• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.7
• /
• pp.432-440
• /
• 2015

Biochar, a by-product from pyrolysis of biomass, is a promising option to mitigate climate change by increasing soil carbon sequestration. This material is also considered to have potential to remediate a soil with heavy metal pollution by increasing the soil's adsorptive capacity. This study conducted the assessment of two biochars considering the climate change mitigation potential and heavy metal removal capacity at the same time. Two kinds of biochars (BC_Ch, TW_Ch) were prepared by pyrolyzing the biomass of burcucumber (BC_Bm) and tea waste (TW_Bm). The soils polluted with Pb were mixed with biochars or biomass and incubated for 60 d. During the incubation, $CO_2$, $CH_4$, and $N_2O$ were regularly measured and the soil before and after incubation was analyzed for chemical and biological parameters including the acetate extractable Pb. The results showed that only the BC_Ch treatment significantly reduced the amount of Pb after 60 d incubation. During the incubation, the $CO_2$ and $N_2O$ emissions from the BC_Ch and TW_Ch were decreased by 24% and 34% compared to the BC_Bm and TW_Bm, respectively. The $CH_4$ emissions were not significantly affected by biochar treatments. We calculated the GWP considering the production of amendment materials, application to the soils, removal of Pb, and soil carbon storage. The BC_Ch treatment had the most negative value because it had the higher Pb adsorption and soil carbon sequestration. Our results imply that if we apply biochar made from burcucumber, we could expect the pollution reduction and climate change mitigation at the same time.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.4 no.1
• /
• pp.18-28
• /
• 2005

Purpose: The purpose of this study is to evaluate the clinical, radiological and histopathological results after microfracture surgery for degenerative arthritis of the knee. Materials and Methods: From Oct. 1997 to Dec. 1998, 48 knees in 46 patients were treated by microfracture technique. Their mean age at the time of operation was 56 years(range, 40-75 years) and mean period of follow-up study was one year(range, 7-20 months). For 24 knees in 22 patients, 'second-look' arthroscopies and biopsies were performed at 6 months following microfracture. At the last follow up clinical results were evaluated with Baumgaertner's scale. The specimens of 24 cases were stained with H-E, Safranin-O, and Masson's trichrome. Eighteen of 24 cases were stained immunohistochemically and the Western blotting test was performed on 12 cases for type II collagen. We analyzed the relationship of the Western blotting for type II collagen with clinical score, preoperative varus deformity, joint space widening in radiological result, extent of repaired articular cartilage in '2nd-look' arthroscopic findings, patient's age and weight. Results: Clinical results were excellent in 90% and good in 10%. Among the 24 knees, more than 80% of areas of chondral defect were covered with regenerated cartilage in 21 knees Histologically, the repaired tissue appears to be a hybrid of hyaline cartilage and fibrocartilage. Repaired cartilage contains variable amounts of type II collagen with immunohistochemical staining. The results of the Western blotting test were similar. The amounts of type II collagen formation had positive correlation with the extent of repaired cartilage and preoperative varus deformity. Conclusion: 'Second-look' showed that the chondral defect areas were covered with newly grown grayish white tissue. Articular cartilage repair was confirmed with histological and immunohisto-chemical study qualitatively, and the amount of type II collagen was calculated with the Western blotting test quantitatively. The exact nature and fate of repaired cartilagenous tissues need further long term follow-up study. The results of this study provide the rationale to select osteoarthritic patients indicated for microfracture surgery.

• Journal of Nutrition and Health
• /
• v.14 no.2
• /
• pp.97-104
• /
• 1981

In order to study the changes of components and enzyme activities during Chungkookjang-Koji preparation, the Kojies were prepared with Bacillus Natto, Bacillus subtilis and traditional method. The temperature of Koji materials during Koji preparation was very different according to the experimental group. The content of ethyl alcohol, reducing sugar, amino nitrogen and water soluble nitrogen were changed by the Koji preparing stage and experimental group. Amylase and protease activities showed on irregular change on standing and their activities were not remarkably different among the groups and appeared weakly.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.5
• /
• pp.264-271
• /
• 2002

Nitrogen releasing characteristics of polymer-coated urea(PCU) that made acrylic synthetic resins were studied in incubated soil, water and paddy soil. Also, their correlations and degradation patterns of coating material were tested. Releasing rate of nitrogen from PCU decreased with increasing coating rate. N001(coating rate 8.5%) and N003(coasting rater 6.3%) were low releasing amount at the early stage, whereas N005(coating rate 4.8%) was released over 80% within 20 days. Relationship of the releasing rate between incubated soil($25^{\circ}C$) and paddy soil could be described as follows : $Y=-0.0011X^2+2.2931X-50.264(R^2=0.9884)$ for N001, $Y=-0.0016X^2+1.1587X+5.5064(R^2=0.9805)$ for N003 and $Y=-0.03X^2+6.499X-243.22(R^2=0.9422)$ for N005, respectively (Y: release rate at field condition, X: experiment period). Relationship of the releasing rate between incubated water($30^{\circ}C$) and paddy soil can be described as follows : $Y=0.0011X^2+2.2601X-25.329(R^2=0.9884)$ for N001, $Y=-0.0306X^2+4.4994X-76.307(R^2=0.955)$ for N003 and $Y=-0.0164X^2+3.7764X-108.22(R^2=0.9422)$ for N005. After 150 days, coating materials of N001, N003, and N005 in incubated soil were degraded approximately 23%, 22% and 15%, respectively. Also The scanning electron microscope examination of coating material revealed that particle surface became gradually shattered with the time after the soil treatment.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.3
• /
• pp.255-263
• /
• 1996

This study was conducted to evaluate the application effects of three different granular fused magnesium phosphate products on soybean in a volcanic ash upland soil(Namweon series) of Cheju island. They were two domestic products(Kyunggi Chemical Industrial Co., LTD, Pungnong Biryo Industrial Co., LTD) and an imported Chinese product that were manufactured from different added materials. A powder fused magnesium phosphate. a single superphosphate(water soluble phosphatic fertilizer) and a fused superphosphate(mixed water soluble phosphate and 2% citric acid soluble phosphate) were presented as check fertilizers. Yield of soybean was the highest in the Pungnong product of granular fused magnesium phosphate. the next was the Chinese product imported and the Kyunggi product was the lowest but there was no statistical significance among the three granular products of fused magnesium phosphate. There was no clear tendency between yield and yield components of soybean plant however, the effects on the number of mainstem nodes, number of branches nodes and number of pods per plant were observed in the increased yield treaments. Phosphate concentration in stems and pods of soybean plant at harvesting stage was higher than those in stems of soybean plant during growing period. Uptake amounts and recovery rates of phosphate in stems and pods of soybean plant at harvesting stage were similar with the yield increasing tendency on soybean. In the changes of soil pH at different periods, the application of phosphatic fertilizers was increased soil pH. Soil pH in Chinese product was higher than domestic products, but it was similar to single superphosphate. The available silicate concentrations of soil were higher in the plot of Pungnong product than Chinese product.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.3
• /
• pp.95-111
• /
• 2004

This research sought to determine the status of the installation and operation of composting facilities of domestic public resource-making facilities and come up with corresponding improvement measures. The composting facilities were the most extensively installed of related facilities with over a 0.5 ton treated volume per day. The monthly and yearly carry-in volume of food waste were found to stand at 1,101.7 tons per day and 930.9 tons per day, thus falling short of the average planned volume of 1,270.9 tons. Many composting facilities, which were installed in areas for which factory registration were not approved, did not get approvals. Composting facilities underwent operation stoppage mainly due to faulty fermentation and crushing equipment. Mainly metals contained in food waste caused faults to the crushing equipment, thus requiring a facility designing against faults and corrosion. The initial water content was found to stand at 50-60%, thus complying with the requirement. However, since the composting food waste had an appropriate mixture of sawdust, food waste, and returned compost, it should meet the initial conditions. For fermentation facilities, the duration time for fermentation was 15 days, and post-fermentation tanks required 21 days of duration time, thus establishing the minimum criteria. However, some facilities did not meet the requirements, taking more time in decomposition, thus suggesting a need to determine the duration time according to facilities. In composting food waste, microorganism-based thermal oxidizer-operated fermentation tanks should be used to ensure an economic operation. On the contrary, 14 out of 25 survey targets heated fermentation tanks in any form. These thermal facilities contain the growth of bacteria, lowering chemical reaction in composting; thus composting facilities should be basically designed to use microorganism-based thermal oxidizers in drying water. An average daily volume of food waste and supplementary materials that was injected in producing compost was 22.8 tons. This volume produced 7.3 tons of compost per day, decreasing 68%. Properties of produced compost were analyzed by its color, absence or presence of remaining decomposition heat, and smell, to assess the quality. As a result, the composting process was not properly installed nor operated in about 50% of composting facilities. Compost should be produced to be soil-friendly.

• Journal of Acupuncture Research
• /
• v.24 no.6
• /
• pp.1-14
• /
• 2007

Backgrounds : Rheumatoid Arthritis(RA) is known as the chronic inflammatory diseasethat induces persistent inflammation in the joint cavity. The destruction of cartilage occurs as the result of bones destoyed by pannus, several influential cytokines induced by the synovial capsulitis, varieties of proteinases, $O_2$ radicals, and the secondary degenerative changes of articular cartilage. The type 2 collagen-induced arthritis model is used in recent experimental research on rheumatoid arthritis. Cervus elaphus sibiricus (Nockyong) has the effect of relieving pain by nourishing the muscles, joints, and bones. It is also known to be efficacious in promoting and enhancing the immune system. The objective of this study was to investigate the effect of Cervus elaphus sibiricus herbal acupuncture to inhibit the generation of proinflammatory enzyme on type 2 collagen-induced arthritis. I investigated the inhibition of mRNA transcription of MIF(macrophage migration inhibitory factor), $TNF-{\alpha}$(Tumor necrosis $factor-{\alpha}$) and MMP-9 (matrix metalloproteinase-9) of Cervus elaphus sibiricus herbal acupuncture using an in vitro test. Also investigated was the inhibition of differentiation of Th 1 cells and activation of cytokines(MIF, $TNF-{\alpha}$, IL-6, MMP-9), which are known to cause initial RA ,and are also related to the morphology of the synovial membranes of the joint capsule, by an in vivo test, using CIA(collagen induced arthritis) model mice. Materials & methods : The laboratory animals used in this experiment were 4 week-old DBA female mice, weighing approximately 20 grams, and adjusted to the laboratory environment. The experiment was divided into the normal group(NOR)-no treated group, control group(CON)-CIA induced group, and sample group(SAM)-Cervus elaphus sibiricus herbal acupuncture treated group. RA was induced in the mice via injection of $50{\mu}{\ell}$ C II mixed CFA. The Cervus elaphus sibiricus herbal acupuncture solution was applied on $GB_{35}$(陽陵泉) for 26 days from the 3rd day of RA inducement. The concentration of the solution was determined via a MTT assay. To research the effect on the expression of MIF, $TNF-{\alpha}$ and MMP-9 mRNA, RT-PCR was performed on synovial membrane cells from the knee joint of CIA mice. C II induced RA knee joint's histo-chemical synovial membrane was observed using a specimen model via the Hematoxilin and Eosin dying technique. Results : The expression of mRNA of RA-related cytokines such as MIF, $TNF-{\alpha}$, and MMP-9 dosedependently decreased in the cell from the synovial membranes of the joint, which is treated with Cervus elaphus sibiricus herbal acupuncture solution. In mice treated with Cervus elaphus sibiricusherbal acupuncture, the damage of synovial membranes of the joint was lessened, and differentiation of Th 1 cells was suppressed. The activation of RA-related cytokines such as MIF was suppressed, and the generation of $TNF-{\alpha}$ and MMP-9 showed a statistically significant decreas. Conclusions : It is speculated that Cervus elaphus sibiricus herbal acupuncture has the therapeutic effect of palliating the damage of the tissue impaired by RA by inhibition of the initial RA progression and by regulating excessive differentiation of Th 1 cell as it suppresses the generation of RA-related cytokines during the highest stage of RA by acting on pro-inflammatory enzymes.

• Journal of the Korean Magnetics Society
• /
• v.14 no.1
• /
• pp.38-44
• /
• 2004

The iron doped colossal magnetoresistance materials with La-Ba-Mn-O perovskites structure have been synthesized by chemical reaction of sol-gel methods. Their crystallographic and magnetic properties have been studied with x-ray diffraction, VSM, RBS, Mossbauer spectroscopy, and magnetoresistance measurements. The crystal structure of the La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$ at room temperature was determined to be orthorhombic of Pnma. The lattice parameters a$\_$0/ and c$\_$0/ increased gradually, but b$\_$0/ deceased with increase of iron substitution. The magnetization and coercivity deceased, also the Curie temperature decreased from 360 K as x increased from 0.00 to 0.05. Magnetoresistence measurements were carried out, and the maximum MR ($\Delta$$\rho$/$\rho$(0)) was observed at 281 K, about 9.5 % in 10 kOe. The temperature of maximum resistance (R$\_$MAX/) decreased with increasing substitution of Fe ions and a semiconductor-metal transition temperature (T$\_$SC-M/) decreased too. This phenomena show that ferromagnetic transition temperature decreased by substituting Fe for Mn ions, it decreases double exchange interaction. This result accords with magnetic structure of neutron diffraction. Mossbauer spectra of La$\_$0.67/Ba$\_$0.33/Mn$\_$0.99/Fe$\_$0.01/ $O_3$were taken at various temperatures ranging from 15 to 350 K. With lowering temperature of the sample, two magnetic phases were increased and finally it showed the two sharp sextets of spectra at 15 K. The isomer shift at all temperature range is about 0.3 mm/s relative to Fe metal, which means that both Fe ions are Fe$\^$3+/ states.Fe$\^$3+/ states.

• Korean Journal of Agricultural Science
• /
• v.32 no.2
• /
• pp.205-214
• /
• 2005

The purpose of this study was to investigate the effect of ground corn as an additive to ginseng residue silages. The silages were made with corn (CS), red ginseng (GS), red ginseng residue +0.5% ground corn (GS0.5), w/w bases, red ginseng residue+1.0% ground corn (GS1.0) and red ginseng residue+silage inoculant, lactic acid bacteria (GSL). The raw materials were cut only for corn forage in 2cm length. The ginseng residue without cutting were mixed without or with additives, ground corn and inoculant, and ensiled each into two 2,000ml glass bottles. The bottles with silages were stored at a dark place at room temperature and formented for 60 days. The crude protein contents were higher for all red ginseng silages as 17.7, 18.8, 18.3 and 17.8% for GS, GS0.5, GS1.0 and GSL than that of corn silage as 8.8% (p<0.05). The calcium content were higher in GS, GS0.5, GS1.0 and GSL as 0.99, 1.13, 0.99 and 1.03% than that in CS as 0.31% (p<0.05). The pH of silages fermented for 60 days was similar each other; CS, GS, GS0.5, GS1.0 and GSL as 3.8, 3.7, 3.3, 3.5 and 3.7, respectively. However the pH of GS0.5 was the lower than that of corn silage. The total concentration of volatile fatty acids were higher for CS as 87.3 mM/dl than those of GS, GS0.5, GS1.0 and GSL as 44.7, 37.8, 46.3 and 47.2 nM/dl. However, the percentage of lactic acid concentration of ginseng silages such as GS, GS0.5, GS1.0 and GSL, 60.2, 77.2, 83.4 and 77.3% was higher than that in CS, 53.7% (p<0.05). The in vivo dry matter digestibilities for 72hr fermentation was higher in ginseng silages (GS, GS0.5, GS1.0 and GSL as 76.5, 75.8, 72.9 and 77.3%, respetively) than that in for CS as 52.1% (p<0.05). It can be concluded that silage added with ground corn (GS0.5 and GS1.0) and lactic acid inoculant were high in its quality, and the GS0.5 can be suggested as a practical method for red ginseng residues silage making.