• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1000-1006
• /
• 2011

A systematic study of Knoevenagel reaction and Nazarov cyclization was made on variety of less reactive carbonyl compounds such as ${\beta}$-ketoesters, 1,3-diketones and cyclic active methylene compounds using $Yb(OTf)_3$ as the catalyst. Recycling study confirms reusability of the catalyst without much loss of activity.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.79-84
• /
• 1993

The rates of absorption of carbon dioxide into aqueous solutions of 2-amino-2-methyl-1 propanol (AMP) were measured using a semibatch stirred vessel with a plane gas-liquid interface at $25^{\circ}C$. The absorption rates under the fast reaction regime were analysed using chemical absorption theory. The reaction was found to be first order with respect to both $CO_2$ and the amine.

• Bulletin of the Korean Chemical Society
• /
• v.9 no.1
• /
• pp.30-32
• /
• 1988

Symmetrical diaryl ${\alpha}-diketones$ were synthesized in moderately good yields through the palladium catalyzed reaction of aryl iodides with carbon monoxide. The reaction was tolerant of a wide variety of fuctionalities($OCH_3,\;CH_3,\;NO_2,\;OH,\;COOH$) on the aryl iodide. On the other hand, the similar reaction of aryl bromides or chlorides with carbon monoxide did not proceed.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.448-452
• /
• 1994

2-Hydroxymethyl-2,5-dihydrothiophene 1,1-dioxide (1) was prepared from thiophene-2-carboxylic acid by consecutive reactions involving the Birch reduction, esterification, reduction with lithium aluminum hydride, and oxidation with Oxone$^{\circledR}$. The esterification of alcohol 1 with various unsaturated carboxylic acids provided the precursors 8 for the intramolecular Diels-Alder reaction. The cheletropic expulsion of sulfur dioxide from the esters 8 followed by intramolecular Diels-Alder reaction furnished bicyclic ${\gamma}$-and ${\delta}$-lactones.

• Journal of the Korean Ceramic Society
• /
• v.46 no.3
• /
• pp.288-294
• /
• 2009

The platelet AlO(OH) nano colloids were prepared by hydrothermal reaction of the $\gamma-Al_2O_3$ obtained with dehydration of $\gamma$-AlO(OH) and dilute $CH_3COOH$ solution. In hydrothermal reaction process, reversible reaction was accompanied between $\gamma-Al_2O_3$ and AlO(OH), and hydrothermal reaction temperature, hydrothermal reaction time and $CH_3COOH$ concentration had an effect on the crystal structure, surface chemical property, surface area, pore characteristics and crystal morphology of the AlO(OH) nano colloid particles. In this study, it was investigated to the hydrothermal reaction condition of the AlO(OH) nano colloid for using catalyst support, heat resisting agent, adsorbents, binder, polishing agent and coating agent. The crystal structure, surface area, pore volume and pore size of the platelet AlO(OH) nano colloids were investigated by XRD, TEM, TG/DTA, FT-IR and $N_2$ BET method in liquid nitrogen temperature.

• Applied Chemistry for Engineering
• /
• v.8 no.5
• /
• pp.872-879
• /
• 1997

The nonuniform thermal conductive reaction blocks were manufactured by impregnation of metal salts on the expanded graphite to improve the heat and mass transfer ability of reaction block for the chemical heat pump using the reaction of ammonia and metal salts(halide). The nonuniform blocks were designated to increase apparent density, like 165, 222, 279, 337, $394kg/m^3$ radially The experimental results showed that the heat transfer characteristics of nonuniform blocks were better than uniform blocks. As the reaction of ammonia repeated, the volumetric expansion in the reaction block makes the mass transfer improve, and the reproducibility better.

• Journal of the Korean Applied Science and Technology
• /
• v.6 no.2
• /
• pp.29-37
• /
• 1989

Using the quarternary ammonium salts as phase transfer catalyst, the nucleophilic substitution reaction of 1-chlorooctane with sodium-cyanide was investigate kinetically with respect to the formation of octanenitrile. The product was analyzed with gas chromatograph, and quantity of octanenitrile was measured. The reaction condition was considered by the effect of the reaction temperature, of the species and the amount of catalyst, of the speed of strirring, and of the concentration of reactants. The reaction was carried out in the first order on the concentration of 1-chlorooctane and sodium cyanide, respectively. The over-all order was 2nd. The activation energies for the nucleophilic substitution reaction of 1-chlorooctane and 1-bromooctane under tetrabutylammonium hydrogen-sulfate were calculated as 2.05 and 10.08kcal/mol, respectively. The effect of various caltalysts was decreased in the order of tetrabutylammonium bromide, terabutylammonium, tetrabutylammonium hydrogensulfate, and tetrabutylammonium iodide. The reaction rate was dependent on the concentration of sodium-cyanide dissolved in the aqueous phase, and the good result was shown when the mol ratio between 1-chlorooctane and sodium cyanide was one per three.

• Korean Chemical Engineering Research
• /
• v.47 no.3
• /
• pp.380-385
• /
• 2009

The absorption rate of carbon dioxide with 2-amino-2-methyl-1-propanol(AMP) was measured in such non-aqueous solvents as methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, and propylene carbonate, and in water at 298 K and 101.3 kPa using a semi-batch stirred tank with a plane gas-liquid interface. The overall reaction rate constant, obtained under the condition of fast reaction regime, from the measured rate of absorption was used to get the elementary reaction rate constants in complicated reactions represented by reaction mechanism of carbamate formation and the order of overall reaction of $CO_2$ with amine. The correlation between the elementary reaction rate constant and the solubility parameter of the solvent was also presented.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.12
• /
• pp.4079-4083
• /
• 2012

The mechanism of the cycloaddition reaction between singlet state dichlorosilylene germylidene ($Cl_2Si=Ge:$) and acetone has been investigated with B3LYP/6-$31G^*$ and B3LYP/6-$31G^{**}$ method, from the potential energy profile, we predict that the reaction has one dominant reaction pathway. The presented rule of the reaction is that the two reactants firstly form a Si-heterocyclic four-membered ring germylene through the [2+2] cycloaddition reaction. Because of the 4p unoccupied orbital of Ge atom in the Si-heterocyclic four-membered ring germylene and the ${\pi}$ orbital of acetone forming a ${\pi}{\rightarrow}p$ donor-acceptor bond, the Si-heterocyclic four-membered ring germylene further combines with acetone to form an intermediate. Because the Ge atom in the intermediate hybridizes to an $sp^3$ hybrid orbital after the transition state, then, the intermediate isomerizes to spiro-heterocyclic ring compound involving Si and Ge (P4) via a transition state.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.3
• /
• pp.84-99
• /
• 2001

This study was carried out to acquire basic data necessary for the use of rice-straw chemical pulp. It investigated the proper bleaching conditions when rice-straw chemical pulp(alkaline sulfite-${Na_2}{S_2}{O_4}$) was bleached using the various kinds of bleaching agents by the two-stages bleaching methods. And, physical properties of pulps bleached with eight kinds of two-stages bleaching methods were tested. The results of this study were as follow; 1. The first-stage bleaching was conducted under the proper conditions with chlorine(C). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of CH stage were determined to be 0.3% concentration of calcium chlorite, $30^{\circ}C$ of reaction temperature and 20min. of reaction time. For CP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.5%, $60^{\circ}C$ and 90min., respectively. And for CY stage, the proper conditions were 0.5% concentration of sodium hydrosulfite, $40^{\circ}C$ of reaction temperature and 90min. of reaction time. 2. The first-stage bleaching was conducted under the proper conditions with chlorine dioxide(D). And then, the proper conditions related to the calcium chlorite(H), hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of DH stage were determined to be 0.5% concentration of calcium chlorite, $25^{\circ}C$ of reaction temperature and 5min. of reaction time. For DP stage, the proper conditions of concentration of hydrogen peroxide, reaction temperature and reaction time were 1.0%, $70^{\circ}C$ and 90min., respectively. And for DY stage, the proper conditions were 0.3% concentration of sodium hydrosulfite, $50^{\circ}C$ of reaction temperature and 20min. of reaction time. 3. The first-stage bleaching was conducted under the proper conditions with calcium chlorite(H). kAnd then, the proper conditions related to the hydrogen peroxide(P) and sodium hydrosulfite(Y) bleaching as the second-stage bleaching were investigated. The proper conditions of HP stage were determined to be 0.3% concentration of hydrogen peroxide, $30^{\circ}C$ of reaction temperature and 60min. of reaction time. For HY stage, the proper conditions of concentration of sodium hydrosulfite, reaction temperature and reaction time were 2.5%, $60^{\circ}C$ and 30min., respectively. 4. When the rice-straw chemical pulps were bleached with eight kinds of two-stages bleaching methods in the proper conditions mentioned above, respectively, the final brightnesses after CH, CP, CY, DH, DP, DY, HP, and HY bleachings were 62.0, 74.3, 61.4, 58.9, 66.9, 62.9, 50.4 and 60.1, respectively. And strengthes of pulps bleached with DP and DH methods were comparatively higher than those of pulps bleached with other bleaching methods.