• Environmental Analysis Health and Toxicology
• /
• 제20권4호통권51호
• /
• pp.311-325
• /
• 2005

A chemical ranking and scoring system, CRS - Korea, has recently been developed and proposed to use to prioritize on a screening level the toxic chemicals for monitoring and risk assessment. As CRS-Korea requires rigorous assessments prior to its wide application, an assessment was conducted in this study by examining the contribution of individual parameter score to the final chemical score or ranking. The sensitivity of the system to the default values for various parameters of missing data was also tested. The chemical ranking/score was round to depend primarily on the score of a single parameter, i. e., the chemical release, while toxicity scores show little correlation with the priority Further analysis indicated that the dominating effect of the chemical release results from i) its multiplicative relationship with the other two exposure parameters (biodegradation and persistent) and ii) the fact that a maximum score of 10 was assigned to the chemical release parameter while 5 was assigned for all others. AE the fraction of the data that are missing exceeded $70\%$ for various toxicity parameters at compared to less than $10\%$ for exposure parameters, the sensitivity of the ranking to the default value was not significant (rank correlation coefficient = 0.98) for toxicity parameters. Bated on this assessment, an improved CRS system (CRS - Korea II) was proposed in which the impact of the chemical release was properly adjusted by changing the multiplicative relationship to additive one and the maximum score to 5. Chemical priority was derived for each of 16 provinces by using CRS-Korea II. The chemical priority was found to significantly vary among the provinces. It was concluded that not only the national chemical priority but the local chemical priority should be taken into account in setting the nationwide chemical monitoring and risk assessment strategy.

• 한국환경보건학회지
• /
• 제47권2호
• /
• pp.144-154
• /
• 2021

Objectives: This study was intended to identify hazard contribution by region, media, and chemical by calculating a hazard-based index using pollutant release and transfer register (PRTR) data. Methods: PRTR data for the period 2011 to 2016 was analyzed to examine the regional trends in toxic releases in terms of quantity and to create a corresponding hazard-based index. For the hazard-based index, the Risk-Screening Environmental Indicators (RSEI) Model was used. Results: The results of the trend analysis show that total releases decreased slightly, but health hazard levels increased consistently. According to the outcome of regional contribution analysis of the hazard-based index, Chungcheongnam-do, Jeollabuk-do and Gyeonggi-do Provinces showed a high ratio in the index for air and water release pollutants, while Gyeongsangbuk-do and Gyeongsangnam-do Provinces showed a high ratio in the index of soil release and waste transfer pollutants. Also, as a result of the analysis of the top ranked substances in the hazard-based index, it was found that chromium, cobalt and its compounds, and ethylene oxide contributed greatly to air release substances, while chromium, benzene, and lead and its compounds contributed greatly to water release substances. Conclusion: These results showed considerable disparities between total release and health hazard levels, especially in the analysis of contribution by regions and by chemical substance. Therefore, the hazard-based index should be used both to support a more comprehensive and robust approach to screening of chemicals for environmental health policy and for management.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.267-276
• /
• 2022

Modelling the energy release performance of energetic material combustion in closed systems is of fundamental importance for aerospace and defense application. In particular, to compensate for the disadvantage of the combustion of single energetic material and maximize the benefits, a method of combusting the mixed energetic materials is used. However, since complicated heat transfer occurs when the energetic material is combusted, it is difficult to theoretically predict the combustion performance. Here, we suggest a theoretical model to estimate the energy release performance of mixed energetic material based on the model for the combustion performance of single energetic material. To confirm the effect of parameters on the model, and to gain insights into the combustion characteristics of the energetic material, we studied parameter analysis on the reaction temperature and the characteristic time scales of energy generation and loss. To validate the model, model predictions for mixed energetic materials are compared to experimental results depending on the amount and type of energetic material. The comparison showed little difference in maximum pressure and the reliability of the model was validated. Finally, we hope that the suggested model can predict the energy release performance of single or mixed energetic material for various types of materials, as well as the energetic materials used for validation.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.60-68
• /
• 2004

Consequence analysis of flammable materials that affect to a risk of facilities was studied at the risk based inspection using API-581. We found that consequence areas (damage area of equipment and fatality area) by release accident of flammable materials showed high value for the case of liquid phase and auto-ignition likely, and that consequence areas of flammable gases decreased as temperature increased and the pipe diameter and pressure decreased at continuous release.

• Bulletin of the Korean Chemical Society
• /
• 제21권7호
• /
• pp.727-733
• /
• 2000

Analytical potential energy surfaces have been constructed for the four-center elimination of HCI from 1,1-dichloroethylene.The potential functions are Morse-type functions which are modified by appropriate switching and attenuating functions with adjustable parameters. The parameters have been found by fitting the calculated vibrational frequencies, reaction endothermicity, equlibrium geometries of the reactant and products to those of experiments and ab initio calculations. The translational energy release obtained from classical trajectory calculations on this surface is in good agreement with the experiment.

• 대한화학회지
• /
• 제58권6호
• /
• pp.575-579
• /
• 2014

종양 조직으로 약물을 효과적으로 전달하기 위하여 리포솜의 개발이 활발이 연구되고 있다. 그러나 리포솜이 종양조직에 효과적으로 축적됨에도 불구하고, 낮은 약물 방출 때문에 리포솜의 치료 효과가 제한적이다. 따라서 우리는 외부 자극에 의하여 약물방출을 최대화 시킬 수 있는 온도민감성 리포솜을 개발하였다. 모델약물인 독소루비신은 pH 전위차 방법에 의하여 리포솜 내부에 봉입하였다. 리포솜의 입자 크기는 $142.0{\pm}6.24nm$ 이었고, 표면전하는 $-10.55{\pm}1.12mV$ 이었다. 온도민감성 리포솜으로부터 약물의 방출은 형광광도계로 측정하였으며 $42^{\circ}C$ 이상에서 5분 이내에 80% 이상의 방출률을 나타냈다. 초음파에 의해 온도민감성 리포솜으로부터 방출된 독소루비신의 세포독성은 초음파를 조사하지 않은 온도민감성 리포솜보다 월등히 우세하였다. 이번 연구에서 우리는 초음파에 의하여 온도민감성 리포솜으로부터 온도에 민감한 약물방출을 증명하였고, 이것은 외부 자극에 의한 종양조직의 약물 농도를 증가시킬 수 있는 암치료에 효과적일 것이다.

• 한국가스학회지
• /
• 제18권4호
• /
• pp.76-85
• /
• 2014

본 연구는 독성가스 사고의 주요 원인의 하나인 부식에 대해 고압 독성가스시설을 대상으로 필요한 안전기술을 정립하기 위하여 미국석유학회에서 개발한 API-581 절차를 채택하여 사고결과 분석방법에 대한 적용성을 검토하고, 이를 바탕으로 사고결과 분석방법을 제시하였다. 고압 독성가스시설에서 API-581의 8단계 사고결과 분석절차에 따라 단계별 적용성을 검토한 결과, 고압 독성가스시설에 적용할 사고결과 분석방법은 총 6단계로 단순화 할 수 있었다. 즉, Step 1(대표물질 결정), Step 5(누출유형 결정), Step 6(유체상 결정)과 Step 8(사고 피해영역 산출)은 적용하지 않고, Step 3(누출량 산출)은 inventory group 개념만 적용하며, Step 4(누출속도 산출)는 기체 누출속도만을 적용하고, Step 2(누출공 크기 선정)와 Step 7(완화시스템 등급 결정)은 전부 적용한다. 이때, Step 5와 Step 8은 일반적으로 적용이 가능한 CCPS 방법을 대안적인 방법으로 채택한다.

• 대한한방내과학회지
• /
• 제21권1호
• /
• pp.156-161
• /
• 2000

The unripe fruit of Poncirus trifoliata Raf has been used for the treatment of allergic disease. Recently it was reported that the fruit inhibits passive cutaneous anaphylaxis and histamine release at mast cell. Type I immediate hypersensitivity of anaphylactic type is caused by released mediate chemical at mast cell. Histamine is also known as one of potent mediate chemical. Also release of mediate chemical is affected by specific stimulation of IgE combined with mast cell. Activation of mast cell is known to be stimulated by compound 48/80 and inhibited by increase of cAMP. In this experiment, the effect of water extract of Poncirus trifoliata Raf fruit (PT) on a histamine release, cAMP concentration and IgE production was measured. Compound 48/80 was administrated to the mouse peritoneal cell which was pretreated with PT. PT dosedependently inhibited histamine release at peritoneal mast cell and the serum level of histamine induced by compound 48/80. PT also instantly increased cAMP level of peritoneal mast cell right after it was added and the level gradually decreased. Production of IgE induced by antigens at mouse peritoneal cell was inhibited by PT. The IgE synthesis is induced by IL-4 and it is known that lipopolysaccharide(LPS) plus IL-4 cause an increase in IgE secretion by murine B cells. The effects of PT inhibited the production of IgE activated by LPS plus IL-4 at human U266B1 cells. These results indicate that PT has antiallergic activity by Inhibition of IgE production from B cells and histamine release by increase of cAMP.

• Macromolecular Research
• /
• 제16권4호
• /
• pp.379-383
• /
• 2008

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.422-426
• /
• 2008

Hemodialysis graft coated with paclitaxel prevents stenosis; however, large initial burst release of paclitaxel causes many negative effects such as drug toxicity and inefficient drug loss. Therefore we developed and tested a novel coating method, double dipping, to provide controlled and sustained release of paclitaxel locally. Expanded polytetrafluoroethylene (ePTFE) grafts were dipped twice into a solution of several different paclitaxel concentrations. In vitro release tests of the double dipping method showed that early burst release could be somewhat retarded and followed by sustained release for a long time. We observed the effect of paclitaxel coating by double dipping in porcine model of arterio-venous (AV) grafts between the common carotid artery and the external jugular vein. 12 weeks after constructing AV grafts, cross sections of the graft venous anastomosis were obtained and analyzed. Paclitaxel coated ePTFE grafts by double dipping were observed to prevent neointimal hyperplasia and therefore reduced stenosis of the arteriovenous hemodialysis grafts, especially at the graft venous anastomosis sites. Our results demonstrate that second dipping of ePTFE graft, which was already coated once with paclitaxel, washes off the drug on a surface of the graft and affects the ratio of paclitaxel on the surface to that of the inner space, possibly by diffusion: thus the early burst of drug can be somewhat reduced.