• Journal of Photoscience
• /
• 제3권1호
• /
• pp.43-47
• /
• 1996

The 77 K emission and excitation, and room-temperature UV-visible spectra of $\Lambda$-fac[Cr(L-ala)$_3$] (ala = alanine anion) have been measured. The ten electronic transitions due to spinallowed and spin-forbidden are assigned. With the observed electronic transition energies, ligand field optimizations have been performed to determine the bonding properties of L-alanine anion toward chromium(III). The angular overlap model (AOM) parameters obtained indicate that it is electron-donating ligand which has values of e$_{\sigma}O$, e$_{\pi}O$, and e$_{\sigma}N$ slightly lower than those of glycine anion (gly). It seem that the decrease of the ligand field properties is due to steric effect of extra methyl group and inductive effect of adjacent carbonyl group.

• Bulletin of the Korean Chemical Society
• /
• 제15권2호
• /
• pp.145-150
• /
• 1994

The low temperature luminescence and excitation, room-temperature UV-visible and infrared spectra of [Cr(${\pm})chxn_3]Cl_3$ (chxn=trans-1,2-cyclohexanediamine) have been measured. It is found that the zero-phonon line in the excitation spectrum splits into two components by $47\;cm^{-1}$. The eight electronic transitions due to spin-allowed and spin-forbidden are assigned. As expected, nitrogen atoms of chxn ligand have strong ${\sigma}-donor $properties toward chromium(Ⅲ). The positions and splittings of sharp-line transitions are analyzed as a function of the Cartesian bite (${\alpha}$) and twist (${\beta}$) angles to predict the metal-ligand geometry.

• Journal of Welding and Joining
• /
• 제14권4호
• /
• pp.43-52
• /
• 1996

The plasma sprayed Cr$_{2}$C$_{2}$-NiCr coatings are widely used as wear-resistant and corrosion-resistant materials. The mechanical properties of the plasma sprayed Cr$_{2}$C$_{2}$-NiCr coatings were examined in this study. The distribution of the residual stress with the coating thickness was also examined by X-ray diffraction method. The pore in the coatings could be classified into two types ; one is the intrinsic pore originated from the spraying powder, the other is the extrinsic pore formed during spraying. During the tensile adhesion test, the fracture occurred at the interface of top coat and substrate or top coat and bond coat depending on the existence of bond coat. It was found that the compressive residual stress near the interface decreased with the increase of the top coat thickness. The tensile adhesion strength of the coating without bond coat was higher than that with bond coat, because the coating with bond coat has higher horizontal crack density near the interface between bond coat and top coat.

• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.141-147
• /
• 2003

Sputter-deposited Nb-Al-Cr alloys. $3-5{\mu}m$ thick, have been prepared on quartz substrates as oxidation-and sulfidation-resistant materials at high temperatures. The oxidation or the alloys in the $Ar-O_2$ atmosphere of an oxygen partial pressure of 20 kPa follows approximately the parabolic rate law, thus being diffusion controlled. Their oxidation rates are almost the same as or even lower than those ofthc typical chromia-forming alloys. The multi-lavered oxide scales are formed on the ternary alloys. The outermost layer is composed of $Cr_2O_3$, which is"mainly responsible for the high oxidation'resistance of these alloys. In contrast to sputter-deposited Cr-Nb binary alloys reported previously, the inner layer is not porous. TEM observation as well as EDX analysis indicates that the innermost layer is a mixture of $Al_2O_3$ and niobium oxide. The dispersion of $Al_2O_3$ in niobium oxide may be attributable to the prevention of the formation of the porous oxide layer. The sulfidation rates of the present ternary alloys arc higher than those of the sputter-deposited Nb-AI binary alloys, but still several orders of magnitude lower than those of conventional high temperature alloys. Two-layered sulfide scales are formed, consisting of an outer $Al_2S_3$ layer containing chromium and an inner layer composed of $NbS_2$ and a small amount of $Cr_2S_3$. The presence of $Cr_2S_3$ in the inner protective $NbS_2$ layer may be attributed to the increase in the sulfidation rates.

• 자원환경지질
• /
• 제38권6호
• /
• pp.657-662
• /
• 2005

Extractions fro fertilizer and soil samples were performed to yield the operationally defined fractions 'soluble' chromate (extractable with $NH_4NO_3$), 'exchangeable' chromate (extractable with phosphate buffer pH 7.2), and these results were compared with the data obtained by extractions with ammonium sulfate, borate buffer pH 7.2, saturated borax pH 9.6, and polyphosphate (Graham's salt). In order to maintain the pH of extractant solution about constant, the concentration of extractant buffer had to be raised to at least 0.5 M. The results strongly depended on the kind of extractant, and the solid: liquid ratio. For most of the samples investigated, the extraction efficiency increased in the order borate-sulfate-nitrate-phosphate. Whereas the recovery of $K_2CrO_4\;and\;CaCrO_4$ added to the samples of basic slags prior to the extraction was about complete, the recovery of added $PbCrO_4$ was highly variable. In soil extracts, the color reaction was interfered from co-extracted humics, which react with the chromate in weak acid solution during the time period necessary for color reaction (1 hour). However, this problem can be overcome by standard addition and subtraction of the color of the extractant solution. In soil extract of about pH < 7, organic material reduced chromate during the extraction period also, and standard addition of soluble chromate is recommended to prove recovery and the stability of chromate in the samples. In admixtures of soils and basic slags, results for hexavalent chromium were lower than from the mere basic slags. This effect was more pronounced in phosphate than in nitrate extracts. As a proficiency test, samples low in organic carbon from contaminated sites in Hungary were tested. The results from $NH_4NO_3$ extracts satisfactorily matched the results of the Hungarian labs obtained from $CalCl_2$ extractants.

• 공업화학
• /
• 제10권8호
• /
• pp.1104-1108
• /
• 1999

본 연구에서는 피혁분에서 크롬을 제거하여 여러 면으로 활용 가능한 단백질자원을 얻고자 하였다. 피혁분은 크롬이 콜라겐사이에 가교결합을 하여 크롬-콜라겐염(Cr-collagenate)을 형성하므로 1단계 공정에서 $Ca(OH)_2$용액에 침지(steeping)하여 팽윤(swelling)-팽창(plumping)시켜, $H_2SO_4$용액으로 크롬을 용출시켰다. 2단계 공정에서 NaOH용액으로 팽윤-팽창시키고 $H_2O_2$용액으로 용해도가 큰 Cr(VI)으로 산화하여 $H_2SO_4$용액으로 용출시켜 탈 크롬을 마무리하였다. 1단계 공정에서 $3%-Ca(OH)_2$용액, $0.8%-H_2SO_4$용액으로 2단계 공정에서 0.1%-NaOH용액, $3%-H_2O_2$용액, $1%-H_2SO_4$용액으로 순차적으로 침지하여 효율적으로 완전 탈 크롬을 할 수 있었다. 완전 탈 크롬된 피혁분에는 수분 10.68%일 경우, 조 단백질이 79.81% 함유하였으며, 각 공정의 침지용액들은 3회까지 반복 사용하여도 완전히 크롬을 제거할 수 있었다.

• Journal of Welding and Joining
• /
• 제19권5호
• /
• pp.506-511
• /
• 2001

Weld overlay has been developed to improve the property of material surface which is used in the severe environment. Weld overlay is the process which uses an arc heat and welds different composition of alloy on the substrate for the improvements of heat resistance and wear resistance. Weld overlay has a lot of advantages which are high hardness, good processing efficiency, easy controlling of layer thickness, good quality and low cost. In this study, weld overlay was performed by MAG welding on the base metal(SS400) with filler metal which contain composite powders(Cr+C+Mn+Mo+NbC) and solid wire(JIS-YGW11). Characterization of hardness and wear resistance were analyzed by EDS, EPMA, XRD and observations of microstructure were performed to investigate characteristics of overlays. The experimental results of overlaid specimens manufactured with Cr+C+Mn+Mo+NbC powders were obtained as fellows. ${\alpha}-phase$, M(Fe, Cr)3C and NbC of overlays were increased with decreasing the wire feed rates and increasing powder feed rates. Also the hardness of overlays were increased and the specific wear were decreased.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.178-182
• /
• 2011

The Rutile - type brown pigments doped with chromium were synthesized. Samples of $Ti_{1-x}Cr_xO_2$ ($0.02{\leq}X{\leq}0.08$) were synthesized by the solid state method. Solid solution limit of Cr contents to the rutile structure and its coloration were studied. Optimum composition was investigated accordingly. The characteristics of synthesized pigments were analyzed by XRD, SEM, Raman spectroscopy and UV. As a result, single phase of Rutile was observed from $1000^{\circ}C$ by XRD. The maximum limit of solid solution was 0.06 mole $Cr_2O_3$. The glazed sample showed brown color, and the value of CIE $L^*a^*b^*$ was $L^*$ 33.27, $a^*$ 10.64, $b^*$ 20.84.

• Corrosion Science and Technology
• /
• 제3권5호
• /
• pp.179-186
• /
• 2004

Recently the alloy development of duplex stainless steel has been done. On this study we studied the effect of the corrosion resistance according to the composition variety of C, Cr, N in the alloy elements of duplex stainless steel. materials which have below 0.1[mm/year] corrosion rate enable to use for corrosion-resisting materials, generally. On this experiment we inspected the effect of the composition variety of C, Cr, N in duplex stainless steel and the heat treatment, which the condition was the water quenching after the heat treatment for 1hr. The experiment was done on the basis of the ASTM G48A test, Critical pitting temperature(CPT), and ASTM G-61(Electrochemical tests for cyclic polarization).

• 한국표면공학회지
• /
• 제50권4호
• /
• pp.289-295
• /
• 2017

Detection of $CO_2$ gas in both indoor and outdoor atmospheres is now becoming an important issue because of greenhouse effect and climate crisis. In this study, gas sensors based on $SnO_2-Cr_2O_3$ composite nanofibers were fabricated by the electrospinning method to detect $CO_2$ gas. The gas sensors showed a response to ppm level of $CO_2$ gas from room temperature to $200^{\circ}C$ while the highest response was observed at $150^{\circ}C$. The gas response is enhanced by the catalytic property of $Cr_2O_3$. Selective $CO_2$ detection is obtained through the chemical reaction of $Cr_2O_3$ to chromium carbonate. All the results suggest the $SnO_2-Cr_2O_3$ composite material is promising for the use of $CO_2$ gas sensors.