• Journal of Photoscience
• /
• 제1권2호
• /
• pp.83-88
• /
• 1994

The synergic effect of iron plus blue light on the peroxidation of membrane lipid was investigated, using liposomes made of phospholipid. While strong irradiation did not affect Fe$^{+2}$-promoted lipid peroxidation that turned out to be O$_2$-dependent, ferric iron in bright light exerted a pronounced effect on the initiation of lipid peroxidation: this combined action of light and Fe$^{+3}$ on liposomal membranes was apparently independent of O$_2$. When liposomal samples containing Fe$^{+3}$ were subjected to irradiation, some portions of Fe$^{+3}$ were converted into Fe$^{+2}$. The extent of the Fe$^{+3}$-Fe$^{+2}$ conversion increased with increasing time of irradiation, which resembled the dependence of Fe$^{+3}$-promoted lipid peroxidation on irradiation. Further, it was observed that the effect of irradiation in liposomal samples containing Fe$^{+2}$ was strikingly mimicked by that of Fe$^{+2}$ addition to the same samples. The obligatory requirement of a suitable Fe$^{+3}$/Fe$^{+2}$ ratio for the genesis of iron-dependent lipid peroxidation, a controversial proposition, was also confirmed by the observation that lipid peroxidation was substantially enhanced by the addition of a mixture of Fe$^{+3}$ and Fe$^{+2}$, as compared to the addition of Fe$^{+3}$ or Fe$^{+2}$ alone. The results obtained in this study not only suggest that light acts as an effector for initiating lipid peroxidation, when Fe$^{+3}$ is present in membrane systems, but also imply that any chemical or physical factor that influences the redox states of iron in membranes can play a role in lipid peroxidation reactions.

• 한국진공학회지
• /
• 제7권1호
• /
• pp.11-16
• /
• 1998

본 연구에서는 GaAs의 selenium보호막형성 효과를 관찰하기 위하여 $Na_2$Se/NH$_4$OH 용액을 제조하고 X-선 광전자 분광기(X-ray photoelectron spectroscopy)와 photoluminescence(PL)를 이용하여 표면처리된 GaAs의 처리직후 및 대기중 노출에 따른 화학적 결합특성 및 광학적 특성을 관찰하였다. 용액처리 직후, 표면에는 As-Se결합이 형성 되었으며 Se는 한가지 산화상태인 -2가로 존재함이 관찰되었다. 또한 세정처리후의 표면보 다 Se용액처리 이후에 PL의 피이크 세기가 크게 증가됨으로부터 Se 용액처리가 GaAs의 표면상태밀도를 효과적으로 감소시킬 수 있음을 확인할 수 있었다. 그러나 처리 직후 공기 중 노출없이 관찰한 GaAs표면에서 산화막이 국부적으로 관찰되었으며 이렇게 처리과정중 생성된 산화막은 대기중 노출에 따라 산화막 성장을 유도하고 표면처리 효과를 저하시키는 주요인으로 작용함을 알 수 있었다. 이는 Se용액처리된 GaAs표면의 PL강도가 대기중 노출 에 따라 감소하며 세정처리후 GaAs표면의 PL강도와 유사한 값을 나타냄으로 부터도 확인 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.211-211
• /
• 2012

The electrical loss of the photo-generated carriers is dominated by the recombination at the metal- semiconductor interface. In order to enhance the performance of the solar cells, many studies have been performed on the surface treatment with passivation layer like SiN, SiO2, Al2O3, and a-Si:H. In this work, Al2O3 thin films were investigated to reduce recombination at surface. The Al2O3 thin films have two advantages, such as good passivation properties and back surface field (BSF) effect at rear surface. It is usually deposited by atomic layer deposition (ALD) technique. However, ALD process is a very expensive process and it has rather low deposition rate. In this study, the ICP-assisted reactive magnetron sputtering method was used to deposit Al2O3 thin films. For optimization of the properties of the Al2O3 thin film, various fabrication conditions were controlled, such as ICP RF power, substrate bias voltage and deposition temperature, and argon to oxygen ratio. Chemical states and atomic concentration ratio were analyzed by x-ray photoelectron spectroscopy (XPS). In order to investigate the electrical properties, Al/(Al2O3 or SiO2,/Al2O3)/Si (MIS) devices were fabricated and characterized using the C-V measurement technique (HP 4284A). The detailed characteristics of the Al2O3 passivation thin films manufactured by ICP-assisted reactive magnetron sputtering technique will be shown and discussed.

• 한국재료학회지
• /
• 제1권4호
• /
• pp.214-220
• /
• 1991

실리콘 산화막을 $CHF_{3/}C_2F_6$ 혼합가스를 사용하여 반응성이온 건식식각을 행할 때 실리콘 표면에 형성되는 잔류막과 손상층을 X-선 광전자 분광기(XPS)와 이차이온 질량 분석기(SIMS)를 사용, 연구하였다. 실리콘, 탄소, 산소 및 불소의 angle-resolved XPS분석기술을 이용한 비파괴적 화학결합상태의 깊이분포 분석을 통하여 잔류막의 표면부에 O-F 결합이 존재하며 잔류막은 주로 탄소와 불소의 결합체인 C-F 플리머로 구성되어져 있고 Si-O, Si-C 및 Si-F 결합 등이 존재함을 알았다. 손상층은 실리콘 표면에서 약 60nm 깊이까지 탄소와 불소의 침투에 의해 형성되어져 있음을 알았다.

• 환경영향평가
• /
• 제22권3호
• /
• pp.203-217
• /
• 2013

This study looked at how to establish effluent limitation standards for formaldehyde, a toxic chemical widely used in industries. To this end, we reviewed Water Quality Based Effluent Limitation (WQBEL), Technology Based Effluent Limitation (TBEL), and water quality criteria for protection of human health and aquatic organism. Based on the results, we estimated formaldehyde effluent limitation standards appropriate to control water quality of industrial wastewater in Korea. However, this study has limits due to the lack of some data necessary in estimating formaldehyde effluent limitation. For example, although water quality criteria based on non-carcinogenic properties of formaldehyde were calculated, those based on carcinogenic properties were not be able to estimate because of the absence of applicable cancer potency factor q1. Without applicable factor, we calculated water quality standards for formaldehyde based on water quality criteria of advanced countries including the United States, while with no water quality standard we referred to applicable drinking water quality standards of other countries. For eco-toxicity based on water quality criteria, proper figures could not be calculated since there have been few reliable data.

• 공업화학
• /
• 제28권1호
• /
• pp.35-41
• /
• 2017

외부에 노출된 재료는 자외선, 열, 온도, 습도 등의 다양한 환경 인자에 의해 성능저하가 일어나게 되며, 열화속도 및 사용수명에 대한 예측은 매우 중요한 문제이다. 본 연구에서는 가장 많이 사용되고 있는 색상 중 흰색, 초록색 재귀반사시트를 가지고 미국 아리조나, 인도 첸나이, 프랑스 세너리, 한국 서산 등 4개 지역에서 옥외폭로시험 및 제논아크촉진시험을 통하여 재귀반사시트 반사성능의 변화율을 측정하였다. 서산지역 및 제논아크 촉진시험을 통하여 얻어진 반사성능 값을 통해 회귀분석을 이용하여 가속계수를 구하였다. 또한, solar uv 프로그램을 이용하여 다양한 기후지역별 가속계수를 구할 수 있었으며, 그 결과 서산지역을 기준으로 프랑스 세너리 1.04배, 미국 아리조나 1.82배, 인도 첸나이 1.92배의 가속계수를 확인할 수 있었다.

• 플랜트 저널
• /
• 제9권1호
• /
• pp.50-57
• /
• 2013

본 연구에서는 개발도상국 민자발전사업의 개발단계에서 발생할 수 있는 리스크를 사업소재국, 사업주 및 시장으로 분류하여 해당 항목별 주요 리스크를 조사하고, 근래 한전 및 발전회사가 수행한 대표적인 3개 사업에 적용하여 구체적인 경감방안을 도출하고자 하였다. 개발도상국에서 민자발전사업 추진 시 전력구매처로서 신용이 부족하여 수출신용기관과 국제개발금융기구의 사업 참여가 어려운 경우, 국가신용이 양호한 주변국으로 전력판매처를 다변화하여 시장 리스크를 경감시키는 동시에 사업소재국 리스크를 경감시켜야 하며 20~30년에 걸쳐 장기간 운영해야 하는 화력발전사업의 경우 운영기간이 경과할수록 열효율도 저하되는 것을 감안하여, 설비운영 경과에 따른 성능저하 영향을 충분히 반영하여 기대수익을 보존하고 우리 기업의 손실을 최소화해야 한다.

• 한국재료학회지
• /
• 제15권8호
• /
• pp.536-542
• /
• 2005

Recently European Council(EU) published the RoHS(restriction of the use of certain hazardous substances in electrical and electronic equipment) which is prohibit the use of Pb, Hg, Cd, $Cr^{+6}$, PBB or PBDE in the electrical and electronic equipments. So EU member States shall ensure that, from 1 July 2006, new electrical and electronic equipment put on the market does not contain 6 hazardous substances. The one of the most important in electronics manufacturing process is soldering. Soldering process use the chemical substances which are applied in fluxing and cleaning processes and it can generate the malfunction of electronics caused by corrosion in the fields conditions. Therefore this study researched on the polarization and Tafel properties of Sn40Pb and Sn3.0Ag0.5Cu(SAC) solder based on the electrochemical theory. We prepared SnPb specimens which was aged in $150^{\circ}C,\;180^{\circ}C$ for 15 minutes ana Sn3.0Ag0.5Cu specimens that was aged in $180^{\circ}C,\;220^{\circ}C$ for 10 minutes. Experimental polarization curves were measured in distilled ionized water and $3.5 wt\%$, 1 mole NaCl electrolyte of $40^{\circ}C$, pH 7.5. Ag/AgCl and graphite were utilized by reference and counter electrode, respectively. To observe the electrochemical reaction, polarization test was conducted from -250 mV to +250 mV. From the polarization curves that were composed of anodic and cathodic curves, we obtained Tafel slop, reversible electrode potential(Ecorr) and exchange current density(Icorr). In these results, corrosion rate for two specimen were compared Sn3.0Ag0.5Cu with SnPb solders

• 한국재료학회지
• /
• 제23권1호
• /
• pp.31-34
• /
• 2013

Trivalent cerium-ion-doped $Y_3(Al,\;Ga)_5O_{12}$ nanoparticle phosphor nanoparticles were synthesized using the reverse micelle process. The Ce doped $Y_3(Al,\;Ga)_5O_{12}$ particles were obtained from nitrate solutions dispersed in the nanosized aqueous domains of a micro emulsion consisting of cyclohexane as the oil phase and poly(oxyethylene) nonylphenyl ether (Igepal CO-520) as the non-ionic surfactant. The crystallinity, morphology, and thermal properties of the synthesized $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ powders were characterized by thermogravimetry-differential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), and transmission electron microscopy. The crystallinity, morphology, and chemical states of the ions were characterized; the photo-physical properties were studied by taking absorption, excitation, and emission spectra for various concentrations of cerium. The photo physical properties of the synthesized $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ powders were studied by taking the excitation and emission spectra for various concentrations of cerium. The average particle size of the synthesized YAG powders was below $1{\mu}m$. Excitation spectra of the $Y_3Al_5O_{12}$ and $Y_3Al_{3.97}Ga_{1.03}O_{12}$ samples were 485 nm and 475 nm, respectively. The emission spectra of the $Y_3Al_5O_{12}$ and $Y_3Al_{3.97}Ga_{1.03}O_{12}$ were around 560 nm and 545 nm, respectively. $Y_3(Al,\;Ga)_5O_{12}:Ce^{3+}$ is a red-emitting phosphor; it has a high efficiency for operation under near UV excitation, and may be a promising candidate for photonic applications.

• 대한기계학회논문집B
• /
• 제29권3호
• /
• pp.390-401
• /
• 2005

In this study, extinction limit extension of unsteady $(CH_{4}+N_{2})$/air diffusion flames was investigated experimentally. A spatially locked flame in an opposing jet burner was perturbed by linear velocity variation, and time-dependent flame luminosity, transient maximum flame temperature and OH radical were measured over time with the high speed camera, Rayleigh scattering method and OH laser-induced fluorescence, respectively. Unsteady flames survive at strain rates that are much higher than the extinction limit of steady flames, and unsteady extinction limits extend as the slope of the strain rate increases or the initial strain rate decreases. We verified the validity of the equivalent strain rate concept by comparing the course of unsteady extinction process and steady extinction process, and it was found that the equivalent strain rate concept represents well the unsteady effect of a convective-diffusive zone. To investigate the reason of the unsteady extinction limit extension, we subtracted the time lag of the convective-diffusive zone by using the equivalent strain concept. Then the modified unsteady extinction limits become smaller than the original unsteady extinction limits, however, the modified unsteady extinction limits are still larger than the steady extinction limits. These results suggest that there exist the unsteady behavior of a diffusive-reactive zone near the extinction limit due to the chemical non-equilibrium states associated with unsteady flames.