Acknowledgement
This study was financially supported by the defense acquisition program administration and Agency for Defense Development (ADD) contract. This research was also supported by the Korea Institute of Energy Technology Evaluation and Planning (KETEP) and the Ministry of Trade, Industry & Energy (MOTIE) of the Republic of Korea (No. 20194010201840).
References
- Francois, L., Dupays, J., Davidenko, D. and M. Massot, "Travelling Wave Mathematical Analysis and Efficient Numerical Resolution for a One-dimensional Model of Solid Propellant Combustion," Combust. Theor. Model., 24, 775-809(2020). https://doi.org/10.1080/13647830.2020.1752943
- Ulas, A., Risha, G. A. and Kuo, K. K., "An Investigation of the Performance of a Boron/Potassium-Nitrate Based Pyrotechnic Igniter," Propellants Explos. Pyrotech., 31(4), 311-317(2006) https://doi.org/10.1002/prep.200600047
- Han, D.-H., Sung, H.-G. and Ryu, B.-T., "Numerical Simulation for the Combustion of a Zirconium/Potassium Perchlorate Explosive inside a Closed Vessel," Propellants Explos. Pyrotech., 42(10), 1168-1178(2017). https://doi.org/10.1002/prep.201700068
- Kalpakli, B., Acar, E. B. and Ulas, A., "Improved Combustion Model of Boron Particles for Ducted Rocket Combustion Chambers," Combust. Flame, 179, 267-279(2017). https://doi.org/10.1016/j.combustflame.2017.02.015
- Jackson, T. L., Massa, L. and Brewster, M. Q., "Unsteady Combustion Modelling of Energetic Solids, Revisited," Combust. Theor. Model., 8(3), 513-532(2004). https://doi.org/10.1088/1364-7830/8/3/005
- Hernandez, A. M. and Stewart, D. S., "Computational Modelling of Multi-material Energetic Materials and Systems," Combust. Theor. Model., 24(3), 407-441(2020). https://doi.org/10.1080/13647830.2019.1689299
- Gonthier, K. A. and Powers, J. M., "Formulation, Predictions, and Sensitivity Analysis of a Pyrotechnically Actuated Pin Puller Model," J. Propul. Power, 10(4), 501-507(1994). https://doi.org/10.2514/3.23800
- Jang, S., Lee, H. and Oh, J., "Performance Modeling of a Pyrotechnically Actuated Pin Puller," Int'l J. of Aeronautical & Space Sci., 15(1), 102-111(2014). https://doi.org/10.5139/IJASS.2014.15.1.102
- Paul, B. H. and Gonthier, K. A., "Analysis of Gas-Dynamic Effects in Explosively Actuated Valves," J. Propul. Power, 26(3), 479-496(2012). https://doi.org/10.2514/1.43190
- Yang, L. C., "Effects of Fuel Particle Size and Impurity on Solid-to-solid Pyrotechnic Reaction Rate," 47th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibition, San Diego, California (2011).
- Yang, L. C., "Reaction Rate Analysis for Selected Solid-to-solid Reaction Pyrotechnic Compositions," 48th AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibition, Atlanta, Georgia (2012).
- Kong, T. Y., Won, Y., Ryu, B., Ahn, G. and Im, D. J., "Mathematical Modeling of ZrKClO4 Nano Particle Energy Release," J. Nanosci. Nanotechnol., 17(11), 8372-8377(2017). https://doi.org/10.1166/jnn.2017.15146
- Johnston, I. A., "The Noble-Abel equation of state: Thermodynamic Derivations for Ballistics Modelling," DSTO-TN-0670, Defence Science and Technology Organisation, Edinburgh, Australia (2005).
- Nagasaka, Y. and Nagashima, A., "The Thermal Conductivity of Molten NaNO3 and KNO3", Int. J. Thermophys., 12(5), 769-781 (1991). https://doi.org/10.1007/BF00502404
- Varghese, P. L., "Investigation of Heat Transfer in Zirconium Potassium Perchlorate at Low Temperature: A Study of the Failure Mechanism of the NASA Standard Initiator," NASA-CR-184774, The University of Texas at Austin Center for Energy Studies, Austin, TX, United States (1989).
- Chen, K. S., "A Simplified Model of TiH1.65/KClO4 Pyrotechnic Ignition," SAND2009-1217, Sandia National Laboratories, Albuquerque, New Mexico (2009).
- Cha, S. et al., "Combustion Modeling of Explosive for Pyrotechnic Initiator," J. Korean Soc. Propuls. Eng., 21(6), 39-48(2017). https://doi.org/10.6108/KSPE.2017.21.6.039
- Manning, T. et al., "Formulation Development and Characterization of Cellulose Acetate Nitrate Based Propellants for Improved Insensitive Munitions Properties," Def. Technol., 10(2), 92-100(2014). https://doi.org/10.1016/j.dt.2014.05.011
- National Institute of Standards and Technology website; software available at http://webbook.nist.gov/chemistry/
- Holy, J. A., "Burn Rates of TiH2/KClO4/Viton and Output Testing of NASA SKD26100098-301 Pressure Cartridges," EG&G Mound Applied Technologies, NASA-CR-188357, Miamisburg, OH (1993).
- Yano, Y., "Condensed Phase Reaction of Boron with Potassium Nitrate," Propellants Explos. Pyrotech., 14(5), 187-189(1989). https://doi.org/10.1002/prep.19890140503