• 한국해양공학회지
• /
• 제3권2호
• /
• pp.625-625
• /
• 1989

To check technical improvement in the soundness and strength of 12% Cr steel rotor, a 25 tons of rotor with 65 tons of ingot was made in real size and was cut to pieces to take test samples, and the various mechanical tests such as impact, tensile, creep, and fatigue were carried out. The strengths are compared with those of 1% Cr-Mo-V rotor of same size. Microstructures of the samples are examined and reviewed. The results can be summarized as follows. 1) Fracture appearance transition temperatures are 80.deg. C at the center part and 60.deg. C near surface of 12% Cr rotor, and 8.deg. C near surface of 1% Cr-Mo-V rotor. 2) Comparative rapid softening occurs at higher temperatures above 600.deg. C for 12% Cr steel and 550.deg. C for 1% Cr-Mo-V steel in tension tests. 3) Fatigue crack propagation rate of 12% Cr steel is almost same as that of 1% Cr-Mo-V steel at the same corresponding surface part of the rotors. The crack growth rate of center part of 12% Cr rotor is faster than near surface part of the rotor, and the crack growth rate at the load condition of R=0.04 is slower than that of the load condition of R=0.5 for both 12% Cr steel and 1% Cr-Mo-V steel. 4) Crack growth rate of radial direction near surface of 12% Cr rotor is faster than that of transverse direction at the same part because of the difference in residual stresses. 5) Both creep and fatigue strengths of 12% Cr steel are superior to those of 1% Cr-Mo-V steel and the difference is thought the effect of climb and glide controlled creep by solid solution of alloying elements and dispersion of carbides.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권4호
• /
• pp.8-14
• /
• 2004

카드뮴과 크롬으로 오염된 토양에 EDTA 와 붕산 혼합용출제를 주입하는 토양수세법(Soil flushing)을 적용 시 최적운전조건을 결정하기 위해서 여러 가지 반응조건에서 카드뮴과 크롬의 제거효율을 측정하였다. 카드뮴의 제거효율은 EDTA 농도가 0.001M에서 0.1M로 증가하면서 $73.2\%$에서 $98.5\%$로 $25.3\%$증가하였으며, 크롬의 제거효율은 붕산의 농도가 0.001M에서 0.1M로 증가하면서 $59.2\%$에서 $100\%$로 $40.8\%$가 증가하였다. 서로 다른 특성을 갖고 있는 카드뮴과 크롬 오염토양에 pH가 3,5,7로 조정된 0.005M EDTA 와 0.005M 붕산 혼합용출제를 주입하여 제거효율을 측정한 결과 카드뮴의 제거효율은 pH가 3에서 7로 증가함에 따라 $92.4\%$에서 $80.9\%$로 감소하였으며, 크롬의 제거효율은 pH 5에서 $70.4\%$로 가장 높았다. pH 5에서 EDTA&붕산 혼합용출제의 농도비를 변화시키면서 카드뮴의 제거효율을 측정한 결과 [EDTA]:[붕산]=0.01M:0.1M에서 가장 효율적이며, 크롬의 제거효율은 [붕산] 주입농도가 0.1M이상일 때 가장 효율적인 것으로 조사되었다. 광산지역과 산업지역에서 채취한 실제오염토양에 적용한 실험에서도 비슷한 결과를 얻었다.

• Carbon letters
• /
• 제22권
• /
• pp.60-69
• /
• 2017

Nitrogen-doped carbon nanosheets with a developed porous structure were prepared from polyurethane foams by hydrothermal carbonization following $ZnCl_2$ chemical activation. Scanning electron microscopy, thermogravimetric analysis, Fourier transform infrared spectroscopy, solid state $^{13}C$ nuclear magnetic resonance (NMR) spectra and X-ray photoelectron spectroscopy were used to characterize the nitrogen-doped carbon nanosheet structure and composition. The removal of Cr(VI) by the N-doped carbon nanosheets was investigated. The results showed that the maximum removal capacity for chromium of 188 mg/g was found at pH=2.0 with PHC-Z-3. pH had an important effect on Cr(VI) removal and the optimal pH was 2.0. Moreover, amino groups and carboxyl groups in the nitrogen-doped carbon nanosheet played important roles in Cr(VI) removal, and promoted the reduction of Cr(VI) to Cr(III).

• 한국재료학회지
• /
• 제10권7호
• /
• pp.489-492
• /
• 2000

0.5%C-25.0%Cr-1.0%Si(합금1), 0.5%C-5.0%Cr-1.0%Si(합금2) 및 2.0%C-5.0%Cr-1.0%Si(합금3)의 3종류 크롬백주철에 있어서 기지조직 및 탄화물에 분푀도는 Cr 및 Si의 거동을 연구하였다. 15kg 용량의 고주파 유도용해로에 선철, 고철, Fe-Cr, Fe-Si 등을 장입시켜 용해시킨후 슬래그를 제거시키고 $1550^{\circ}C$에서 펩 주형에 주입시킨후 실온까지 냉각시켜 SEM으로 응고조직을 관찰하였으며 EPMA분석을 통하여 Cr 및 Si 의 분포거동을 관찰하였다. 합금1의 경우 초정으로 $\delta$페라이트가 정출후 $\delta$페라이트와 용액의 입계에서 $\delta$페라이트와 $M_7C_3$탄화물이 공정으로 정출하였으며 합금2의 경우 용액에서 초정으로 거의 $\delta$페라이트가 정출된 수 극히 일부분만이 $\delta$페라이트와 $M_7C_3$탄화물의 공정으로 정출하였다. 반면 합금 3의 경우 오스테나이트가 초정으로 정출된 후 오스테나이트와 $M_3C$탄화물이 공정으로 정출하였다. Cr은 주로 $M_7C_3$ 및 $M_3C$탄화물에 , 그리고 Si는 기지조직에 선택적으로 분배되었으며 Cr의 기지조직에 대한 분배계수는 0.56-0.68, 그리고 Si는 1.12-1.28의 범위에 걸쳐있었다. 또한 Cr의 기지조직에 대한 분배계수는 C 함량이 2.0%일때가 0.5%의 경우보다 낮았으며 $M_7C_3$탄화물내의 Cr 함량은 Cr함량이 25.0% 일때가 5.0%의 경우보다 높은값을 나타내었다. 나타내었다.

• 한국해양공학회지
• /
• 제24권5호
• /
• pp.67-74
• /
• 2010

Chromate conversion coating is a coating technique used to passivate aluminum, zinc, cadmium, copper, silver, magnesium, tin, and their alloys to slow corrosion. The process uses various toxic chromium compounds, which may include hexavalent chromium. The industry is developing less toxic alternatives in order to comply with substance restriction legislation, such as RoHS. One alternative is to develop a Cr-free coating solution. In this study, eco-friendly, Cr-free solutions (urethane solution S-700, organic/inorganic solution with Si LRO-317) were used. Test specimens were dried in a drying oven at $190^{\circ}C$ for 3, 5, 7, and 9 minutes. Corrosion resistance was evaluated using a salt spray test for 72 hours. The results show that the optimum corrosion resistance was achieved at $190^{\circ}C$ for five minutes for EGI and three or five minutes for HDGI, respectively. The adhesive properties of the two types of coating solutions were superior regardless of drying time.

• 한국산학기술학회논문지
• /
• 제14권11호
• /
• pp.6039-6046
• /
• 2013

Cr(VI)-헤테로고리 착물[Cr(VI)-2-methylpyrazine]를 합성하여, 적외선 분광광도법(IR), 유도결합 플라즈마(ICP)등으로 구조를 확인하였고, 여러 가지 용매 하에서 Cr(VI)-2-methylpyrazine를 이용하여 벤질 알코올의 산화반응을 측정한 결과, 유전상수(${\varepsilon}$) 값이 큰 용매 순서인 시클로헥센 < 클로로포름 < 아세톤 < N,N-디메틸포름아미드 용매 하에서 높은 산화반응성을 보였다. 산 촉매(HCl)를 이용한 DMF 용매 하에서 Cr(VI)-2-methylpyrazine은 벤질 알코올(H)과 그의 유도체들(p-$CH_3$, m-Br, m-$NO_2$)을 효과적으로 산화시켰다. 전자받개 그룹들은 반응 속도가 감소한 반면에 전자주개 치환체들은 반응속도를 증가시켰고, Hammett 반응상수(${\rho}$) 값은 Cr(VI)-2-methylpyrazine= -0.65(308K) 이였다. 본 실험에서 알코올의 산화반응 과정은 먼저 크로메이트 에스테르 형성과정을 거친 후, 속도결정단계에서 수소화 전이가 일어나는 메카니즘임을 알 수 있었다.

• 열처리공학회지
• /
• 제22권5호
• /
• pp.267-274
• /
• 2009

Titanium Chromium Nitrided (TiCrN) coatings were deposited on stainless steel 316 L and Si (100) wafer by inductively coupled plasma assisted D.C. magnetron sputtering at the various sputtering power on Cr target and $N_2/Ar$ gas ratio. Increasing the sputtering power of Cr target, XRD patterns were changed from TiCrN to nitride $Cr_2Ti$. The maximum hardness was $Hk_{3g}$ 3900 at $0.3\;N_2/Ar$ gas ratio. The thickness of the TiCrN films increased as the Cr target power increased, and it showed over $Hk_{5g}3100$ hardness at 100 W, 150 W. TiCrN films were deposited by the ICP assisted DC magnetron sputtering shown good wear resistance as the $N_2/Ar$ gas ratio was 0.1, 0.3.

• Bulletin of the Korean Chemical Society
• /
• 제26권6호
• /
• pp.903-908
• /
• 2005

The sharp-line absorption and emission spectra of $(H_{13}O_6)${$trans-[Cr(Me_2tn)_2Br_2]$}$_2Br_2(ClO_4)\;(Me_2$tn = 2,2-dimethyl-1,3-diaminopropane) have been measured between 13000 $cm^{-1}$ and 16000 $cm^{-1}$ at 5 K. The 298 K infrared and visible absorption spectra have also been measured. The nine electronic bands due to spin-allowed and spin-forbidden transitions were assigned. Using observed transitions, a ligand field analysis has been performed to probe the ligand field properties of coordinated atoms in the title chromium(III) complex ion. The zero-phonon line in the sharp-line absorption spectrum splits into two components by 286 $cm^{-1}$, and the large $^2E_g$ splitting can be reproduced by the modern ligand field theory. It is confirmed that nitrogen atoms of the Me2tn ligand have a strong $\sigma$-donor character, but the bromide has weak $\sigma$- and $\pi$-donor properties toward chromium(III) ion.

• Corrosion Science and Technology
• /
• 제22권4호
• /
• pp.252-256
• /
• 2023

The galvanostatic polarization technique was used to accelerate corrosion in high chromium cast iron (HCCI) immersed in a simulated slurry solution of 0.1 mol dm^-3 H₂SO₄, 0.05 mol dm^-3 HCl, and 10 wt% SiC. The HCCI contained 27 wt% of Cr and 2.8 wt% of C, and its microstructure mainly comprised austenitic and carbide phases. A two-electrode system using a dense carbon rod and the HCCI sample was employed for the galvanostatic polarization by applying an anodic current for 24 hours. The corrosion rate increased upon applying the anodic current, but the increase was not significant, particularly for current densities higher than 10 µA cm^-2. Following polarization, the corrosion morphology revealed that the anodic current accelerated surface corrosion in the HCCI; however while the depth of the corroded area increased, the increase was not substantial. The propagation behavior of the anodic current and its impact on corrosion were further discussed.

• 대한치과기공학회지
• /
• 제40권2호
• /
• pp.63-69
• /
• 2018

Purpose: The purpose of this study is to investigate the non-precious metal core materials used in the dental laboratory to fabricate the implant superstructure by CAD / CAM method. And to observe and compare the morphology and distribution of the osteoblasts in relation to implant osseointegration. Methods: In this study, the mandibular right first molar tooth model was selected as an international standard to produce a single core. Using this model, the impression was made with the silicone rubber, the tooth model was scanned, and a single core was designed and 5-axis milling was performed. The materials used were Cobalt-Chromium and Nickel-Chromium, and the cores for dental implant top structures were fabricated according to the procedures of the dental labs. After the fabrication, the marginal area of the core was separated and cell culture experiment was performed. The osteoblast cells used MC3T3-E1, which is currently widely used. For morphological analysis of osteoblasts, cells were posttreated and observed using CLSM (Confocal Laser Scanning Microscope) and compared. Results: The cell adhesion behavior of the specimen surface measured by CLSM was uniformly distributed in specimen A (Cobalt-Chromium) than in specimen B (Nickel-Chromium). The distribution and changes of the cells were different in the two specimens. Conclusion : It is possible to confirm that specimen A (Cobalt-Chromium) is suitable for the living body through adhesion and proliferation of osteoblasts related to implant osseointegration in the non-precious metal superstructure used after implantation. It is considered that it is preferable to use Co-Cr when fabricating the superstructure.