• Journal of Power Electronics
• /
• v.12 no.6
• /
• pp.992-1002
• /
• 2012

In this paper, the series chopper based power train for electric vehicle is proposed for aiming the increase of one battery charge driving distance. Both the motor test bench based experiments and the chassis dynamo based experiments are tested and then analyzed for EV driving performance that the proposed power train with SAZZ chopper and Quasi-PAM control scheme is compared with or without the series chopper. It is confirmed through two kinds of experimental analyses that the series chopper power train for EV can be useful to extend the driving distance if the high efficiency and the low weight of chopper are satisfied.

• 전기의세계
• /
• v.31 no.3
• /
• pp.226-234
• /
• 1982

DC choppers are usually used to control the DC motor by varying the average value of DC input voltage to the DC motors. In this paper, a chopper circuit is suggested and reconstructed by replacing the free-wheeling diode with the parallel capacitor in the conventional ones. It is demonstrated that this chopper circuit with capacitor can reduce the ripples of the output voltage and current in contrast to those of the chopper with diode, and it can be controlled the output waveforms smoothly at high power demand.

• Proceedings of the KIPE Conference
• /
• 2007.11a
• /
• pp.115-117
• /
• 2007

This paper is analyzed for DC-DC chopper performance of high efficiency added in electric isolation. The general converters of high efficiency are made that the power loss of the used switching devices is minimized. To achieve high efficiency system, the proposed chopper is constructed by using a partial resonant circuit. The control switches using in the chopper are operated with soft switching for a partial resonant method. The control switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the efficiency of chopper is high. And the proposed chopper is added in a electric isolation. When the power conversion system is required to electric isolation, the proposed chopper is adopted with system development of high efficiency. The soft switching operation and the system efficiency of the proposed chopper is verified by digital simulation and experimental results.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.547-551
• /
• 1987

New chopper circuits for decoupled operation of the dc series motor are presented. These new choppers are capable of controlling field current completely separately, while offering capability of bidirectional armature energy flow. To develop the chopper circuit, with minimum number of switching elements, the complete family of possible conduction circuits are systematically investigated. Then one or two quadrant chopper circuits which offer the desired operations are synthesized from the resulting conduction circuits. Finally, the developed chopper circuits are completely analyzed. The details of operation of the chopper circuits are also fully described.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.10
• /
• pp.832-839
• /
• 1989

New chopper circuits for decoupled operation of the dc series motor are presented. These new choppers are capable of controlling field current completely separately, while offering capability of bidirectional armature energy flow. To develop the chopper circuit with minimum number of swithcing elements, the complete family of possible conduction circuits are systematically investigated. Then one or two quadrant chopper circuits which offer the desired operations are synthesized from the resulting conduction circuits. Finally, the developed chopper circuits are analyzed in the steady state. The details of operation of the chopper circuits are also fully described and experimented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.4
• /
• pp.177-182
• /
• 2003

We have proposed the dimming controller using the AC chopper technique. The AC chopper changes the amplitude of the input source voltage with the same frequency. The conventional dimming controller is operated by controlling voltage phase with the triac. It has bad characteristics of the input current THD and the input power factor But the dimming controller using the ac chopper technique has a low current THD and a good power factor. The developed dimming controller is consist of the IGBT and the low pass filter. The system is operated by the variation circuit of the input source voltage and the microprocessor.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.52 no.4
• /
• pp.177-177
• /
• 2003

We have proposed the dimming controller using the AC chopper technique. The AC chopper changes the amplitude of the input source voltage with the same frequency. The conventional dimming controller is operated by controlling voltage phase with the triac. It has bad characteristics of the input current THD and the input power factor But the dimming controller using the ac chopper technique has a low current THD and a good power factor. The developed dimming controller is consist of the IGBT and the low pass filter. The system is operated by the variation circuit of the input source voltage and the microprocessor.

• Journal of IKEEE
• /
• v.13 no.4
• /
• pp.82-88
• /
• 2009

This paper is analyzed for a step up-down DC/DC chopper of high efficiency added electric isolation. The converters of high efficiency are generally made that the power loss of the used semiconductor switching devices is minimized. To achieve high efficiency system, the proposed chopper is constructed by using a partial resonant circuit. The control switches using in the chopper are operated with soft switching by partial resonant method. The control switches are operated without increasing their voltage and current stresses by the soft switching technology. The result is that the switching loss is very low and the efficiency of the chopper is high. The proposed chopper is also added electric isolation which is used a pulse transformer. When the power conversion system is required electric isolation, the proposed chopper is adopted with the converter system development of high efficiency. The soft switching operation and the system efficiency of the proposed chopper are verified by digital simulation and experimental results.

• Korean Journal of Food Science and Technology
• /
• v.23 no.2
• /
• pp.212-216
• /
• 1991

Whipping and bandaekee making process were known to a bottle neck for yukwa(deep-fat fried waxy rice snack) making process. For mechanization of the process, a machine was designed and manufactured with conveyer. Some functions of the machine were compared. The continuous whipping and bandaekee making machine was developed by modification of chopper. The chopper was substituted with specially designed plates and die. The newly designed plates were suitable for continuous whipping of dough and making bandaekee without showing any quality different at the final stage. The width and thickness of bandaekee could be controlled by speed of conveyer. The proper conveyer speed was 87.3 mm/sec when amount of extrudate of dough was 221.8 g/sec (MW 51%) from chopper. A shape of knife and plate among components of chopper was not seriously influenced on whipping effect. Expectable thickness of bandaekee for good quality was $3.0{\sim}3.5\;mm$. The number of passing through the chopper was not effected on yukwa quality·but no whipping showed bulky volume with too soft texture.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.3
• /
• pp.171-178
• /
• 1987

A study of two phase chopper system with four separate groups of DC motors in powering. A novel two phase chopper system with four separate groups of DC motors which applies the principles of two phase chopper with two separate groups of DC motors is dealt with this article. The main circuit consists of eight sets of chopping parts, four diodes and four separate groups of DC motors. Four groups of DC motors are driven through the series and parallel connections to each other in accordance with the operating conditions of the choppers. Although the proposed chopper circuit requires more circuit elements than the conventional two phase chopper system with combined output or two phase chopper system with two separate groups of DC motors, it has the following advantages` (1). It is possible to drive twice as much motors as conventional system does, using esisting receiving-and equipments and motors. (2). It is possible to control load voltage continuously from 0 to source voltage by changing time-ratio from 0 to 1. (3). Load current division becomes equalized. Therefore it is possible to drive not only series motors but also shunt and separately exited motors. (4). When smoothing reactor L is small, harmonic components of the proposed circuit is not so large. Therefore, the value of L can be determined from viewpoints of allowable value of ripple-ratio and current unbalance factor.