• Journal of Electrochemical Science and Technology
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2023

Sodium hydroxide solutions are often employed as sterilization agents in the pharmaceutical industry. Here, the chloride content is considered as a critical impurity. In this study, an electrochemical method was developed to remove chloride ions (Cl^-) through the oxidative deposition of AgCl on a Ag anode. The Cl^- content in the commercially available 50% w/w NaOH solution employed was approximately 100 mg Cl^-/kg NaOH. As the OH^- content is approximately 18,000 times higher than the Cl^- content, the formation of AgCl may be expected to be thermodynamically less favorable than the formation of Ag₂O. However, activation energies for AgCl and Ag₂O formation have been reported to be approximately 3.8 and 31.2 kJ/mol, respectively, and indicate that AgCl formation is favored. AgCl can be selectively produced by controlling the anode potential. Here, the Cl^- concentration was reduced to less than 50 mg Cl^-/kg NaOH when an anode potential of 0.18 or 0.19 V vs. Hg/HgO (reference electrode) was applied for one hour at 50℃. XRD analysis and visual monitoring of the Ag anode confirmed the oxidative deposition of AgCl on the anode surface as well as the electrochemical desalination of the concentrated NaOH solution.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.135-151
• /
• 1982

In order to investigate the effectiveness of Osmose process for the practical treatment of wood this study has been made using water soluble preservatives such as Malenit and chromated zinc chloride. The results obtained in this investigation are as follows: 1. The penetration of Malenit in sapwood has been observed deeper than that of chromated zinc chloride for all species tested in this investigation. 2. The penetration of preservatives applied in soft wood, ie. Pinus densiflora and Larix leptolepis has been observed better results than that of hard wood, i.e., Quercus accutissima and Carpinus laxiflora. 3. The longer stack covering, despite of preservatives applied and size of wood tested, has given better penetration for all species tested, and the fastest diffusion has been occured in 15 days from they day started. Following after 15 days diffusion had gradualy become slower. 4. The length of time needed for effective penetration has taken 45 days for all species tested, reaching twenty millimeters (20mm) in depth in case of Malnit, that means also more than 50% of penetration into sapwood portion. However it has taken 45 days fer Pinus densiflora and Larix leptolepis, reaching fifteen millimeters (15mm) and 60 days for Quercus accutissima and Carpinus laxiflora, reaching same fifteen millimeters in case of chromated zinc chloride, that means also less than 50% (except 50% for Larix) of penetration into sapwood portion. 5. Deeper penetration of preservatives from the wood surface has been observed in the larger wood than the smaller wood for all species tested, although the penetration ratio between the width of sapwood and the length penetrated has been observed smaller in larger wood than smaller wood. 6. The relation between moisture content of wood and the penetration of preservatives into wood tested has shown the linear regression, that is, the more moisture content brought the deeper penetration. 7. Following the result obtained at this investigation osmose process with Malenit applied has indicated as a useable process for the none pressure treatment of wood.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.2
• /
• pp.120-127
• /
• 2011

Purpose: The purpose of this study was to examine the effects of chromium chloride addition on coloration, mechanical property and microstructure of 3Y-TZP. Materials and methods: Chromium chloride was weighed as 0.06, 0.12, and 0.25 wt% and each measured amount was dissolved in alcohol. $ZrO_2$ powder was mixed with each of the individual slurry to prepare chromium doped zirconia specimen. The color, physical properties and microstructure were observed after the zirconia specimen were sintered at $1450^{\circ}C$. In order to evaluate the color, spectrophotometer was used to analyze the value of $L^*$, $C^*$, $a^*$ and $b^*$, after placing the specimen on a white plate, and measured according to the International Commission on Illumination (CIE) standard, Illuminant D65 and SCE system. The density was measured in the Archimedes method, while microstructures were evaluated by using the scanning electron microscopy (SEM) and XRD. Fracture toughness was calculated Vickers indentation method and indentation size was measured by using the optical microscope. The data were analyzed with 1-way ANOVA test (${\alpha}$ = 0.05). The Tukey multiple comparison test was used for post hocanalysis. Results: 1. Chromium chloride rendered zirconia a brownish color. While chromium chloride content was increased, the color of zirconia was changed from brownish to brownish-red. 2. Chromium chloride content was increased; density of the specimen was decreased. 3. More chromium chloride in the ratio showed increase size of grains. 4. But the addition of chromium chloride did not affect the crystal phase of zirconia, and all specimens showed tetragonal phase. 5. The chromium chloride in zirconia did not showed statistically significant difference in fracture toughness, but addition of 0.25 wt% showed a statistically significant difference (P<.05). Conclusion: Based on the above results, this study suggests that chromium chlorides can make colored zirconia while adding in a liquid form. The new colored zirconia showed a slight difference in color to that of the natural tooth, nevertheless this material can be used as an all ceramic core material.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.67-76
• /
• 2013

In this study, the inhibitive effect of electrochemical treatment subjected to fresh and hardened concrete and literature reviews in terms of the treatment were performed. In hardened concrete, chloride ions are mixed during casting to destroy the passivity of steel, and then the current was provided for 2 weeks with 250, 500 and $750mA/m^2$. After completion of electrochemical treatment, the extraction of chloride ions was quantified and repassivation of steel was observed. Simultaneously, the equated levels of current density for 2 weeks were applied to fresh concrete. Steel-concrete interface in concrete was observed by BSE image analysis and the concrete properties in terms of the diffusivity of chloride ions and the resistance of steel corrosion was measured. As the result, electrochemical treatment is very effectiveness to rehabilitate the passive film on the steel surface and 63-73% of chloride ions in concrete were extracted by the treatment. As the treatment was applied to fresh concrete, the resistance of steel corrosion was improved due to the densification of $Ca(OH)_2$ layers in the vicinity of steel. However, an increase in the current density resulted in an increase in surface chloride content of concrete.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.283-293
• /
• 2015

In order to evaluate corrosion resistance of steel fiber-reinforced concrete, accelerated chloride migration and surface resistivity tests were conducted. In addition air content of fresh concrete, compressive strength and water absorption were measured for investigating fundamental characteristics of concrete. Two different water-cement ratios(0.44, 0.5) and three steel fiber contents(0.25%, 0.5%, 1%) were considered as variables. Note that all specimens cast with same compaction work. As a results, corrosion resistance decreased as steel fiber contents increased regardless of water-cement ratio when the concrete was compacted with same amount of work done. However, for concrete with same steel fiber content, the lower water-cement ratio showed the better corrosion resistance. It is found that enhancement of fluidity and enough compaction should be done for corrosion resistance of SFRC.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.4
• /
• pp.219-228
• /
• 1996

Neutral Zinc Electroplating(NZE) utilizing the electrolyte of pH 6 to 8 has advantages in waste treatment and the protection of equipment. NZE is beneficially used in chromating treatment, but the limiting current density and the current efficiency are low. Therefore this study is investigated to analyse the characteristics of NZE and to obtain high current density and current efficiency. The deposition potential of zinc in the NZE bath is about 110mV, which is lower than acidic bath. The current density possibily increases up to 60A/d$\m^2$ in lower complexing agent content and pH 6. More than 90% of cathodic current efficiency was obtained in NZE bath. The NZE morphology shows smaller grains than acidic bath. The addition of 4$m\ell$/1 second brightener gives finer morphology. As pH becomes higher, (002) plan decreases and (100), (101) and (110) planes increase in the no additives solution.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.2
• /
• pp.211-216
• /
• 2018

Separation technology combining adsorption and membrane is expected to be applied in many fields such as water treatment. In this fusion technique, a functional carbon membrane having a carbon whisker grown on the surface of the membrane was developed to inhibit membrane fouling, which is a problem in the membrane separation process. In this study, to elucidate the mechanism of manufacturing the functional carbon membrane, the membrane was pretreated with the polymer latex of each mixing ratio and the membrane was formed by the CVD (Chemical Vapor Deposition) method. The membrane was analyzed by scanning electron microscope (SEM), CHN analyzer (Elemental Analyzer), and X-ray diffraction (XRD). As a result, the diameter and density of carbon whiskers were higher in case of polyvinyl di-chloride (PVdC): polyvinyl chloride (PVC) = 4.5: 55. It seems possible to control the diameter and density of the carbon whiskers according to the hydrogen content of the polymer latex.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.78-83
• /
• 2010

On the paved track, the ballast is used as aggregate for the filling layer using the pre-packed concrete technique. The most important condition of aggregate is adhesive strength with mortar. To satisfy this condition, surface of aggregate should be cleaned by water or others. In a paved-track method to be introduced domestically, an environment-friendly dry-washing technology which will replace the water-washing method has been developed. A dry-washing method was designed to blast the crushed weight material with a diameter of 0.3~0.5mm at high pressure to peel the surface of the aggregate. The study was intended to enhance the washing efficiency of dry-blasting technology and to that end, the tests including blasting material, content of fine aggregate depending on time elapsed, content of chloride, LA abrasion rate and compressive strength were conducted to recommend the efficient washing material and the process.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.169-173
• /
• 2015

Metallocene was supported on the silica, which was functionalized with aminosilanes such as aminopropyltrimethoxysilane (1NS) or N-[3-(trimethoxysilyl)propyl]ethylenediamine (2NS), and ionic liquids such as 1-butyl-4-methylpyridinium chloride (Cl), tributylmethylammonium chloride (Amm), benzyldimethyltetradecylammonium chloride (Ben), 1-butyl-1-methylpyrrolidinium chloride (Pyr), and then ethylene polymerizations were performed. The Zr contents of $SiO_2/1NS/IL/(n-BuCp)_2ZrCl_2$ and $SiO_2/2NS/IL/(n-BuCp)_2ZrCl_2$ were lower than those of only aminosilane-treated silicas. However, the polymerization activity of $SiO_2/1NS/IL/(n-BuCp)_2ZrCl_2$ was higher than that of $SiO_2/1NS/(n-BuCp)_2ZrCl_2$. The polymerization activity of $SiO_2/2NS/IL/(n-BuCp)_2ZrCl_2$ was lower than that of $SiO_2/2NS/(n-BuCp)_2ZrCl_2$ due to much lower Zr content.