated as six times higher than the certified value due to the contamination of chromium in the file. To eliminate chromium contamination from the file, it was coated with WC-12Co using high-velocity oxygen-fuel (HVOF) spraying systems. After obtaining filings samples using the coated file, Cr content in four types of disk-form SRMs was determined by ICP-AES. The recoveries of Cr in the disk-form SRMs were in the range of 95.4-102.6%, with relative standard deviations from 0.43 to 3.0%. The Cr contents in the filings collected from the used outlet headers of the nuclear power plants using the flat file coated were in the range of 0.11-0.19%.

• Korean Journal of Chemical Engineering
• /
• v.35 no.11
• /
• pp.2207-2219
• /
• 2018

Activated carbon (AC) was synthesized from Phoenix dactylifera stones and then modified by $CoFe_2O_4$ magnetic nanocomposite for use as a Cr(VI) adsorbent. Both $AC/CoFe_2O_4$ composite and AC were fully characterized by FTIR, SEM, XRD, TEM, TGA, and VSM techniques. Based on the surface analyses, the addition of $CoFe_2O_4$ nanoparticles had a significant effect on the thermal stability and crystalline structure of AC. Factors affecting chromium removal efficiency like pH, dosage, contact time, temperature, and initial Cr(VI) concentration were investigated. The best pH was found 2 and 3 for Cr adsorption by AC and $AC/CoFe_2O_4$ composite, respectively. The presence of ion sulfate had a greater effect on the chromium sorption efficiency than nitrate and chlorine ions. The results illustrated that both adsorbents can be used up to seven times to adsorb chromium. The adsorption process was examined by three isothermal models, and Freundlich was chosen as the best one. The experimental data were well fitted by pseudo-second-order kinetic model. The half-life ($t_{1/2}$) of hexavalent chromium using AC and $AC/CoFe_2O_4$ magnetic composite was obtained as 5.18 min and 1.52 min, respectively. Cr(VI) adsorption by AC and $AC/CoFe_2O_4$ magnetic composite was spontaneous and exothermic. In general, our study showed that the composition of $CoFe_2O_4$ magnetic nanoparticles with AC can increase the adsorption capacity of AC from 36 mg/L to 70 mg/L.

• Asian-Australasian Journal of Animal Sciences
• /
• v.23 no.2
• /
• pp.205-212
• /
• 2010

The effects of chromium (Cr), dietary crude protein (CP) level, and potential interactions of these two factors were investigated in term of energy metabolism in lambs. Forty-eight 9-week-old weaned lambs (Dorper${\times}$Small-tail Han sheep, male, mean initial body weight = 22.96 kg${\pm}$2.60 kg) were used in a 2${\times}$3 factorial arrangement of supplemental Cr (0 ${\mu}g$/kg, 400 $\mu{g}$/kg or 800 ${\mu}g$/kg from chromium yeast) and protein levels (low protein: 157 g/d to 171 g/d for each animal, or high protein: 189 g/d to 209 g/d for each animal). Blood samples were collected at the beginning and end of the feeding trial. The lambs were then sacrificed and tissue samples were frozen for further analysis. Chromium at 400 ${\mu}g$/kg decreased fasting insulin level and the ratio of plasma insulin to glucagon, but these differences were not statistically significant; in contrast, chromium at 800 ${\mu}g$/kg increased the ratio significantly (p<0.05). Protein at the high level increased plasma tumor necrosis factor $\alpha$ (TNF-$\alpha$) level (p = 0.060). Liver glycogen content was increased significantly by Cr (p<0.05), which also increased liver glucose-6-phosphatase (G-6-Pase) and adipose hormone-sensitive lipase (HSL) activity. At 400 ${\mu}g$/kg, Cr increased muscle hexokinase (HK) activity. High protein significantly increased G-6-Pase activities in both the liver (p<0.05) and the kidney (p<0.05), but significantly decreased fatty acid synthase (FAS) activity in subcutaneous adipose tissue (p<0.05). For HSL activity in adipose tissue, a Cr${\times}$CP interaction (p<0.05) was observed. Overall, Cr improved energy metabolism, primarily by promoting the glycolytic rate and lipolytic processes, and these regulations were implemented mainly through the modulation by Cr of the insulin signal transduction system. High protein improved gluconeogenesis in both liver and kidney. The interaction of Cr${\times}$CP indicated that 400 $\mu{g}$/kg Cr could reduce energy consumption in situations where energy was being conserved, but could improve energy utilization when metabolic rate was increased.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.631-632
• /
• 2006

Cr-C-Ni composites were synthesized in situ from elemental powders of Cr, Ni and C by high energy milling followed by reactive sintering. The milled powders with the grain size in nano-scale were pressed to compacts and sintered. During the following thermal treatment at first the chromium carbide was formed and then the $Cr_3C_2-Ni$ cermets were sintered in one cycle. The interface between the binder phase and the carbide grains of the in situ composite has a good bonding strength as it is not contaminated with oxidation films or other detrimental surface reactions.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.8
• /
• pp.1124-1132
• /
• 2009

A trial was conducted to study the effect of supplemental chromium (Cr) levels from a Cr-yeast source on performance, digestibility and carcass characteristics of transport-stressed lambs. Forty-eight Naemi lambs (avg. BW 31.7 kg) were transported by truck for a distance of 1,450 km. On arrival day, the lambs were randomly allocated to four groups receiving diets supplemented with 0.0, 0.3, 0.6 or 0.9 ppm Cr. Each group consisted of four separately housed replicates of three lambs each. The lambs were fed their respective diets ad libitum for 84 d (21 d stress period, followed by 63 d growing period). Road transit of lambs resulted in a decreased (p<0.001) live body weight of 8.5%. Supplementation of Cr-yeast did not alter the performance of lambs during the stress period. Linear and quadratic increases (p<0.05) were observed in DMI and ADG, respectively, with increasing supplemental Cr levels in the diets during the growing period. Values were greater (p<0.05) by 14.7% and 20.8%, respectively, for lambs fed 0.3 ppm Cr compared to control, while those fed on the other two levels were intermediate. Over the 84-d feeding period, a trend was noted towards a slight increase in loin eye area and a decrease in body wall fat thickness for lambs fed Cr supplementation compared to the control group. This study suggests that the supplementation of Cr-yeast, especially at 0.3 ppm level, is beneficial for improving the performance of growing lambs whether the animals are stressed or not.

• Journal of Power System Engineering
• /
• v.5 no.3
• /
• pp.80-87
• /
• 2001

Decorative properties of chromium depositions from oxalic acid bath containing chromium oxide and ammonium sulfate have been examined over a wide range of bath compositions and plating conditions. The obtained results from this experiment are summarized as follow: The followings were determined as a optimum conditions, bath compositions; $CrO_3\;200{\sim}250\;g/{\ell},\;H_2C_2O_4{\cdot}2H_2O\;500{\sim}700\;g/{\ell},\;(NH_4)_2SO_4\;40{\sim}120\;g/{\ell}$, and operation conditions; pH $2.0{\sim}2.5$, current density $15{\sim}250\;A/dm^2$ at bath temperature range of $30{\sim}80^{\circ}C$. Bright chromium deposits were obtained over a wide range of ammonium sulfate concentration and bath temperature. Decorative property for chromium deposition was adopted to apply stoichiometric ratio of $CrO_3$ concentration and $H_2C_2O_4{\cdot}2H_2O$.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.58-65
• /
• 1997

Work rolls used in cold rolling mills must have outstanding wear resistance and very little plastic defor- mation. Thus, these rolls require a higher surface hardness and harding to a greater depth. To meet these requirements, the rolls, in general, have basic chemical composition of 0.7 to 1.0% carbon and 1.0 to 5.0% Cr(chromium), plus a small amounts of special elements, and are subjected to intensive water quenching and tempering at low temperature to provide a surface hardness of over 90 shore. This test results are as follows. Deflection and fracture load of 5% Cr material are than those of 3% Cr material and show flat curve from surface to subsurface. It will be clear that 5% Cr work roll has a superior resisti- bility against wear and abrasion comparing with 3% Cr work roll. The improvement of wear and abrasion in 5% Cr work roll will be achieved by the large amount of wpheroidal carbide. In grindability and polish, 5% Cr work roll will be a little inferior comparing with 3% Cr work roll.

• Journal of Powder Materials
• /
• v.30 no.3
• /
• pp.233-241
• /
• 2023

In this study, we evaluated the effects of acid leaching on the properties of Cr powder synthesized using self-propagating high-temperature synthesis (SHS). Cr powder was synthesized from a mixture of Cr2O3 and magnesium (Mg) powders using the SHS Process, and the byproducts after the reaction were removed using acid leaching. The properties of the recovered Cr powder were analyzed via X-ray diffraction (XRD), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), particle size analysis (PSA), and oxygen content analysis. The results show that perfect selective leaching of Cr is challenging because of various factors such as incomplete reaction, reaction kinetics, the presence of impurities, and incompatibility between the acid and metal mixture. Therefore, this study provides essential information on the properties under acidic conditions during the production of high-quality Cr powder using a self-propagating high-temperature synthesis method.

• Composites Research
• /
• v.34 no.5
• /
• pp.311-316
• /
• 2021

In this study, TiC/steel metal matrix composites were fabricated by powder metallurgy process using Fealloy powders with 3 wt.% Cr and 10 wt.% Cr, respectively, as matrix material. Subsequently, the composite samples were heat treated by the annealing and quenching-tempering(Q-T), respectively, to understand the effect of heat treatment on the mechanical properties of the composites. The correlation between microstructure and structural strength depending on the chromium content and the heat treatment conditions was studied through tensile, compressive, and transverse rupture test and microstructural analysis. In the case of TiC/steel composite containing 10 wt.% Cr, the tensile strength and transverse rupture strength at room temperature were significantly lowered by the influence of coarse chromium carbide formed at the TiC/steel interface. On the other hand, both TiC/steel composites containing 3 wt.% Cr and 10 wt.% Cr showed much higher compressive strength of about 4 GP after quenching-tempering compared to the annealed specimens regardless of the presence of the chromium carbide.