• Bulletin of the Korean Chemical Society
• /
• 제32권3호
• /
• pp.934-938
• /
• 2011

The curvature dependence of the physisorptions of $H_2$ on graphene surface and their barrier to the chemisorptions has been studied. The graphene with steeper curvature can adsorb $H_2$ stronger due to the more $sp^3$ character of the carbon. However, for the negative curvature, the binding strength of the physisorption and the barrier to the chemisorptions are determined by steric repulsion as well as the $sp^3$ character.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.80-83
• /
• 2007

In order to characterize the catalytically active sites on carbon black, acetylene chemisorption had been examined recently at 773 and 873 K by using a pulse technique. As the inject ion was repeated at 773 K, the adsorbed amount gradually decreased and eventually the adsorption did not occur any more. At 873 K a constant amount of $C_2H_2$ was consumed repeatedly after several injections. Good linear relationships were obtained between the methane decomposition rate at 1123 or 1173 K and the cumulative acetylene adsorption at 773 K or the constant acetylene consumption at 873 K. Reasonable models for the associative acetylene chemisorption at 773 K and the constant acetylene consumption at 873 K on the armchair face at the edges of graphene layers were proposed. The constant consumpt ion may be explained by the "$C_2H_2$-addition-hydrogen- abstract ion (CAHA)" mechanism.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2002년도 추계학술대회 발표 논문집
• /
• pp.123-126
• /
• 2002

For the mold die sticking mechanism, the major explanation is that EMC filler of silica wears die surface roughened, which results in increase of adhesion strength. As big differences in experimental results from semiconductor manufacturers are dependent on EMC models, however, chemisorptions or acid-base interaction is apt to be also functioning as major mechanisms. In this investigation, the plasma source ion implantation (PSII) using $O_2$, $N_2$, and $CF_4$ modifies sample surface to form a new dense layer and improve surface hardness, and change metal surface condition from hydrophilic to hydrophobic and vice versa. Through surface energy quantification by measuring contact angle and surface ion coupling state analysis by Auger, major governing mechanism for sticking issue was figured out to be a complex of mechanical and chemical factors.

• Membrane and Water Treatment
• /
• 제8권1호
• /
• pp.73-88
• /
• 2017

Adsorption kinetics of aqueous ferric ion ($Fe^{3+}$) onto bio-natural rice grains (BRG) have been studied in a batch system. The influence of contact time (0-180 minutes), the dosage of BRG adsorbent (10, 20, 40, and $60gL^{-1}$), and ambient temperature (27, 37, 47, and $57^{\circ}C$) for the adsorption system have been reported. The equilibrium time achieved after 20 minutes of adsorption contact time. The maximum removal of ferric ion is 99% by using $60gL^{-1}$ of BRG, $T=37^{\circ}C$, and $50mgL^{-1}$ ferric ion solution. Adsorption kinetic and diffusion models, such as pseudo-first order, pseudo-second order, and Weber-Morris intra-particle diffusion model, have been used to describe the adsorption rate and mechanism of the ferric ion onto BRG surface. The sorption data results are fitted by Lagergren pseudo-second order model ($R^2=1.0$). The kinetic parameters, rate constant, and sorption capacities have been calculated. The new information in this study suggests that BRG could adsorb ferric ion from water physiosorption during the first 5 minutes. Afterward, the electrostatic interaction between ferric ion and BGR-surface could take place as a very weak chemisorptions process. Thus, there is no significant change could be noticed in the FTIR spectra after adsorption. I recommend producing BGR as a bio-natural filtering material for removing the ferric ion from water.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.435-441
• /
• 2012

셀룰로우스를 폴리올로 전환하기 위해 수소의 존재하에서 다양한 제올라이트에 담지된 백금촉매를 비교 연구하였다. 사용한 제올라이트로는 mordenite, Y, ferrierite, 그리고 ${\beta}$이며 비교를 위하여 ${\gamma}-Al_2O_3$, $SiO_2-Al_2O_3$, 그리고 $SiO_2$에 담지한 백금촉매도 사용하였다. 촉매의 물리적 특성은 등온 질소흡착실험을 통하여 분석하였으며 표면 산점의 특성은 암모니아 승온탈착분석법으로 파악하였고 백금의 담지량은 유도결합플라즈마분광법을 사용하여 확인하였으며 백금의 분산도는 일산화탄소의 화학흡착과 투과전자현미경 사진을 통하여 결정하였다. 셀룰로우스의 전환율은 주로 반응온도나 반응시간에 영향을 받는 것으로 나타났는데, 이는 고온의 물에서 발생하는 가역적인 수소이온 때문이다. 사용한 촉매중에서 폴리올의 수득률은 Pt/H-modenite(20)을 사용하였을 때에 가장 높게 나타났으며, Pt/Na-zeolite의 경우 Pt/H-zeolite에 비하여 활성이 낮은 것을 확인할 수 있었다. 폴리올의 수득률은 표면산점의 농도와 관련이 있음을 확인할 수 있었으며, 외부표면적 또한 폴리올의 수득에 영향을 주는 것을 확인할 수 있었다.